3amsleep
New Head-Fier
- Joined
- Jun 23, 2008
- Posts
- 26
- Likes
- 0
here´s my pcb for my cmoy AD8066 amp. any suggestions before i manufacture it??
*----
updated my pcb/schematics to reflect the suggestions made. i also added a simple wallpower/nimh charger section.
*---
updated my PCB again.
added pinouts for an Alps 10K pot, redid the traces to let the ground plate flow everywere but near the AD8066 to prevent oscilation, and lowered the gain to 6.
*input caps are optional, i´ll jumper them if i dont need them.
the schematic says 0.1uF for bypass caps, but i´ll try 0.01uf first.
*----
updated my pcb/schematics to reflect the suggestions made. i also added a simple wallpower/nimh charger section.
*---
updated my PCB again.
added pinouts for an Alps 10K pot, redid the traces to let the ground plate flow everywere but near the AD8066 to prevent oscilation, and lowered the gain to 6.
*input caps are optional, i´ll jumper them if i dont need them.
the schematic says 0.1uF for bypass caps, but i´ll try 0.01uf first.