amb
Member of the Trade: AMB Laboratories
- Joined
- Apr 1, 2004
- Posts
- 4,933
- Likes
- 41
The HS-TWS is a bit undersized for the amount of heat the dynahi puts out. But as long as your case has good ventilation it should be ok.
Originally Posted by digger945 /img/forum/go_quote.gif The glass was a door on a stereo cabinet, very thick. I have a roll of adhesive backed sandpaper disks and just stuck them to the glass, sometimes two side by side(never overlapping) and rubbed the parts(bracket or HS) on the glass dry. To test the fit I put a drop of oil on the bracket and stuck it to the HS and if it was almost impossible to get the two apart I was satisfied it would work great with just thermal compound. All 4 brackets(balanced amp) had to be numbered as the holes were peculiar to each position. I actually mounted the brackets to the HS's with rubber washers to allow the bracket to expand and contract with heat but using the Conrad HS's everything stays pretty cool. Only the top of the actual outputs get kinda hotish. |