joseluishs
100+ Head-Fier
Of course! I really like the results and convenienceHoly crap, I have an Adi-2 Pro and a Wandla as well and this never occurred to me to try. Even a Mojo 2… I might really just copy your setup there![]()
![Headphone Smile :) :)](https://cdn.head-fi.org/e/headfi/smily_headphones1.gif)
Of course! I really like the results and convenienceHoly crap, I have an Adi-2 Pro and a Wandla as well and this never occurred to me to try. Even a Mojo 2… I might really just copy your setup there![]()
My setup is so compartmentalized… usb from the computer to the RME, next to that a raspberry pi and the Ferrum stack, and the Mojo connected to whatever device is closest. This will seriously bring things togetherOf course! I really like the results and convenienceThe audio is clean coming from the ADI and its usb connection with the computer has been reliable.
Holo Red is back in stock at Kitsune tooMy setup is so compartmentalized… usb from the computer to the RME, next to that a raspberry pi and the Ferrum stack, and the Mojo connected to whatever device is closest. This will seriously bring things together
The newer units with HW 4.0 seem to ship with it. Do you have the option to switch between Pro and Red Book under Audio -> DAC Out Standard? I think they added the ability to switch between those via HW in 4.0, so the Max Output voltage gets capped at either 4.0V or 9.75V without analog/digital attenuation.
Hmm I am a little confused now. My unit shipped with 1.3.0, which is newer then 1.2.2, which got release today?Yes I can confirm that on my v1.3 fw unit.
Btw new v1.2.2 available on the updater
![]()
Me too as it says board 4.0 needed too and I’m worried about future update possibilities.Hmm I am a little confused now. My unit shipped with 1.3.0, which is newer then 1.2.2, which got release today?
Do you also have issues with your Wandla freezing from time to time?
just checked, I am on hardware 3.0 and was on firmware 1.2.0, now 1.2.2
No, it says fw 1.2.2 is required for board 4.0 and up, not that board 4.0 would be required for fw 1.2.2Me too as it says board 4.0 needed too and I’m worried about future update possibilities.
It says that 4.0 needs this update. Not that you need 4.0 for this updateMe too as it says board 4.0 needed too and I’m worried about future update possibilities.
Do you also have issues with your Wandla freezing from time to time?
Ah! Misread it.It says that 4.0 needs this update. Not that you need 4.0 for this update
Oh holy crap, Wandla freezing does not mean it stops playing, it means full throttle?mine, yes! (hw 4.0/fw 1.3) glad I'm not using the OOR in Bypass mode!
It either stops playing or only gives a static noise on the left channel at full blast.Oh holy crap, Wandla freezing does not mean it stops playing, it means full throttle?