@Shanling Could we at least have a rough estimated price please? Would be nice to know cause I myself and many others here (I'm sure) have been considering the Fiio BTR5.A proper ES100 / BTR5 competition I see.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Shanling UP4 & UP2 - Bluetooth 5.0 DAC/AMP with ES9218P, balanced output, supporting LDAC, HWA LHDC, aptX HD, aptX Low Latency, aptX and AAC.
- Thread starter Shanling
- Start date
Hi @Shanling @all
Having my UP2 since today, I'm facing one issue, when i turn the knob to change volume, either both directions will lift the volume, or it doesn't work at all till I reboot the device.
Is somebody else facing this issue?
except this, awesome Device! best BT Audio receiver I used so far (coming from a Bluewave GET).
Glued it to the side of my Oppo PM3 and created a super short cable, working just perfect overall
Thanks!
Did you update firmware to latest V1.4?
Hi @Shanling , hi all
I am about to purchase the up2, and one of the purpose will be to watch TV at night while the family sleeps, using headphones from 32 to 80ohms. I want to make sure it will be detected by my Sony TV, wich only connect with A2DP Bluetooth profiles. Will the UP2 be detected by my TV?
I can't find the information anywhere, thank you in advance.
UP2 shows to other devices as Bluetooth headphones, so if your TV can work with standard BT headphones, it should work with UP2 also.
Shanling is on fiyah!
Will these double DACs work as dual mono for 3.5 output? Can you tell us the size of the device?
For that we have the Dual DAC mode. Both DACs active in Single-ended and with more power.
@Shanling Could we at least have a rough estimated price please? Would be nice to know cause I myself and many others here (I'm sure) have been considering the Fiio BTR5.
Will get it to you as soon as somebody tells me.
Have any question about our players? Just PM me or send me email.
Stay updated on Shanling at their sponsor profile on Head-Fi.
|
Introducing Shanling UP4, extra powerful balanced Bluetooth Amplifier.
Key specification:
- Can be connected to computer to serve as USB DAC
Limited to 48k rate or not?
Limited to 48k rate or not?
Yes, USB input is limited to 16/48.
Have any question about our players? Just PM me or send me email.
Stay updated on Shanling at their sponsor profile on Head-Fi.
|
Yes, this was the first thing I did.Did you update firmware to latest V1.4?
Yes, this was the first thing I did.
Please send me PM, will try to look deeper into this problem.
Have any question about our players? Just PM me or send me email.
Stay updated on Shanling at their sponsor profile on Head-Fi.
|
Nolbert0
100+ Head-Fier
How much does the up4 weigh?
*Edit - also dimensions?
*Edit - also dimensions?
Last edited:
How do the UP4s abilities stack up against the M0? I'd likely be using it as a USB DAC.
holsen
Headphoneus Supremus
I've got the M5s and UP2. I've also got a BTR3. As a USB DAC, the UP2 creams the the BTR3, it's cleaner and less congested. So I am certain the The UP4 with dual DACs will surpass the UP2 and although my UP2 is only a month old I'll be getting the 4!
Ynot1
500+ Head-Fier
I wonder if UP4 balance would be better than UP2 with Ibasso DC01 balance, assuming this is supported by the usb dac.
I suppose you can try two different balance if UP4 supported usb dac function with Ibasso DC01.
Furthermore if UP2 can work with usb dac via otg and a hub for power then E1DA which is power hungry, then UP2 too can run different balance option.
I suppose you can try two different balance if UP4 supported usb dac function with Ibasso DC01.
Furthermore if UP2 can work with usb dac via otg and a hub for power then E1DA which is power hungry, then UP2 too can run different balance option.
Last edited:
How do the UP4s abilities stack up against the M0? I'd likely be using it as a USB DAC.
UP4 is dedicated Bluetooth amplifier, so more codec supply, better quality of signal and of course balanced with dual DAC compared to M0.
But USB input on UP4 is limited to 16/48, so if you want to play Hi-Res, you need to go with M0.
I wonder if UP4 balance would be better than UP2 with Ibasso DC01 balance, assuming this is supported by the usb dac.
I suppose you can try two different balance if UP4 supported usb dac function with Ibasso DC01.
Furthermore if UP2 can work with usb dac via otg and a hub for power then E1DA which is power hungry, then UP2 too can run different balance option.
UP2 is not digital transport, so it can't be used with iBasso.
Have any question about our players? Just PM me or send me email.
Stay updated on Shanling at their sponsor profile on Head-Fi.
|
pigdoyou2000
New Head-Fier
Do you support shanling up4 usb dac 32/384?
Tai Truong
New Head-Fier
hi Shanling,
Finally i got the SU2 and it's great product.
My concern is how to connect the SU2 with laptop through cable C? juts plug-in cable to laptop and SU2 ?
I already update latest firmware v1.4 for SU2
Finally i got the SU2 and it's great product.
My concern is how to connect the SU2 with laptop through cable C? juts plug-in cable to laptop and SU2 ?
I already update latest firmware v1.4 for SU2
rkw
Headphoneus Supremus
See post #319.Do you support shanling up4 usb dac 32/384?
Do you support shanling up4 usb dac 32/384?
No, limited to 16/48.
hi Shanling,
Finally i got the SU2 and it's great product.
My concern is how to connect the SU2 with laptop through cable C? juts plug-in cable to laptop and SU2 ?
I already update latest firmware v1.4 for SU2
Connect it to computer with USB-C cable and then turn on UP2. LED should change colour from red to purple.
Have any question about our players? Just PM me or send me email.
Stay updated on Shanling at their sponsor profile on Head-Fi.
|
Users who are viewing this thread
Total: 2 (members: 0, guests: 2)