[earfonia]

 

I have 937 <$15 earphones.
 
I guess ONE more can't hurt.....
 

TWIN

 
Ho ho ho... that's super cool! Please give us a shout when you hit 1000 

 
Wondering what will be the TWIN's 1000th earphone!

 

[Lohb]

Hey @TwinACStacks
 
The IEM500 is 17 ohms FYI
 
IEM500: Drivers                 8 mm Woofer and 5.8 mm Titanium Diaphragm Tweeter / channel   
DCR                     17 ohms / channel
Sensitivity             106 dB / 1 Watt @ 1 kHz
Distortion              average distortion < 1% @ 100dB drive level
Freq. Response     20 Hz to 19 kHz
Microphone           High Sensitivity Electret Microphone
 
 
Will you be getting an IEM500 thread rolling so it does not cross over with the Rock stuff ?

 

[ItsXatu]

May I know what eartips you guys are using for the Mula's? Just got these, and find that.....good sound, but the isolation is bad with stock tips, and I feel like o may be missing out a little

 

[TwinACStacks]

  Hey @TwinACStacks
 
The IEM500 is 17 ohms FYI
 
IEM500: Drivers                 8 mm Woofer and 5.8 mm Titanium Diaphragm Tweeter / channel   
DCR                     17 ohms / channel
Sensitivity             106 dB / 1 Watt @ 1 kHz
Distortion              average distortion < 1% @ 100dB drive level
Freq. Response     20 Hz to 19 kHz
Microphone           High Sensitivity Electret Microphone
 
 
Will you be getting an IEM500 thread rolling so it does not cross over with the Rock stuff ?

That would be 17 ohms PER channel. Wired in series its apprx. 34 ohms, about what I figured.
 
No, I'm not hyping the IEM500 in any way.  If people want to try it go for it. Someone else can start a thread if they are inclined.
 

TWIN

 

[1clearhead]

May I know what eartips you guys are using for the Mula's? Just got these, and find that.....good sound, but the isolation is bad with stock tips, and I feel like o may be missing out a little

Try these aftermarket wide-bore silicone tips. They give me a really wide and engaging soundstage and the balance is nicely done. They seal nice and snug for me. Though, others may differ, but you already got them and as you say they sound good to you.
So, try these for a better seal and wider soundstage. Heck, for the price? The build quality on these are really great as well.

 
https://item.taobao.com/item.htm?spm=2013.1.20141002.13.OLr13Y&scm=1007.10009.12973.100200300000001&id=19733885620&pvid=01372294-f5af-43c0-a8d8-b70602ded1a2

 

[Lohb]

Did I buy the right ones for ZIRCON to control the bass and bring up the mids ?
 
http://www.ebay.co.uk/itm/141721545729?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

[ItsXatu]

Try these aftermarket wide-bore silicone tips. They give me a really wide and engaging soundstage and the balance is nicely done. They seal nice and snug for me. Though, others may differ, but you already got them and as you say they sound good to you.
So, try these for a better seal and wider soundstage. Heck, for the price? The build quality on these are really great as well.

https://item.taobao.com/item.htm?spm=2013.1.20141002.13.OLr13Y&scm=1007.10009.12973.100200300000001&id=19733885620&pvid=01372294-f5af-43c0-a8d8-b70602ded1a2

So I'm guessing JVC Spiral dots will do the trick? Or RHA tips?

 

[1clearhead]

  Did I buy the right ones for ZIRCON to control the bass and bring up the mids ?
 
http://www.ebay.co.uk/itm/141721545729?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 
Yup, they might just do this for the Zircon's. They look nice in blue, too!

So I'm guessing JVC Spiral dots will do the trick? Or RHA tips?

 
Can not say, since I don't have any of those. But, with the many tips that I carry, the one's I showed you in the link did it for me.

 

[joemama]

  Did I buy the right ones for ZIRCON to control the bass and bring up the mids ?
 
http://www.ebay.co.uk/itm/141721545729?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Yes you did. In fact I use these. The KZ blue core tips sold with the ED10 will also work as well.

 

[CADCAM]

After extensive listening and tip rolling with the Mula's they are going to the back of the drawer. I wish they sounded as good as they look...
 
btw still no Zircon's after 30+ days

 

[Podster]

After extensive listening and tip rolling with the Mula's they are going to the back of the drawer. I wish they sounded as good as they look...

btw still no Zircon's after 30+ days

Ah yes, the old iem graveyard as I call it Sorry to hear your Zircon's have not made it yet, reminds me I need to look back and see when I ordered mine

 

[slowpickr]

  After extensive listening and tip rolling with the Mula's they are going to the back of the drawer. I wish they sounded as good as they look...
 
btw still no Zircon's after 30+ days

Glad I passed on the Mulas (I've learned to ignore certain people's comments).  Anyway, sounds like your Zircons are MIA. I live in the US also and it typically takes 10 to 14 days to get Aliexpress orders.

 

[Igor Eisberg]

  After extensive listening and tip rolling with the Mula's they are going to the back of the drawer. I wish they sounded as good as they look...
 
btw still no Zircon's after 30+ days

Yep, the Mula's are pretty weak compared to other earphones.
 
I've been enjoying the powerful sound of Plextone X41M lately. Crazy bass and sub-bass performance. A bit warmer on the highs tho.

 

[ItsXatu]

Yep, the Mula's are pretty weak compared to other earphones.

I've been enjoying the powerful sound of Plextone X41M lately. Crazy bass and sub-bass performance. A bit warmer on the highs tho.

Really? I find the Mulas better than the KZ ED3. Wonder what else would be better though...

 

[1clearhead]

Really? I find the Mulas better than the KZ ED3. Wonder what else would be better though...

+1 .....I learned not to assume an earphone sounds bad through someone else's ears. The Mula's are pretty good. It's simple.....take time to burn them in, "tip-roll them" and finally, enjoy.