GUSTARD DAC-R26 Balanced Decoder R2R+1Bit Dual Native Decoding Music Bridge

Dec 5, 2022 at 12:20 PM Post #2,296 of 9,881
Are here more people with stuttering problems during HighRes playback when connected with USB?
 
Dec 5, 2022 at 12:25 PM Post #2,297 of 9,881
Santa came early. The lhy ock2 and custom pure silver clock cable arrived today. Going to connect the clock to the r26 and do a test between LAN +clock and usb to u18 to r26 + clock.
 

Attachments

  • 20221205_160710.jpg
    20221205_160710.jpg
    1.7 MB · Views: 0
Dec 5, 2022 at 1:38 PM Post #2,299 of 9,881
I have just added the Leo Bodnar GPS precision clock to the R26 and for the cost this takes the DAC up another level
http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=107&products_id=234

The R26 is now punching harder mids are even more open with improvements across the range. For the amount off money it costs I would recommend giving something like this a try.

That slight warmth I would occasionally hear is now gone. Now a lot closer to a Rockna Wavelight
 
Dec 5, 2022 at 2:13 PM Post #2,303 of 9,881
I have just added the Leo Bodnar GPS precision clock to the R26 and for the cost this takes the DAC up another level
http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=107&products_id=234

The R26 is now punching harder mids are even more open with improvements across the range. For the amount off money it costs I would recommend giving something like this a try.

That slight warmth I would occasionally hear is now gone. Now a lot closer to a Rockna Wavelight
Measured phase noise of GPS clock at 10MHz output is equal or better than:
-70 dBc/Hz at 1 Hz offset from the carrier


I’m afraid this is rather mediocre performance for a reference 10Mhz master clock.
 
Dec 5, 2022 at 2:17 PM Post #2,305 of 9,881
Measured phase noise of GPS clock at 10MHz output is equal or better than:
-70 dBc/Hz at 1 Hz offset from the carrier


I’m afraid this is rather mediocre performance for a reference 10Mhz master clock.
How'd the OCK-1 measure?
 
Dec 5, 2022 at 2:37 PM Post #2,308 of 9,881
So my Fiber Optic media converter arrived today consisting of:
10Gtek Gigabit Fiber Media Converter w/ Pair of Bidi SFP Singlemode Simplex LC Module (Kit #5)
10Gtek OS2 LC to LC Duplex Fiber Patch Cable 0.5m
TOPPING P50 LPS
USB Type A Male to 90 Degree Barrel Connector Charging Cable 5.5 x 2.5mm DC 5V 80cm
Veetop Ethernet LAN Cat 8 RJ45 Cable 0.25

Initial Impressions: Uplift in resolution, separation, blacker background, a bit more analog(?) to my system.
Verdict: For 220Eur total, yes a keeper.

Pics or did not happen:

SeMbNHr.jpg
4wweFSZ.jpg
 
Last edited:
Dec 5, 2022 at 2:40 PM Post #2,309 of 9,881
So my Fiber Optic media converter arrived today consisting of:
10Gtek Gigabit Fiber Media Converter w/ Pair of Bidi SFP Singlemode Simplex LC Module (Kit #5)
10Gtek OS2 LC to LC Duplex Fiber Patch Cable 0.5m
TOPPING P50 LPS
USB Type A Male to 90 Degree Barrel Connector Charging Cable 5.5 x 2.5mm DC 5V 80cm
Veetop Ethernet LAN Cat 8 RJ45 Cable 0.25

Initial Impressions: Uplift in resolution, separation, blacker background to my system.
Verdict: For 220Eur total, yes a keeper.

Pics or did not happen:

SeMbNHr.jpg
4wweFSZ.jpg
Love the plastic wrap :) Sounds like you’re hearing what the rest of us have, this is a real winner in tweakville.
 
Dec 5, 2022 at 2:55 PM Post #2,310 of 9,881
The media converter came wrapped in plastic. I just cut some holes to test it outright. Maybe will leave it for protection.
 

Users who are viewing this thread

  • Back
    Top