NeilR
500+ Head-Fier
- Joined
- Dec 2, 2005
- Posts
- 929
- Likes
- 12
Quote:
I agree.... even if the resistor leads are not touching one of the other tube sockets now, it may when it gets cased up. If it were me, I would put some sleeving on the leads- either heat shrink or the sleeve from some insulated wire. The wire is laying next to (or touching) pin 1, which is the grid. Putting 12V on the grid is not a good idea....
Originally Posted by jl123 Is it me or do those resistors on the bottom of the tube sockets look like they're touching something they shouldn't...? |
I agree.... even if the resistor leads are not touching one of the other tube sockets now, it may when it gets cased up. If it were me, I would put some sleeving on the leads- either heat shrink or the sleeve from some insulated wire. The wire is laying next to (or touching) pin 1, which is the grid. Putting 12V on the grid is not a good idea....