[Sylean]

It's connected but it does not show the BT screen as before.

As to the SD, while connected I can browse it and start a song, but soundless.

I'll give the reset a try and let you know.

So I reseted. I could pair and the BT screen appeared just fine, so did the streaming. Though when I left the screen, impossible to get it back...

 

[Shanling]

So I reseted. I could pair and the BT screen appeared just fine, so did the streaming. Though when I left the screen, impossible to get it back...

To enter BT receiver mode again, you should be able to simply restart Bluetooth on M0 or your phone and the connect again.

 

[SupperTime]

This can receive Bluetooth and at the same time output the music via USB Out?

Anyone selling a used one?

 

[SupperTime]

When you have it connected to your phone, does the M0 show the proper screen of BT receiver as before? Can you try factory reset on the M0 and do fresh pairing with your phone?

Not sure how is playback from micro SD card connected to Bluetooth receiver function?

Can I bluetooth to m0 and USB out to my desktop dac/amp? In bit perfect?

 

[Shanling]

Can I bluetooth to m0 and USB out to my desktop dac/amp? In bit perfect?

Yes, M0 can be used as BT Receiver and Digital transport over USB at the same time.
As you are streaming music over Bluetooth, it will not be bit perfect. And it will depend on Bluetooth codec you will use.

 

[SupperTime]

Yes, M0 can be used as BT Receiver and Digital transport over USB at the same time.
As you are streaming music over Bluetooth, it will not be bit perfect. And it will depend on Bluetooth codec you will use.

It won't be bit perfect? I will stream it over in bit perfect using ldac just basic flac files?

 

[shootertwist]

I’m about to buy this one but just want to make sure it will be able to do this one - i will use the m0’s bluetooth receiver function and stream from my phone the audio source, say tidal, via ldac then the m0 (which will be connected to my chord mojo) will be able to transfer that via digital out to the mojo? Essentially this will allow me to have just the m0 connected to the mojo and my phone will just be in my pocket and switch my songs from there... thanks in advance

 

[SupperTime]

I’m about to buy this one but just want to make sure it will be able to do this one - i will use the m0’s bluetooth receiver function and stream from my phone the audio source, say tidal, via ldac then the m0 (which will be connected to my chord mojo) will be able to transfer that via digital out to the mojo? Essentially this will allow me to have just the m0 connected to the mojo and my phone will just be in my pocket and switch my songs from there... thanks in advance

Yes, that is possible, but now shanling Is saying it's not a bit perfect transport, even with streaming out ldac via uapp in Android for example

 

[shootertwist]

Yes, M0 can be used as BT Receiver and Digital transport over USB at the same time.
As you are streaming music over Bluetooth, it will not be bit perfect. And it will depend on Bluetooth codec you will use.

Seems like this already answered my question too thanks so much
And ldac bluetooth connection is stable on m0? I remember when i had the hiby r6 and dx160 their bluetooth connection was very flaky even when the devices are near each other...

 

[SupperTime]

Seems like this already answered my question too thanks so much
And ldac bluetooth connection is stable on m0? I remember when i had the hiby r6 and dx160 their bluetooth connection was very flaky even when the devices are near each other...

Reports show latest software to have some Bluetooth connectivity issues, I think latesr FW is 3.2.maybe get on the one before that?

 

[technobear]

Firstly, LDAC is not bit perfect.

Second, LDAC pushes the limits of Bluetooth. It's OK if you are the only one using Bluetooth. If you are in an area with many Bluetooth users, you may have to settle for a lesser codec.

Bluetooth is a bit like the motorcar. It's great when you have the road to yourself. When there are too many cars trying to use the same road, chaos ensues.

 

[Gazny]

@shangling Any way to remove auto profiles for TX/RX modes? I have a Transmitter/receiver in transmit mode, but it never works because of auto profiles. I would love to use the M0 as a receiver with my transmitter. I have tried many codecs but none work.

 

[Shanling]

It won't be bit perfect? I will stream it over in bit perfect using ldac just basic flac files?

With Bluetooth streaming, you are getting the LDAC quality, not bit-perfect version of your original file.

If you want to have wireless in higher quality, you would need to get M2X and use Airplay/DLNA over Wi-Fi
.

I’m about to buy this one but just want to make sure it will be able to do this one - i will use the m0’s bluetooth receiver function and stream from my phone the audio source, say tidal, via ldac then the m0 (which will be connected to my chord mojo) will be able to transfer that via digital out to the mojo? Essentially this will allow me to have just the m0 connected to the mojo and my phone will just be in my pocket and switch my songs from there... thanks in advance

Yes, it can be used like this.

@shangling Any way to remove auto profiles for TX/RX modes? I have a Transmitter/receiver in transmit mode, but it never works because of auto profiles. I would love to use the M0 as a receiver with my transmitter. I have tried many codecs but none work.

What auto profiles are you talking about please?

 

[rastikae]

@@ Shanling
Hello. I tried to connect the mifo o7 headphones to the m0 player, firmware 3.2. They connect for a very long time. The sound is not adjustable and very quiet. The headphones in the case for charging the headphones do not reconnect, you can connect only through the BT menu.

 

[RobinFood]

@Shanling is there any chance to see SBC XQ added on a later update?