Feliks-Audio EUFORIA - A Wolf in "Sheep's" Clothing...
Aug 26, 2021 at 2:35 PM Post #9,616 of 11,472
Hi, I am in that heaven. I live exclusively with the Empyrean. I do say the stock cable should be silver. (Norne/ Lavricables or something) And still it is now quite common to say the Empyrean is not a technical masterpiece. It is considered comfortable. I have no idea if I would like the Hifiman HE1000SE more on the Euforia. It drives it well too I heard. But I would not give thousands of euros to crappy materials. I enjoy my music to the best of my cash/ ears abilities.
Curious, which amps are you comparing?

Just wanted to share my experiences with the Euphoria and sensitive low impedance planars.

WbKLzrc.jpg


When using the HE1000se paired with the Euphoria, bass is looser, and there’s less grip on the drivers when compared to the other 2 amps I’ve been using. There’s plenty of volume, and some of the tube magic gets through, but an amp with a lower output impedance gives far better results to my ears.
 
Aug 26, 2021 at 2:47 PM Post #9,617 of 11,472
Looks like your shelf is a little small for the two amps on top. I would like to offer a solution, move the DNA to the second shelf and send me the MC! Just missed buying one of these a short time ago, Did not see the ad in time. Shame, I really like it. Sooooo, if you need more room, keep me in mind if you decide to send it to me or sell it! Looks good.
 
Aug 27, 2021 at 6:38 PM Post #9,619 of 11,472
Aug 27, 2021 at 8:39 PM Post #9,620 of 11,472
I recently bought the non AE version, the retailer offered a discounted AE but honestly I just prefer the matte black, and more than I think I’d prefer the sound of the AE - especially given the price difference. Each to their own though, and maybe if I heard one I’d think differently!
 
Sep 2, 2021 at 8:14 AM Post #9,621 of 11,472
When I had both amps side by side for a month, I grew to like the new finish much better. Does not show the dust nearly as much, and looked better after wiping. Plus, after a month I actually liked the new one better. Most friends that saw the two amps together liked the new finish better as well. It is all about personal choice. Enjoy
 

Attachments

  • 11231949.jpg
    11231949.jpg
    2.1 MB · Views: 0
Sep 3, 2021 at 6:24 AM Post #9,622 of 11,472
does anyone have experience with 6N8S MELZ tubes for Euforia?
 
Sep 3, 2021 at 7:02 AM Post #9,623 of 11,472
If you refer to Melz metal base they are really nice tubes. Neutral sound with big soundstage. They are a little bit better than VT-231 tubes. If you have limited budget for tubes you should buy a pair of melz and skip expensive holy grail tubes 6sn7 tubes. It doesn't need to have 1578 stamp, it doesn't affect the sound at all. Also the internal construction doesn't affect the sound much also. In the picture I have 1578 stamped Melz tubes from 1982 and they sound pretty much the same like my 1954s Melz with different internal construction.
Don't buy cheap black base foton 6N8S tubes.
PXL_20210802_122527917.MP.jpg
 
Last edited:
Sep 3, 2021 at 8:33 AM Post #9,624 of 11,472
RENEXX interesting story. What dealer do you use, I have twice purchased tubes from russian suppliers, and three of the four tubes ended up dying within months. Have read a lot of reviews about russian tubes and my experience is typical. Noisy tube, open cathodes and shorted plates. And what was the price, as the prices I just looked at are above $150 per tube from suppliers I am familiar with
 
Sep 3, 2021 at 1:57 PM Post #9,625 of 11,472
Last edited:
Sep 3, 2021 at 4:23 PM Post #9,626 of 11,472
Sep 4, 2021 at 12:25 AM Post #9,627 of 11,472
I guess you mean the stock Svetlana 6as7g tubes ? I never really use the stock Tubes.

I like them with tungsol 6as7g and GEC 6080. Both are warm output tubes and pair very well when listening with my Zmf Aeolus.

They sound clearly superior than Kenrad VT-231 to me.
 
Sep 4, 2021 at 4:16 AM Post #9,628 of 11,472
RENEXX interesting story. What dealer do you use, I have twice purchased tubes from russian suppliers, and three of the four tubes ended up dying within months. Have read a lot of reviews about russian tubes and my experience is typical. Noisy tube, open cathodes and shorted plates. And what was the price, as the prices I just looked at are above $150 per tube from suppliers I am familiar with
There is a lot of discussion of Melz 6SN7 over on the 6SN7 thread, and a common recommendation is to re-solder the pins if they are noisy. I have a pair that a good man from that thread re-soldered and sent my way, and they are excellent tubes in Elise.
 
Sep 4, 2021 at 3:48 PM Post #9,629 of 11,472
There is a lot of discussion of Melz 6SN7 over on the 6SN7 thread, and a common recommendation is to re-solder the pins if they are noisy. I have a pair that a good man from that thread re-soldered and sent my way, and they are excellent tubes in Elise.
thanks for the tip, I did the reflow for my Melz 6SN7, and gave them another chance, the improvement is substantial, I dont want to swap them back to stock psvane's. With mullards 6080 first impression is very good
 

Users who are viewing this thread

Back
Top