ilikepooters
500+ Head-Fier
Quote:
Some people think the fuse impacts sound
Now i've heard it all
Some people think the fuse impacts sound
hi, i received my d1 couple days back and accidentally selected 110V instead of 230V
which fried the fuse, so i replace the fuse with a 6.3A
is this the correct part to use? i can turn it on now but a bit worried if there is any side effects if i'm using wrong fuse
thanks.
6.3A???? Is the fuse rating on D1 so high? I have no D1 with me now so I cant check. My current DAC rating is only 0.5A.
Putting a fuse with amphere rating that exceeds the original one may cause damage to your D1 in the event of current surge (the fuse does not blow when it is supposed to).
Also, fuse comes in fast blow or slow blow configuration. You need to get both the rating as well as the blow type correct.
I checked the fuse it only has a F025A or maybe F0.25A indication, its not properly engraved..which means its actually 0.25A?
I don't have knowledge in electronics unfortunately, i had to asked a friend to advice me what type of fuse used commonly for a product with power selector.
might be 0.25a fast blow.
having a 6a fuse will allow an excess current of 5.75a going through the fuse and damaging your d1 in the event of power surge, defeating the purpose of having a fuse in the first place.
not that such things happen frequently but it is as good as not having any fuse at all because it won't blow when its supposed to.
So i guess my safest bet is to find equivalent fuse value then.
Any other way to find out the actual value needed rather than checking the fuse itself?
Now i've heard it all
OPA1611 bests the OPA627?? I might have to get one of those.... unfortunately I was unable to find an 8DIP packaging for either the OPA1611 or OPA1612 (it is my understanding that the 1612 is just the dual version of the 1611 which might save me some time and headaches)
where did you buy your 8DIP 1611 if I may ask?
So, I recently bought the D1.... and there is a horrible buzzing / static / crackling sound particular apparent during higher female vocals (Regina Spektor, Fine Frenzy). It's even apparent in some male vocals like Fleet Foxes. I current have the D1 hooked up via USB and going with RCA through the tube pre-outs into an AV receiver.
I've never heard this kind of distortion before, not even from a crappy laptop sound card. Any ideas on what might be the issue? I'm thinking it's not the tube, maybe one of the opamps? I emailed Ryan, but haven't gotten a response yet.
Does anyone try it with audio gd- sun with lcd-2?