[ron2ron]

Does the heat, actually, depend on battery level: less level - more heat?

I noticed the heating issue at 30% battery level

 

[Lurker0]

I noticed the heating issue at 30% battery level

Then it is normal: to supply the same power, the less voltage - the more current. The current produces the heat.

 

[ron2ron]

Then it is normal: to supply the same power, the less voltage - the more current. The current produces the heat.

I see. Thank you very much for the prompt reply.

 

[AGranada]

I noticed the heating issue at 30% battery level

I also noticed high temperature under 30%. I had not associated it with the battery percentage before. If I have noticed it quite warm in normal use. I hope it improves with some new firmware.

 

[Paul - iBasso]

Firmware support coming very soon for AMP9.

 

[yannis]

Hi all.
I`m using Lurker`s firmware v2.11.293.

How to enter Pure Mango OS? Pressing power button gives me option to shutdown and reboot only.
Where I can find SuperSU app?

Thanks!

 

[jon parker]

Hi all.
I`m using Lurker`s firmware v2.11.293.

How to enter Pure Mango OS? Pressing power button gives me option to shutdown and reboot only.
Where I can find SuperSU app?

Thanks!

I can enter Pure Mango OS on mine - Same FW but mine says - V2.11.293-L0
Make sure you have actually flashed the right FW and it has actually worked!

 

[yannis]

I can enter Pure Mango OS on mine - Same FW but mine says - V2.11.293-L0
Make sure you have actually flashed the right FW and it has actually worked!

Yes, that`s the version I have - V2.11.293-L0
I have used DX150FirmwareV2.11.293-L0.zip file
No errors during update.

 

[jon parker]

Yes, that`s the version I have - V2.11.293-L0
I have used DX150FirmwareV2.11.293-L0.zip file
No errors during update.

Im pretty sure you need to unzip the file to get the .img file and then using the latest dx200 android tool fllash that .img file

 

[yannis]

Im pretty sure you need to unzip the file to get the .img file and then using the latest dx200 android tool fllash that .img file

I did all that
That`s way I have 2.11.293-L0 version installed.

Do I need to use DX150FirmwareV2.11.293-L0-fullflash.zip instead?

 

[jon parker]

I did all that
Do I need to use DX150FirmwareV2.11.293-L0-fullflash.zip instead?

Im tying to remember exactly what i did last time but Yes! I think it is the fullflash that you need - good luck

 

[yannis]

Im tying to remember exactly what i did last time but Yes! I think it is the fullflash that you need - good luck

Will try that
Thanks!

 

[yannis]

It looks I have messed up firmware and firmware addon

I was using DX150-OTA_1.03.036 firmware with DX150-A8.1-L1.17 addon.

Now I`m trying to flash DX150FirmwareV2.11.293-L0.

FactoryTool goes on loop with update. Screen is not going on.

Any ideas? Thanks!

 

[jon parker]

It looks I have messed up firmware and firmware addon

I was using DX150-OTA_1.03.036 firmware with DX150-A8.1-L1.17 addon.

Now I`m trying to flash DX150FirmwareV2.11.293-L0.

FactoryTool goes on loop with update. Screen is not going on.

Any ideas? Thanks!

Dont worry about it - Its always a royal pain in the arse whenever I try it as well - Sometimes you just need to try it one or two times
In-between through you can hold down the On button for 10+ seconds and this should reset the device & then try again

Also sometimes after a flash the screen can take a long time to come on - This is normal
please dont worry, just persevere and all will be well

Ps there is more info on this previously posted in this thread

 

[yannis]

Ps there is more info on this previously posted in this thread

Thanks for your support. It would be nice that info is on one place.
But this way is more interesting

DX150FirmwareV2.11.293-L0-fullflash did the trick