jsiets4
New Head-Fier
Well the next thing I would do is to reseat the transceiver modules and the optical cablesYeah, that I did! But my knowledge on the issue is very minimal so it’s good that you started with the basics!
Well the next thing I would do is to reseat the transceiver modules and the optical cablesYeah, that I did! But my knowledge on the issue is very minimal so it’s good that you started with the basics!
I see on the upper FMC the latch is not seatedYeah, that I did! But my knowledge on the issue is very minimal so it’s good that you started with the basics!
Only noticed the top one, I need new glasses
When inserting SFP modules...
- Open latches
- Insert SFP firmly
- Close latches
- Insert Cable
Ahh, I see... I now tried to follow your instructions and think the SFP's are properly seated (latches are now closed) but still got the same results. Router can't find my R26 with the FMC mod. Should it work if I set it up on the fly or do I need to shut down my router, set up the FMC and then power up the Topping P50 and then the router or should it matter?
When inserting SFP modules...
- Open latches
- Insert SFP firmly
- Close latches
- Insert Cable
All lights are not blinking. They light up still like before (see pic). I wonder why the upper FMC box lights up at 100M and the lower one at 1000M? And yeah, I’ve been using the streamer of my R26 without any issues, and it’s still working normally when I take away the FMC mod.All lights are blinking?
Try turning off and on the P50 power supply.
Does the Streamer of R26 worked before the FMC mod?
I’d put the original multimode back in and see what happens, after shutting everything down. The upper box isn’t getting a signal, I assume that’s on the receive side?All lights are not blinking. They light up still like before (see pic). I wonder why the upper FMC box lights up at 100M and the lower one at 1000M? And yeah, I’ve been using the streamer of my R26 without any issues, and it’s still working normally when I take away the FMC mod.
But I see you have two fiber cables connected to each FMC box? Should I do the same?
Oh man, I think I’ve somehow accidentally ordered the FMCs with wrong SFP modules (see pic).Nope, I upgraded my SFPs to Finisars which are multimodes NOT singlemode at the beginning.
The Fiber part have no lights...the Ethernet part has. Meaning its on the FMC/SFP which has the problem. After ensuring the SFPs are seated and locked, maybe you should change cables.
Thanks for the reply yet again but still no luck I’m afraid… (sigh)Sorry I haven't seen in detail what you have...You lack another cable since you have multimode (instead of singlemode) modules like mine rightnow. See my last pic/post...
See your SFP has another socket empty...So connect BOTH cables.