crbc
New Head-Fier
I hate to have to ship it all the way back to iBasso China for service. I wonder if I open it with a #10Torx, I could somehow correct the adjustment to line up correctly?
YIKES!
DX320MAX Ti The musical event worth the wait. ROHM X 4. !! NEW Firmware: 2.03 !!
- Thread starter Paul - iBasso
- Start date
I hate to have to ship it all the way back to iBasso China for service. I wonder if I open it with a #10Torx, I could somehow correct the adjustment to line up correctly?
YIKES!
Send an email to Paul - paul@ibasso.com
mformoriarty
500+ Head-Fier
Yikes indeed, specially for something in that price range. Hope they get that fixed easily.My gain knob on my #394 is way off kilter! The four positions 1-4 click and operate fine, but the line indicator does NOT line up with the 4 numbers "1,2,3,4" on the faceplate. The knob is not loose at all. The photo on the left is Gain control at the Gain 1 position. The photo on the right is Gain control at the Gain 4 position.
I hate to have to ship it all the way back to iBasso China for service. I wonder if I open it with a #10Torx, I could somehow correct the adjustment to line up correctly?
YIKES!
Happened to me too. Something wrong with the gain switch. It’s working fine but won’t line up and changes position.
I hate to have to ship it all the way back to iBasso China for service. I wonder if I open it with a #10Torx, I could somehow correct the adjustment to line up correctly?
YIKES!
- Joined
- Oct 14, 2013
- Posts
- 29,278
- Likes
- 35,199
Someone pushed it in the wrong way. I would just grip it real tight, and pull it out, then push it back in. Usually they are held together by adhesive (knob-shaft)
jamato8
Headphoneus Supremus
Easy to fix. I looked at mine when I got it. The knob is brass with an insert and it is held to the inside face of the knob by double sided tape. If that slips or didn't make good contact initially with the knob insert, then it will move like yours. All you have to do is pull off the know, align the insert and then make sure it is pushed up well against the double sided tape that holds it to the inside face of the brass knob. No big deal. It is a D shaft, so it is just the insert in the knob that turned some.
I hate to have to ship it all the way back to iBasso China for service. I wonder if I open it with a #10Torx, I could somehow correct the adjustment to line up correctly?
YIKES!
Easy to fix.
Last edited:
I hate to have to ship it all the way back to iBasso China for service. I wonder if I open it with a #10Torx, I could somehow correct the adjustment to line up correctly?
YIKES!
Man that's messed up! Reach out to @Paul - iBasso via email, he is always helpful in a situation like this.
Dobrescu George
Reviewer: AudiophileHeaven
I got to the point where that happened to me too, not with normal usage, but because I grabbed and pushed it a bit too far.
Just push it a bit more on the opposite direction, and it somewhat falls into the right position, and then works as intended.
I don't think it is a terrible flaw, I pushed it quite hard to get that done, the volume wheel does not exhibit the same issue. You can make it fall right back into place, mine can go a bit more than it should if I give it too much force. I did use quite a bit of force because I thought it was the volume wheel, was not looking at it while working, and this happened as I was trying to push the volume a bit louder.
Just push it a bit more on the opposite direction, and it somewhat falls into the right position, and then works as intended.
I don't think it is a terrible flaw, I pushed it quite hard to get that done, the volume wheel does not exhibit the same issue. You can make it fall right back into place, mine can go a bit more than it should if I give it too much force. I did use quite a bit of force because I thought it was the volume wheel, was not looking at it while working, and this happened as I was trying to push the volume a bit louder.
I’m looking to buy a pair of IEMs under $1500.00 for the Max. Any ideas? Neutral with slightly elevated bass.
If you are using something that fits the bill, let us know.
If you are using something that fits the bill, let us know.
Trance_Gott
Headphoneus Supremus
Clearly U4s! Absolute amazing IEM in that price region.
What kind (if any) of sonic differences do you notice between 4.4mm and 3.5mm output?
just curious, why didn’t you jump on the 1000 stealth instead of OG?
It is the improved headphone, notably through its res and less grainy treble. Sublime with 320MAX too
I know the older version and have not heard the stealth. The V2 sounds very good with my desktop sys.
love this duo!
Users who are viewing this thread
