andrewwardell
100+ Head-Fier
Are there any with a male 3.5mm out? I know there are some designed for use in cars but most of the headphone adapters I've come across have a female 3.5mm output.
TRINITY - PHANTOM/SAGARIS SERIES - Newer Thread (JUST IMPRESSIONS ETC - DO NOT POST ABOUT ORDER STATUS - COMPLAINING - ETC.)
- Thread starter Hi-Fi'er
- Start date
The trinity one will eventually show it just has to be a rebadged chi-fi one
Aevum
Headphoneus Supremus
- Joined
- May 15, 2007
- Posts
- 2,915
- Likes
- 491
Anyways,
The phantom master 4 has 0.75mm connectors, the issue is that they bought the connectors from god knows where and they expended on their own, especialy the left one in my case so the cable kept unplugging, i got tired of it and just used a 0.78mm plug on the connector to expand it.
I ordered one of these with the Westone W4R connector which is a 2 pin 0.78mm
https://es.aliexpress.com/item/Nuev...32839613373.html?spm=a2g0s.9042311.0.0.TvmE6K
range isnt stellar, but the CSR8645 supports APT-X HD Low latency,
The phantom master 4 has 0.75mm connectors, the issue is that they bought the connectors from god knows where and they expended on their own, especialy the left one in my case so the cable kept unplugging, i got tired of it and just used a 0.78mm plug on the connector to expand it.
I ordered one of these with the Westone W4R connector which is a 2 pin 0.78mm
https://es.aliexpress.com/item/Nuev...32839613373.html?spm=a2g0s.9042311.0.0.TvmE6K
range isnt stellar, but the CSR8645 supports APT-X HD Low latency,
slitzx
New Head-Fier
- Joined
- Jan 5, 2017
- Posts
- 43
- Likes
- 28
How's the battery on that cable? 4 hours I'm guessing?
Does it support HD and LL at the same time?
guysmileeey
Head-Fier
- Joined
- Oct 15, 2016
- Posts
- 76
- Likes
- 67
I've been using this bluetooth cable with my PM4 for mobile listening. Far from perfect, but a great value at $9. I bought two and just switch between them to charge.
https://www.gearbest.com/earbud-headphones/pp_712240.html
https://www.gearbest.com/earbud-headphones/pp_712240.html
guysmileeey
Head-Fier
- Joined
- Oct 15, 2016
- Posts
- 76
- Likes
- 67
Oh, and for the Master(or Icarus3) I sometimes use a male/male adapter to connect with an assortment of bluetooth modules.
andrewwardell
100+ Head-Fier
...so the website is down at the moment...
...not sure if it's been that way for a while, but it certainly isn't working now.
...not sure if it's been that way for a while, but it certainly isn't working now.
...so the website is down at the moment...
...not sure if it's been that way for a while, but it certainly isn't working now.
Been down for a while. Nothing new. They probably didn't pay their bill... This is the end... My only friend, THE END.
I have a Bluewave Get for that... DAC with amp circuit. Works great and has aptx-HD as well... The whole lanyard concept I don't really like. :\
guysmileeey
Head-Fier
- Joined
- Oct 15, 2016
- Posts
- 76
- Likes
- 67
I like that! Bluetooth 5! Canadian too! I bought the cheap ones to hold over until Bluetooth 5 for the increased range.
Remember that I'm looking for a pm6 if yours ever arrives. Anyone looking to sell msg me
It's a great device. Get is not for everyone though. They chose to put a high gain on the device, so it works for high impedance devices very well... Issue is, lower impedance gear will have a very noticeable hiss. They're working on an impedance adapter which they will ship out for everyone who hears the hiss...
For sure if I get my PM6, It'll go up for sale...
However, keep an eye on the buy/sell/Trade site. Some people did mention they wanted to sell it already...
Tommy C
Headphoneus Supremus
- Joined
- Aug 22, 2011
- Posts
- 2,119
- Likes
- 1,651
It's a great device. Get is not for everyone though. They chose to put a high gain on the device, so it works for high impedance devices very well... Issue is, lower impedance gear will have a very noticeable hiss. They're working on an impedance adapter which they will ship out for everyone who hears the hiss...
For sure if I get my PM6, It'll go up for sale...
@dave9527 has had a brand new pair up for grabs I believe.
dave9527
100+ Head-Fier
- Joined
- Feb 1, 2017
- Posts
- 335
- Likes
- 144
Just sold sorry
Ok, so for you Trinity haters, but Bob believers, here's your chance to score an IMR R1 at discount price again:
After putting a set to one side looks like I've been let down.
So I now I have one unit left that's open to sensible offer. Email me at info@imracoustics.com
Good luck
After putting a set to one side looks like I've been let down.
So I now I have one unit left that's open to sensible offer. Email me at info@imracoustics.com
Good luck
Users who are viewing this thread
