AUserName501
100+ Head-Fier
- Joined
- Feb 9, 2014
- Posts
- 468
- Likes
- 45
What the heck is happening with the T-Peos Altone 250 and 350? No information on it other than a few korean sites. Is it currently for sale?
I'm actually more interested in the 250 because it doesn't use the TWFK yet is still a hybrid Knowles BA + Dynamic. Hopefully, it won't be bright because the ER-4PT and HF5 aren't without the 75 ohm resistor.
T-Peos really should invest in making DC jacks where the housing isn't so long. The visual aesthetic also looks like it was cobbled together in a DIY store.
Dostory the ebay seller seems to be the only one selling them.
Altone 250
Altone 350
T-Peos Altone 250 Official Page
T-Peos Altone 350 Official Page
Altone 250

Altone 350

Altone 350 from Seeko

More information:
BA driver used is Knowles FK-26260-000. Tech sheet is here. The electrical impedance on the the tech sheet is saying 240 ohms at 1Khz but it's highly unlikely T-Peos would use that in an IEM. Perhaps they use a version with a different impedance.

Altone 250 Frequency Response - I don't know if this is compensated or raw. I suspect they are raw as this one was.

I adjusted the scales to compare the 200 and 250. The Altone 200 graph is from here. You can see the Altone 250 has a 13dB bass boost at 100Hz and a 19dB bass boost at 20Hz which is in my opinion excessive. The upper mids are slightly boosted and the treble is slightly lower which is an improvement over the overly bright TWFK but the 7Khz spike is still too high. It's a shame that the bass boost is so excessive because it moves from a warmer, funner sound that is still close enough to "neutral" and ends up pushing it firmly into the domain of bass heads.
Note that these graphs are raw and have not been compensated for the ear canal so don't start comparing them to graphs that have been compensated or expecting too see a flat line because a flat raw frequency response will not be as you hear it.



This is what "flat" looks like as an uncompensated "raw" frequency response. Below 1Khz the line should be flat to match the Olive-Welti Diffuse Field Target Curve but people do prefer a bass boost below 200Hz as the Harman-Karden Preferred Target Curve showed.
I'm actually more interested in the 250 because it doesn't use the TWFK yet is still a hybrid Knowles BA + Dynamic. Hopefully, it won't be bright because the ER-4PT and HF5 aren't without the 75 ohm resistor.
T-Peos really should invest in making DC jacks where the housing isn't so long. The visual aesthetic also looks like it was cobbled together in a DIY store.
Dostory the ebay seller seems to be the only one selling them.
Altone 250
Altone 350
T-Peos Altone 250 Official Page
T-Peos Altone 350 Official Page
Altone 250
Altone 350
Altone 350 from Seeko
More information:
BA driver used is Knowles FK-26260-000. Tech sheet is here. The electrical impedance on the the tech sheet is saying 240 ohms at 1Khz but it's highly unlikely T-Peos would use that in an IEM. Perhaps they use a version with a different impedance.
Altone 250 Frequency Response - I don't know if this is compensated or raw. I suspect they are raw as this one was.
I adjusted the scales to compare the 200 and 250. The Altone 200 graph is from here. You can see the Altone 250 has a 13dB bass boost at 100Hz and a 19dB bass boost at 20Hz which is in my opinion excessive. The upper mids are slightly boosted and the treble is slightly lower which is an improvement over the overly bright TWFK but the 7Khz spike is still too high. It's a shame that the bass boost is so excessive because it moves from a warmer, funner sound that is still close enough to "neutral" and ends up pushing it firmly into the domain of bass heads.
Note that these graphs are raw and have not been compensated for the ear canal so don't start comparing them to graphs that have been compensated or expecting too see a flat line because a flat raw frequency response will not be as you hear it.
This is what "flat" looks like as an uncompensated "raw" frequency response. Below 1Khz the line should be flat to match the Olive-Welti Diffuse Field Target Curve but people do prefer a bass boost below 200Hz as the Harman-Karden Preferred Target Curve showed.