[alxw0w]

Anyone tried pairing it with Sennheiser HD800?
And use some negative gain on preamp so I can add like 4-6db of bass boos with eq.

 

[Tano]

Anyone tried pairing it with Sennheiser HD800?
And use some negative gain on preamp so I can add like 4-6db of bass boos with eq.

I use it almost on daily basis with my HD800s with an EQ which has 6,5db of bass boost and a negative preamp of -7db. It drives It without any problem on normal gain. You shouldnt have any issues unless you listen to unhealthy levels.

 

[HiFi Oasis]

My T-71 suddenly won't turn on anymore. Anyone else had this happen?

Yes, after a firmware update. You probably just need to for reset it:

The T71 firmware could get into unexpected corner cases, and T71 can be locked and unresponsive.
• In this case, please press the orange button for 10 seconds.
• It will reset the system forcibly.

From the manual, page 14. https://drive.google.com/file/d/1zXtwc2wmOe_ArqTDASqQwQ7wcx0nwrl8/view

If that doesn't work contact Qudelix support, they are excellent to deal with.

 

[pkay]

My T-71 suddenly won't turn on anymore. Anyone else had this happen?

Try force resetting. Press the orange button for 10 seconds.

 

[Ferdinando1968]

My T-71 suddenly won't turn on anymore. Anyone else had this happen?

Excuse me for formulating this hypothesis,
but aren't you using the wrong USBC connector,
i.e. the one intended for headphones and not the power/audio input one?

 

[Merkurio]

Excuse me for formulating this hypothesis,
but aren't you using the wrong USBC connector,
i.e. the one intended for headphones and not the power/audio input one?

Happened to me a couple of times, lol.

 

[Ferdinando1968]

Happened to me a couple of times, lol.

Happened to me also

 

[DarginMahkum]

Looks like with the new FW the product ids changed (again). Here are the new rules for Linux users:

# Stereo / 384 KHz / FS 44.1x KHz with MIC
KERNEL=="hidraw*", ATTRS{idVendor}=="1fc9", ATTRS{idProduct}=="7330", MODE="0666"
# Stereo / 384 KHz / FS 48 KHz with MIC
KERNEL=="hidraw*", ATTRS{idVendor}=="1fc9", ATTRS{idProduct}=="7331", MODE="0666"
# Stereo / 384 KHz / FS ALL
KERNEL=="hidraw*", ATTRS{idVendor}=="1fc9", ATTRS{idProduct}=="7332", MODE="0666"
# 7.1 Surround / 96 KHz / FS 44.1x KHz with MIC
KERNEL=="hidraw*", ATTRS{idVendor}=="1fc9", ATTRS{idProduct}=="7310", MODE="0666"
# 7.1 Surround / 96 KHz / FS 48 KHz with MIC
KERNEL=="hidraw*", ATTRS{idVendor}=="1fc9", ATTRS{idProduct}=="7311", MODE="0666"
# 7.1 Surround / 96 KHz / FS ALL
KERNEL=="hidraw*", ATTRS{idVendor}=="1fc9", ATTRS{idProduct}=="7312", MODE="0666"
# PS5
KERNEL=="hidraw*", ATTRS{idVendor}=="1fc9", ATTRS{idProduct}=="7400", MODE="0666"
# NSW
KERNEL=="hidraw*", ATTRS{idVendor}=="1fc9", ATTRS{idProduct}=="7401", MODE="0666"

 

[noplsestar]

Hey guys, I just flipped through the 22 pages. Interesting device. I have got the Quloos MUB1 as well as the Calyx K in my possession. Anyone here who can say something to the 2-channel output of the t71? How is the „normal“ stereo sound compared to similarly priced DAC dongles?

 

[TombotUK]

I'm sad there is still no Cross feed for 2 channel on the T71, unlike the 5K.

 

[neobandog1]

Can compare mub1 and t71 for sound quality?

 

[neobandog1]

I have now fiio q15 very nice sounding but i m interesting also for mub1 or t71

 

[Tano]

Hi, guys. Im having a couple lf issues with my T71 after the update.

First one and most important, when I use UAPP on my phone, It sounds at a very low volume. It was totally fine before the T71 firmware update.

Second one it's not important and I could be wrong, but I think that before the update, my screen was turning off completely. With the new update, the screen doesn't show anything, but the backlight is still on.

Anyone experiencing the same?
Thanks!

 

[rael67]

No problem with sound via iPhone after the update, but I have the same issue with the backlight.

 

[DarginMahkum]

Hi, guys. Im having a couple lf issues with my T71 after the update.

First one and most important, when I use UAPP on my phone, It sounds at a very low volume. It was totally fine before the T71 firmware update.

Second one it's not important and I could be wrong, but I think that before the update, my screen was turning off completely. With the new update, the screen doesn't show anything, but the backlight is still on.

Anyone experiencing the same?
Thanks!

There is something weird in the two channel mode. Was it always like this (instead of L and R, we have FL, M and FR)?