How do you bundle/pack your portable (pics welcome)
Apr 1, 2011 at 3:10 PM Thread Starter Post #1 of 13

Racer24

Head-Fier
Joined
Mar 24, 2010
Posts
75
Likes
10
The "pics of your portable rig" thread is great. I've gone through all of the pages (probably twice) but there aren't a lot of pictures of how people store their rig while on the go. What I want to know (or see) is are these two things:
 
1. How you attach/stack/velcro/etc. your gear together. I have and iPod and small amp I normally put in a pocket.
 
2. Are you using a fancy bag? Fanny-pack anyone?  
 
Apr 1, 2011 at 8:00 PM Post #3 of 13
 
 
hippo ampsack
 
 
 
 
 
 
Apr 1, 2011 at 8:03 PM Post #4 of 13
and velcro band lol
 
 
 
 
Apr 2, 2011 at 1:50 AM Post #6 of 13
I just use silcone bands for my Arrow + iPod combo (http://goodsforgiving.com/wristbands.html has a good selection since I didn't really like the ALO bands).

 
 
Apr 2, 2011 at 12:44 PM Post #7 of 13
Small velcro strips between my Fuze and T4 amp, then both into an old pleather camera case, with HF5 phones is a little pouch of their own.
 
 
 
Apr 2, 2011 at 1:46 PM Post #8 of 13
 Wow that's almost the exact setup I'll have (T4 + HF5). How to the HF5s sound out of the T4? (especially the low end)
 
Apr 2, 2011 at 2:42 PM Post #9 of 13
I use a touch, had an arrow, traded it for a Leckerton UHA-4.  I secure both to the touch with thin (1/32" or 1/16") plumbing o-rings of appropriate size.  They are thin, and can be rolled down to the bottom and up to the top of the screen, and still hold the amp to the touch, and leave the screen free for viewing and control.  Probably $1 worth of o-rings.  I am looking around for the right case to keep it all in.
 
Apr 5, 2011 at 12:12 AM Post #11 of 13
Velcro strips between my iRiver H120 and iBasso D10, then both put into the ThinkTankPhoto All The Other Stuffs pouch.
 
Apr 5, 2011 at 8:01 AM Post #12 of 13
I'm using a clip + and a fiio E7
 
found that the samsung wave S8500 leather case fits the E7 beautifully!!! just had to trim the top for the IC and cut two slits to hold the clip on, and one hole for the 3.5mm
 

 
Sorry about quality - phone camera is as good as it gets :/
 

 
Apr 11, 2011 at 7:56 PM Post #13 of 13
Doubled sided car foam tape + velcro = amazing combo since you can take out the foam tape without leaving residual if needed.
 

 

 

 
And the PX200ii bag that was trimmed and sewed again to make it a perfect fit with the PAV2V+Touch.
 

Users who are viewing this thread

Back
Top