[dhruvmeena96]

Holy cow.
So would use one 2mmID tube of 12mm length, insert a 1.2mm ID/2mm length tube at 6mm, put a 1.2mm ID/4mm length tube at the nozzle of the driver and then put the 2mmID tube over that.

So it's like this (with a "-" being 1mm length, 1.2mm ID, and a "=" being 1mm legnth, 2mm id):

[DRIVER]----==--======

you are right


i did a opsie above
edited the post
i am sorry


[DRIVER]----==--========

ask @Choy Wei De how to do it...he is master of making tube resonator in the fastest ways possible

 

[Choy Wei De]

Holy cow.
So would use one 2mmID tube of 12mm length, insert a 1.2mm ID/2mm length tube at 6mm, put a 1.2mm ID/4mm length tube at the nozzle of the driver and then put the 2mmID tube over that.

So it's like this (with a "-" being 1mm length, 1.2mm ID, and a "=" being 1mm legnth, 2mm id):

[DRIVER]----==--======

This is how i used 10mm 1.2mm and 7mm 2.0mm ID to make 11mm long total tube. Total overlap of 6mm.
But its all worth it.

 

[Choy Wei De]

you are right


i did a opsie above
edited the post
i am sorry


[DRIVER]----==--========

ask @Choy Wei De how to do it...he is master of making tube resonator in the fastest ways possible

@eunice

It look something like this except the further 2mm from spout will be much longer.

 

[Choy Wei De]

you are right


i did a opsie above
edited the post
i am sorry


[DRIVER]----==--========

ask @Choy Wei De how to do it...he is master of making tube resonator in the fastest ways possible

@dhruvmeena96 @eunice

It took me like 1 minute to do this without glue.

 

[eunice]

Thank you so much guys. I will try it.

 

[dhruvmeena96]

Thank you so much guys. I will try it.

well, it is just for added sound stage and reverb, just to add a pinch of musicality and color to sound. bass becomes more rumbly and region between 2kHz to 4kHz calms a down a little(very little). overtones are increased and the best part is that it doesn't mask the GQ(main driver), but sounds slightly delayed, adding this live like feeling

but imaging is compromised a little(just a little)

 

[eunice]

I just realised, the zobel acts for both drivers. Right? So the zobel and the two drivers in parallel, or did I mess up the diagram?

 

[dhruvmeena96]

I just realised, the zobel acts for both drivers. Right? So the zobel and the two drivers in parallel, or did I mess up the diagram?

Zobel is parallel to RAB and RAB only
And it has to be parallel to RAB only

Dont make it parallel to both

 

[eunice]

But then my diagram is wrong. How should I connect the GQ if not in parallel to the zobel and the RAB?

According to my diagram the + of the audio source is connected to the cap of the zobel, to the + of the RAB and + of the GQ.
The - of the audio source is connected to the resistor of the zobel, to the - of the RAB and the - of the GQ.

So all three in parallel.

If that’s not correct I have to fix the diagrams.

 

[IvanNOON]

Problem with zobel is that if there is nothing before it (like a resistor or a cap) - it defacto affects all drivers

 

[dhruvmeena96]

Problem with zobel is that if there is nothing before it (like a resistor or a cap) - it defacto affects all drivers

First connect GQ negative to negative supply

Then connect RAB negative to zobel, and Zobel negative to the power supply

 

[eunice]

First connect GQ negative to negative supply

Then connect RAB negative to zobel, and Zobel negative to the power supply

Did I specify that correctly in my diagrams ?

 

[dhruvmeena96]

Did I specify that correctly in my diagrams ?

Nopes...

But I think I made a paper diagram with mmcx once.

RAB negative goes to zobel, and from there, you take zobel + RAB negative pole and connect to GQ negative and then to connection port.

 

[eunice]

This the diagram ?

If you disregard any resistance/capacitance or inductivity of the wires (which I think we can do) then that is all 3 in parallel. Or isn’t it?

 

[dhruvmeena96]

This the diagram ?

If you disregard any resistance/capacitance or inductivity of the wires (which I think we can do) then that is all 3 in parallel. Or isn’t it?

Well, its better to try take measurements for what you are thinking because the above diagram you posted was sorta right, but I would have connected RAB negative to zobel and then passed it down.
Zobel is paralleled to driver before it goes into parallel with any other driver or is getting a crossover.

It is soldered on speaker terminal itself on some loudspeaker diy

Zobel has to correct RAB only