[peter1480]

x7 with aptx to stennys m2 and fiio remote

 

[peter1480]

 

[harpo1]

  h aptx to stennys m2 and fiio remote

Thanks.  Weird that mine doesn't show this.
 
What firmware are you on?

 

[peter1480]

fw 3.0.4
 
check out
 
http://www.head-fi.org/t/822983/official-x7-beta-firmware-android-5-1-download-and-discussion-thread-fw3-0-4-beta

 

[harpo1]

  fw 3.0.4
 
check out
 
http://www.head-fi.org/t/822983/official-x7-beta-firmware-android-5-1-download-and-discussion-thread-fw3-0-4-beta

I upgrade to that firmware via OTA.  I'll have another bluetooth device that supports aptx on Wednesday so I'll test it again then and see what happens.

 

[peter1480]

ps how r u getting on with the sandisk 200GB I have one at the moment working fine?

 

[harpo1]

  ps how r u getting on with the sandisk 200GB I have one at the moment working fine?

It won't do a media scan so I can't use it right now.  Works fine on FW2.0 and in my X3ii.

 

[peter1480]

  It won't do a media scan so I can't use it right now.  Works fine on FW2.0 and in my X3ii.

Intresting, I'm loading a Samsung T3 SSD 1tb, I'm using it to back up my NAS but I figure it will be intresting 2 try it plugged into the X7.

 

[Paulo Abreu]

ps how r u getting on with the sandisk 200GB I have one at the moment working fine?

I also would like to have a definitive answer on this, asked a couple of times but not much feedback. This is the main reason why I didn't upgrade yet to 3.0.4

 

[Mooflotic]

Weeeeeee!! Time to pick a pair of Momentum wireless...

 

[Reboot]

 Hi, guys!
 
 I just purchased FIIO K5 Docking and I use a protective cover for my Fiio x7, so the device does not fit in the top dock.
 
 Where those 11 Pin micro usb cable available to purchase to use 'Dock In' port at the back of the K5? Or they already available from Fiio or other reputed brand?
 
 Any problem to use a USB to micro usb adapter like this? 

 
 
 
 I searched several sites a micro USB cable 11pin male / male, but not found anywhere.
 
 Thanks a lot!

 

[Paulo Abreu]

   Hi, guys!
 
 I just purchased FIIO K5 Docking and I use a protective cover for my Fiio x7, so the device does not fit in the top dock.
 
 Where those 11 Pin micro usb cable available to purchase to use 'Dock In' port at the back of the K5? Or they already available from Fiio or other reputed brand?
 
 Any problem to use a USB to micro usb adapter like this? 

 
 
 
 I searched several sites a micro USB cable 11pin male / male, but not found anywhere.
 
 Thanks a lot!

Hi,
 
Can´t you get a simple micro usb extension (male to female) and connect it in the main dock port where X7 attaches normally?

 

[russell finch]

I don't know if it would work for you, but this cable links my X5 (gen 1) to my OTG storage perfectly. May be worth a try
 
http://www.ebay.co.uk/itm/7cm-Right-Angle-to-Left-Angle-Micro-USB-Host-OTG-Cable-for-DAC-Digital-Amplifier-/262471088485?hash=item3d1c7ef965

 

[Reboot]

  Hi,
 
Can´t you get a simple micro usb extension (male to female) and connect it in the main dock port where X7 attaches normally?

 Thank you for the suggestion.
 I may have to use this way that you suggested. I prefer to use the connector on the back for a purely aesthetic issue, but maybe your suggestion is the easiest.

 

[Reboot]

  I don't know if it would work for you, but this cable links my X5 (gen 1) to my OTG storage perfectly. May be worth a try
 
http://www.ebay.co.uk/itm/7cm-Right-Angle-to-Left-Angle-Micro-USB-Host-OTG-Cable-for-DAC-Digital-Amplifier-/262471088485?hash=item3d1c7ef965

 I think this would work out perfectly for my situation.
 
 I will contact the Fiio and ask if this alternative could work. Unfortunately in my country I believe it will be difficult to find this cable, but I can import it by Ebay.
 
 Thanks a lot for the help!