[sparko311]

yes, I believe the SS3602 would be OK in the Gustard.  Its just the singles (SS3601) that go in the head phone amplifier portion that wont work.  I believe its because my devices use 2 pole compensation (which is part of their magic) and the gustard head amp has its own pole in it - which makes a 3 pole (unstable) system. 

I think it would be great for someone to try the SS3602 in there for the dual OPAs (which i believe are part of the input stage)  If it doesnt work out - I do offer money back guarantee.

 

[canthearyou]

Like I posted earlier, I think the Sparko duals and Burson singles would make a great match.

 

[FritzS]

My experience about Burson Supreme Sound Opamp V5 - but i don't know about Sparkos SS3602 till now.
 
http://www.head-fi.org/t/432749/the-opamp-thread/5175#post_12529711
 
http://www.head-fi.org/t/432749/the-opamp-thread/5175#post_12632408

 

[gunnerwholelife]

My tube amp similar to BH Crack, just quit on me today.
I am looking for some replacement amp to drive my hd650's and dt880's.till the tube amp is fixed.
 
Looking at SS amps as of now.
 
Does this play well with hd650/dt880 ?

 

[Walderstorn]

  My tube amp similar to BH Crack, just quit on me today.
I am looking for some replacement amp to drive my hd650's and dt880's.till the tube amp is fixed.
 
Looking at SS amps as of now.
 
Does this play well with hd650/dt880 ?

 
It does with 600 so should be good with 650.

 

[FritzS]

GUSTARD H10 is new for me.
My questions, who is the manufacturer from the GUSTARD H10?
Gives there a homepage from?

 

[Walderstorn]

  GUSTARD H10 is new for me.
My questions, who is the manufacturer from the GUSTARD H10?
Gives there a homepage from?

 
You can ask pollychen about it.
I still dont think there is a homepage.
I can at least tell you that for the price its a no-brainer for my hd600. Im EU selling mine because i want a 3x as expensive piece of gear, otherwise i would keep it.

 

[olek]

  Does this play well with hd650/dt880 ?

 
Stock, it will amplify them fine - as long as you do not expect greatness. If your dt880 is 600 Ohm model, it will be OK with H10, just a bit dull.
 
If you only wanted to feed hd650, O2 would be not bad as interim solution, cheaper, smaller, and performs (with HD650!) on almost the same level.
But O2 totally runs out of breath with DT880/600, would not recommend that combination.

 

[sportteo]

how much( euros) the Burson  V5 Op-Amp for gustard h10 ? 4 pieces i guess (2+2)?

 

[eacmen]

I recently bought an H10 from another head-fi member that had lost the screws for the H10 enclosure. If anyone is curious I have measured the screws using calipers and a thread gauge. If anyone else needs to replace the screws for their H10 the following should be correct:
 
Socket Cap M3 x 0.5 x 12mm Machine Screw
 
Details:
Thread Length: 12mm
Thread Pitch: 0.5
Bolt Diameter: 3mm
Head Type: Socket Cap
Head Diameter: 5.5mm
Head Height: 3mm
Drive Type: Hex
Drive Size: 2.5mm
 
Minimum order quantity was 100 for these screws. So if anyone just wants to pay postage PM me and I can send you some of my spares once I get them.

 

[jazzwave]

  how much( euros) the Burson  V5 Op-Amp for gustard h10 ? 4 pieces i guess (2+2)?

 
Single
http://www.ebay.com/itm/V5-Single-SS-discrete-Opamp-x-2-beat-OPA627-AD811-AD844-OPA604-AD8610-AD797-LME-/111879962757?hash=item1a0c90c085:gzoAAOSwWnFWChi9
 
Dual
http://www.ebay.com/itm/V5-Dual-SS-discrete-Opamp-x-2-beat-OPA627-NE5534-LME49990-LME49710-OPA2604-/111969987041?hash=item1a11ee69e1:grIAAOSwuTxWChfL

 

[sportteo]

Thanks "Jazzwave' for the links

 

[lafeuill]

I recently bought an H10 from another head-fi member that had lost the screws for the H10 enclosure. If anyone is curious I have measured the screws using calipers and a thread gauge. If anyone else needs to replace the screws for their H10 the following should be correct:

Spoiler

 


Socket Cap M3 x 0.5 x 12mm Machine Screw


 


Details:


Thread Length: 12mm


Thread Pitch: 0.5


Bolt Diameter: 3mm


Head Type: Socket Cap


Head Diameter: 5.5mm


Head Height: 3mm


Drive Type: Hex


Drive Size: 2.5mm


 

Minimum order quantity was 100 for these screws. So if anyone just wants to pay postage PM me and I can send you some of my spares once I get them.

 


Noted, thanks for the kind offer ^^

 

[zilch0md]

Scruffy1 has posted some very positive comments on the Burson V5i, in the Opamp thread:
 
http://www.head-fi.org/t/432749/the-opamp-thread/5175#post_12642543

 

[happyguitarist]

Has anyone done a detailed sound comparison of V5i vs V5 (either single or dual)?