[imeem]

How accurate is the battery % on the BTR 2021? I would charge it to 80-90%, turn it off and turn it on few hours later; the battery % will be 60.

Also, i noticed on my S10+ phone, different combinations of sample rate, bitdeph and LDAC codec quality affects the signal quality greatly.
for example, if I do 96 khz/32 bits @ 990/909 kbps the audio/connection signal always chops/drops. But if I change it to Adaptive Bit Rate @ the same khz/bit depth, its fine.

44.1 khz/32bits @ 990/909 kbps is also fine as well. Is this 2 issue normal?

 

[Lifter59]

How accurate is the battery % on the BTR 2021? I would charge it to 80-90%, turn it off and turn it on few hours later; the battery % will be 60.

Also, i noticed on my S10+ phone, different combinations of sample rate, bitdeph and LDAC codec quality affects the signal quality greatly.
for example, if I do 96 khz/32 bits @ 990/909 kbps the audio/connection signal always chops/drops. But if I change it to Adaptive Bit Rate @ the same khz/bit depth, its fine.

44.1 khz/32bits @ 990/909 kbps is also fine as well. Is this 2 issue normal?

I just plugged mine in to charge after 2 weeks in a drawer shut off. Shows 4/5 bars at the start of charging.

 

[imeem]

I just plugged mine in to charge after 2 weeks in a drawer shut off. Shows 4/5 bars at the start of charging.

is it more accurate to use the app to tell battery life or the device? on the app, it would say 100% charge and on the device itself would flash 4/5 bars. After i unplug it from charge, app will show 80% and device will show 4/5 bars.

 

[FiiO]

is it more accurate to use the app to tell battery life or the picture? on the app, it would say 100% charge and on the device itself would flash 4/5 bars. After i unplug it from charge, app will show 80% and device will show 4/5 bars.

The battery bar in the APP may not updated on time. You could enter the APP again before checking the battery.

Best regards

 

[KiLeAk]

Testing the BTR5 2021 XMOS firmware on my Samsung Galaxy Fold 3, seems to work well - 96k, 88.2k, 44.1k all displaying (and I assume playing!) correctly.

 

[Finger Fish]

Has anyone used something like the BTR5 on speakers (R1280T) using the AUX cable? I'm thinking of buying one to turn my pair wireless for when I need it. And wanna know if it works well and sounds fine.

 

[imeem]

Has anyone used something like the BTR5 on speakers (R1280T) using the AUX cable? I'm thinking of buying one to turn my pair wireless for when I need it. And wanna know if it works well and sounds fine.

i used them in car's aux port before. it works fine. If you are using it primarily for speakers, i feel like the BTA30 Pro would be better because you are not double amping; the BTA 30/ pro has a line out.

The battery bar in the APP may not updated on time. You could enter the APP again before checking the battery.

Best regards

will try that. on another note, I don't understand why holding volume up is for Previous Track, and holding volume down is Next track. It should be the other way around to keep it consistency. too bad the app you can't change this.

 

[imeem]

regarding the offical leather case, the SK-BTR5; can i use it the same time as the clip? is the leather case big enough to hold the clip?

 

[razvitm]

FIIO, if you're watching this, can you please add the possibillity of creating multiple custom EQs each with a different name, so we can easily switch from one headphone to another? Some of us are compensating headphone frequency responce with EQ, and this would be very helpful, to have an eq preset for each headphone we use with BTR5... Or just make 5 or 10 custom presets, not just one. Because if it's only one, we have to manually modify it every time we change headphones.

 

[senorx12562]

regarding the offical leather case, the SK-BTR5; can i use it the same time as the clip? is the leather case big enough to hold the clip?

No, if you look at them, it is not possible to use both at once.

 

[FiiO]

FIIO, if you're watching this, can you please add the possibillity of creating multiple custom EQs each with a different name, so we can easily switch from one headphone to another? Some of us are compensating headphone frequency responce with EQ, and this would be very helpful, to have an eq preset for each headphone we use with BTR5... Or just make 5 or 10 custom presets, not just one. Because if it's only one, we have to manually modify it every time we change headphones.

We have reported to the engineer about that before. And more custom EQ may not be added since it may bring some other problems for the BTR5.

Best regards

 

[ramdi]

I would like to buy a BTR5 2021, but which other problems does it has?

 

[Luke Skywalker]

I’m wondering how the sound will compare between the BTR5 2021 and 1) the HiBy FC5 and 2) the iFi xXSD i‘m currently using for my JH Lola IEMs and Audeze LCD-2 headphones

 

[FiiO]

I would like to buy a BTR5 2021, but which other problems does it has?

Dear friend,

Thanks for your interest in our product. You could try it in the local store first：https://www.fiio.com/wheretobuy
Or read some reviews by other users.

Best regards

 

[ramdi]

Yes. but which other problems you said does it has?