Jester0fTortuga
100+ Head-Fier
Nice, how low is too low?Install the driver and reduce the buffer size.
Nice, how low is too low?Install the driver and reduce the buffer size.
Disable safe mode and reduce it while it remains stable. I have enabled NOS, buffer 32 samples.Nice, how low is too low?
- 3.5mm output is 125mW, 4.4mm output is 320mW, so you will get more power out of the 4.4mmA newbie question on NOS mode. Under the Darwin option the NOS switch is by default on left side.
Does it mean the device is playing in default NOS mode or OS mode.
Sliding it to right as in screenshot means NOS mode is on, right?
And another observation on volume, I find the output very low in my regular iem when the sound volume level is 50. I have to increase the sound level to 65 to get the normal output in 3.5 mm non-balanced. Is it normal or I have to do some settings in volume somewhere
Sorry for asking so many questions.
What does "gain" means inside Play menu. How does it work? will sliding it to high impact the current and voltage output in case of 3.5mm connection or it is for 4.4mm balance ouput only. I don't have 4.4mm ended cable with me now so can't check its impact.
Thanks everyone for your help.
MODEL | HIBY RS2 |
---|---|
Operating system | HiByOS PureAudio version |
CPU | X1000E |
DAC | Darwin Architecture |
Audio format support | PCM384 / DSD256 |
USB | USB 2.0 |
Display size | 2.45” |
Touchscreen | Yes |
Resolution | 480*360 |
Storage – card slot 1 | Micro SD card up to 2TB |
Storage – card slot 2 | Micro SD card up to 2TB |
Chassis material | Aluminium alloy |
Dimensions | 90.3 *64.8*18.8 mm |
Weight | Approx. 158g |
Charging | 5V⎓1.5A |
Battery size | 3500mAh |
Charging time | Approx. 3h (0%-100%) |
OUTPUT PORT | 3.5MM PO @32Ω | 4.4MM PO @32Ω | 3.5MM LO @10K |
---|---|---|---|
Frequency response +/-1dB | 20Hz-20kHz | 20Hz-20kHz | 20Hz-20kHz |
Output voltage | 2Vrms | 3.2Vrms | 2Vrms |
Maximum output power | 125mW | 320mW | / |
Rated output power (THD <1%) | 125mW | 225mW | / |
Crosstalk rejection | 63dB | 82dB | 82dB |
SNR | 118dB | 117dB | 116dB |
Dynamic Range | 82 | 82 | / |
THD+Noise | 0.006% | 0.006% | 0.006% |
Output impedance | 0.47Ω | 0.94Ω | 10K |
Long term Burn in not really, but resistor ladders are designed to work optimally at a certain temperature range, so you may find that the sound "burns in" each session over the first 5-10 min or so as the device warms up.Hey guys, just wondering if RS2 requires burn-in. if yes, then how many hours should be enough to get the full potential of this little device.
Thanks.
Burn-in = no. But it needs 15min warm-up each time - resistors like to be warm.Hey guys, just wondering if RS2 requires burn-in. if yes, then how many hours should be enough to get the full potential of this little device.
Thanks.
all out Szalayi 4.4 Bal out:Can you guys share tracks that shine on the RS2? Anyone curate a playlist on Spotify/Tidal?
well, wish is granted, just need to wait patiently.using it with A&K PA10
hello @HiByMusic please provide Line Out function in 4.4 Bal, software Line Out is okay
When paired with pa100, how great is it?using it with A&K PA10
hello @HiByMusic please provide Line Out function in 4.4 Bal, software Line Out is okay