[ls13coco]

Anyone with comparisons to the MCTH? I have a LD1+ with a Burson V5i op-amp and Mullard M8100 tubes, does well. I mostly use planars and the MCTH seems quite appealing for the price.
I was going to hold out for the Liquid Platinum, but at that price.. I'm going the route of patience to see what may come next in terms of hybrid tube amps from the DR.

 

[bundy]

Hi all i have a question am i able to use 6J1OP tubes i my Little Dot 1+?
Many thanks Allan

 

[trivium911]

I was always curious about one thing with this amp, what voltage does it output to the headphones? Is it dependent on the gain setting or the volume control?

 

[eldus]

.

 

[Onik]

Would there be any major problems using the headphone out of the Little Dot 1+ as a preamp out to an AVR? Or is this "bad" or "wrong"?

Very bad Idea

 

[baldera]

Hello everyone, I was looking at this thread and thinking about swapping my opamp, so I found out a lot of people talking about muses02.
Found this on ebay, but the price seems very low, is this the real deal?
https://www.ebay.com/itm/1pcs-MUSES...883635?hash=item5b5ad440f3:g:0YMAAOSwYX9dRDG4

Thanks!

 

[trivium911]

Hello everyone, I was looking at this thread and thinking about swapping my opamp, so I found out a lot of people talking about muses02.
Found this on ebay, but the price seems very low, is this the real deal?
https://www.ebay.com/itm/1pcs-MUSES...883635?hash=item5b5ad440f3:g:0YMAAOSwYX9dRDG4

Thanks!

I swapped in a Muse02 chinese knockoff from alliexpress, no complaints and the sound smoothed out and was less harsh on the higher end!

 

[JackSkully]

Hi everyone I just bought a little dot 1+ from a heafier a few days ago but it seems the left channel has stopped working due to the 1/4 connection. Any way to fix this ??

 

[trivium911]

Hi everyone I just bought a little dot 1+ from a heafier a few days ago but it seems the left channel has stopped working due to the 1/4 connection. Any way to fix this ??

Likely need to solder a new connector on. Are you sure its not the cable? You can also try an alcohol soaked q-tip.

 

[Yaska729]

Hi everyone I just bought a little dot 1+ from a heafier a few days ago but it seems the left channel has stopped working due to the 1/4 connection. Any way to fix this ??

If the problem still occurs, maybe the best idea is to send it back to Little Dot and have them fix it for you. Little Dot offers life time repairing for all of their devices, but the shipping fee is always a killer though....

 

[JackSkully]

If the problem still occurs, maybe the best idea is to send it back to Little Dot and have them fix it for you. Little Dot offers life time repairing for all of their devices, but the shipping fee is always a killer though....

Actually I was able to fix it myself had to open it up and figured out that it was the RCA cable connection. So I desoldered and resoldered it back and it was fixed

 

[trivium911]

Actually I was able to fix it myself had to open it up and figured out that it was the RCA cable connection. So I desoldered and resoldered it back and it was fixed

Im looking for replacement RCA's for mine, they are a bit loose unless that is normal. I also bought mine used on here.

 

[JackSkully]

Im looking for replacement RCA's for mine, they are a bit loose unless that is normal. I also bought mine used on here.

try tightening the rca jacks with pliers

 

[trivium911]

try tightening the rca jacks with pliers

are you saying the cable? or the connector on the LD itself.

 

[JackSkully]

are you saying the cable? or the connector on the LD itself.

Connecter on the ld itself