[hackstu]

Looking into some spinfits, for a sony xba-40. Which model would it be? CP100?

 

[Colors]

Looking into some spinfits, for a sony xba-40. Which model would it be? CP100?

Best would be to email the company. I've done it a couple of times and they're very specific and responsive.

 

[moedawg140]

Looking into some spinfits, for a sony xba-40. Which model would it be? CP100?

Single flange would be CP100.

 

[mottykytu]

Please Help, I JUST BOUGHT a Spinfit CP 100 (size S) for my K10U , but it cannot FIT the Nozzle , Because The Nozzle of k10 U is too big for the size of CP100 (But in the model guide, spinfit say cp100 can fit K10U Well ) is some one here using the CP100 with K10u ?? (Especially Size S) please tell me how can you Install it to the K10U??

Thank alot !

 

[ScottFree]

Please Help, I JUST BOUGHT a Spinfit CP 100 (size S) for my K10U , but it cannot FIT the Nozzle , Because The Nozzle of k10 U is too big for the size of CP100 (But in the model guide, spinfit say cp100 can fit K10U Well ) is some one here using the CP100 with K10u ?? (Especially Size S) please tell me how can you Install it to the K10U??

Thank alot !

Based on personal experience the CP100 S can definitely fit the K10U's nozzle but it does take a bit of effort especially with fresh tips. I turn the flange inside out. Rest the sound tube against the nozzle of the IEM at an angle and then slide the tube over the nozzle. You only want to push the Spinfit tip onto the nozzle until the end of the IEM's nozzle is just below the cushion in the middle of the tip.

 

[MD Alimur Rahman]

I'm interested to order spinfit for my Jabra Elite 65t true wireless..has anyone already using it on any of the true wireless..does it make the sound better..please advice..

 

[C_Lindbergh]

Is there any cheap store to purchase CP 800 (Large) in Europe? My country Sweden faces extra import fees from outside EU so I can't really order them from AliExpress like I used to without the price going up by a lot..

Atm I run with 2x CP 800 Medium, but it feels like one of the eartips doesn't seal properly, so I'd really like to try a Large as well.

Aslo have anyone gone from the CP 800 to the double flanged Cp 240 (with the 3.mm insert)? Will it provide more isolation?

 

[baiyy1986]

Hi there, I want to share some thought about SpinFit CP240 S,
First I used it with my Layla and Roxxane. It is not comfortable with both, and on both, It boosts the mid and lowers the bass a lot, I thought maybe because of the fit it just loses almost all the bass. It definitely makes IEMs sound much more clean and separation. But overall I just don't like the sound pair with both IEM, I am very disappointed at that time. I mean, it is 10 bucks for one pair. And it makes my IEM sound totally different and in a bad way.
So I think that is it. but then I tried it with my Noble X, huge difference experience! The fit is perfect, the IEM sound full, bigger soundstage, cleaner sound, boost mid!
So I think it depends on the insertion, Roxxane and Layla both have deeper insertion already, so CP240 make them even deeper, which may be not a better opinion.
Noble X, on the other hand, shorter insertion and CP240 make it deep enough.
Therefore this is my theory, maybe wrong, but if you already have a deep insertion IEM, don't buy it, I will try CP800 in the future to see what happened. If your IEM has a shorter insertion, I think this is for you.

 

[BeezBee]

Hi everyone, does someone here has tried pairing cp220 M with ibasso it01 ?
I need an impression of it

 

[435279]

Hi everyone, does someone here has tried pairing cp220 M with ibasso it01 ?
I need an impression of it

Yes I did but I went back to the MandarinEs Symbio Eartips they fit and sound better for me.

 

[Crumblenaut]

Hi everyone, does someone here has tried pairing cp220 M with ibasso it01 ?
I need an impression of it

I recently bought a pair of CP220's and CP240's to try on the it01's - Both tips fit the iBasso's fine but the 220's aren't big enough for me to get a seal.
As for the 240's - to my ears, compared to the Spiral Dots i've been using, they seem to produce a more balanced sound with a slight drop in bass, they also seem to give a bigger soundstage and add some depth to the music.
I really like them sound wise, I just find them a bit uncomfortable after a while, hopefully just need to get used to the fit, having never used double flange type tips before.

 

[Zeo-Gold92]

I've been using the S size of stock eartips for the Fidue A73 and find this pretty good combination. Just wondering if it'll translate to the S size of the spinfits? Curious to try but wondering if theres a differnce in size between them. New to tip rolling and didn't wanna order until I was sure.

 

[Zelda]

​

Got a set of the newer SpinFit tips, the CP145 model, which seems to be the more standard option.

Silicone material is too similar if not identical to the ‘dual-blade’ bi-flange series. It takes the same principle as the CP100 first model, though extend the flange more to match more the inner core length, and thus provide a better and tighter seal inside the ear canal.

The fit is similar to the CP100 or CP800 single flanges, though with the longer design fit may be a bit shallower with some IEMs. Simply put, the CP145 works the same way as the CP100, so those who got a perfect seal with those shouldn’t get a better experience with the new ones. However, with certain IEMs that were more picky the longer flange can be critical.

I used the CP145 mostly with the Dunu IEMs, DK-3001, DN-2002 and Falcon-C, and also with the newer Lear Kaleido, those that didn’t get the best results with the CP100. There are no real changes in sounds, though with the CP145 sealing more of the ear canal I got a fuller bass response with more sub-bass impact and extension and little less harsh treble response and a little bit less unnatural than with the CP100.

​

 

[webvan]

I've looking at getting some Spinfit tips for my Jabra Elite Sport truly wireless earbuds and it seems the CP100Z are the way to go ? Does anyone here have some experience with these ? Thanks !

 

[noplsestar]

Hi there, can someone tell me the difference between the cp240 and the cp220? Because Mim wrote in his Prophile8 review that he found the cp220 were best. But on the spinfit website the cp220 is nowhere to be seen.