cirodts
Headphoneus Supremus
- Joined
- Jan 27, 2016
- Posts
- 1,925
- Likes
- 422
for the loxjie p20 it makes a better ifi power 12v or 15v?
As far as I know, if it is marked as a 12VDC appliance, it should be supplied with 12VDC only.for the loxjie p20 it makes a better ifi power 12v or 15v?
Any known trusted seller for them?Install Reflektor 6N3P-DR Tubes (1980 NOS).
Do you mean the 6n3p-dr tubes?are they better than g and 5670 as sound?
Any know trusted seller for them?
I've found a few listings on Ebay but the prices asked are significantly varying.
- https://www.ebay.com/itm/133598278899 ($12)
- https://www.ebay.com/itm/164640529971 ($19)
- https://www.ebay.com/itm/254407450369 ($25, but non-reflektor)
let us know if they sound better than the ge5670.Do you mean the 6n3p-dr tubes?
If so, from what I've read, yes, but I haven't tested them yet.
EDIT: The were purchased on 15-MAR-20.
On 15-MAR-21, I bought a set of 4 tubes for US$24, from a Ukrainian vendor named "sarmat1968" - https://www.ebay.com/usr/sarmat1968
okay, i will stay with my ifi power 12v
Stay updated on iFi audio at their sponsor profile on Head-Fi.
|
Try swapping the l and r tubesI have the ge 5670, it happens to you that they do not fit well?
Do they clip very little to the crown and don't go all the way down for a good connection?
link Reflektor 6N3P-DR, thanks.I saw it mentioned (on a different thread) a couple of years ago, when Amazon had it for $80 on the Prime Day Sale.
.
Since then, I have done some Mods -
Cut the case in-half.
Install sockets for the op-amps.
Install additional filter caps for the op-amps.
Unsolder the series resistors, to turn off the LEDs under the Tube sockets.
Add tube risers.
Install Reflektor 6N3P-DR Tubes (1980 NOS).
Install ~$250 worth of OPA627AU op-amps to drive the outputs.
link Reflektor 6N3P-DR, thanks.