He was contactable on Monday…
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Forza AudioWorks Impressions Thread
- Thread starter ossomac
- Start date
…and here’s the latest cable:
Hybrid Series for R70x. A good match, and very lightweight (in mass, not in sound!).
Hybrid Series for R70x. A good match, and very lightweight (in mass, not in sound!).
jonathan c
Headphoneus Supremus
I am a new Forza Audio Works customer. Two of the Noir Hybrid HPC with Furutech 4-pin XLR amp termination have been ordered: one for Clear / Gjallarhorn JM Edition, the other for Auteur / LCD-X. Fired up! The Noir Hybrids will be used with Flux Lab FA-22 and with Rogue RH-5….the hybrid metallurgy will be just the ticket!…
Chris Kaoss
Headphoneus Supremus
Welcome and enjoy once they've arrived.
Matez
Sponsor: Forza Audio Works
- Joined
- Nov 3, 2005
- Posts
- 1,220
- Likes
- 776
I belive that you should be sorted b nowHowever last time I heard from you Was thursday
I'm off work now during weekend, but am operational daily. If I haven't replied yet, I will ASAP via mail.Is it possible that Matt has a week of vacation?
Thanks!The microphonics from the stock cable are gone and it works well for what I bought it for.
And since Monday I will be available via mail yet againHe was contactable on Monday…
Awesome! Can I borrow this on my FB wall please? WBA is a Polish manufacturer, right?…and here’s the latest cable:
Hybrid Series for R70x. A good match, and very lightweight (in mass, not in sound!).
Thanks! High compliance with many differently tuned cans is one of its most important traits I think.the hybrid metallurgy will be just the ticket!…
Stay updated on Forza AudioWorks at their sponsor profile on Head-Fi.
|
Of course!I belive that you should be sorted b now
I'm off work now during weekend, but am operational daily. If I haven't replied yet, I will ASAP via mail.
Thanks!
And since Monday I will be available via mail yet again
Awesome! Can I borrow this on my FB wall please? WBA is a Polish manufacturer, right?
Thanks! High compliance with many differently tuned cans is one of its most important traits I think.
And yes, WBA are based in Kluczbork.
I got to use Matt's Noir Hybrid HPC for the first time today as my ZMF VC's came in. Very impressive. The clarity is extraordinary.
Matez
Sponsor: Forza Audio Works
- Joined
- Nov 3, 2005
- Posts
- 1,220
- Likes
- 776
Thank you!I got to use Matt's Noir Hybrid HPC for the first time today as my ZMF VC's came in. Very impressive. The clarity is extraordinary.
And thank YOU!Of course!
And yes, WBA are based in Kluczbork.
Stay updated on Forza AudioWorks at their sponsor profile on Head-Fi.
|
fourdogslong
New Head-Fier
Just got a new set of HD800S and these come with 4.4mm nowadays. My amp uses XLR 4 pin.
So I'm hesitant between cutting the 4.4mm cable and putting an XLR 4 pin instead, I'm handy with soldering so that's not an issue, or buy an aftermarket cable like the Forza noir or claire hybrid.
I like the sound already so I don't want to change that, I'm not looking for a smoother top end or more low end, in that case what would you recommend?
So I'm hesitant between cutting the 4.4mm cable and putting an XLR 4 pin instead, I'm handy with soldering so that's not an issue, or buy an aftermarket cable like the Forza noir or claire hybrid.
I like the sound already so I don't want to change that, I'm not looking for a smoother top end or more low end, in that case what would you recommend?
Chris Kaoss
Headphoneus Supremus
Cut it, if you don't need a 4.4 connector.
JaquesGelee
100+ Head-Fier
You could also buy an adapter 4.4 female to 4 Pin XLR Male. But sooner or later you should definetly try a cable from FAW!Just got a new set of HD800S and these come with 4.4mm nowadays. My amp uses XLR 4 pin.
So I'm hesitant between cutting the 4.4mm cable and putting an XLR 4 pin instead, I'm handy with soldering so that's not an issue, or buy an aftermarket cable like the Forza noir or claire hybrid.
I like the sound already so I don't want to change that, I'm not looking for a smoother top end or more low end, in that case what would you recommend?
Last edited:
ThanatosVI
Headphoneus Supremus
Does anyone have Noire interconnects?
They are not on the website but available via mail inquiry.
If you have some please post some pictures
They are not on the website but available via mail inquiry.
If you have some please post some pictures
ThanatosVI
Headphoneus Supremus
All sorted now, looking forward to the cablesI belive that you should be sorted b now
I'm off work now during weekend, but am operational daily. If I haven't replied yet, I will ASAP via mail.
JaquesGelee
100+ Head-Fier
Noire interconnects? You can choose the brand you wan't or need. Mostly Neutrik, Furutech or even "third party ones", from FAW quality/ usage approved. *If you don't ask for or choose a special brand.Does anyone have Noire interconnects?
They are not on the website but available via mail inquiry.
If you have some please post some pictures
Headphonespecific ones like HiRose, LEMO, 2 Pin Sennheiser from selected manufacturers.
If you scroll through the gallery here, you can have a look for some examples.
Or what do you mean exactly?
Cheers
Last edited:
ThanatosVI
Headphoneus Supremus
I was talking about cables to connect your DAC to your amp - interconnects (you probably understood connectors)Noire interconnects? You can choose the brand you wan't or need. Mostly Neutrik, Furutech or even "third party ones", from FAW quality/ usage approved. *If you don't ask for or choose a special brand.
Headphonespecific ones like HiRose, LEMO, 2 Pin Sennheiser from selected manufacturers.
If you scroll through the gallery here, you can have a look for some examples.
Or what do you mean exactly?
Cheers
Here are Claire Interconnects
https://forzaaudioworks.com/en/product.php?id_product=48
However not listed on the website, but still available are Noire interconnects.
And I asked if someone has them and can share some pictures.
Users who are viewing this thread
Total: 4 (members: 0, guests: 4)