[Bosk]

Here are the AMP cards side by side. Still burning in the caps on the AMP1MK3, impressions so far are favorable.

 

[Bosk]

...didn't think I'd be able to leave it alone.

So I replaced the other electrolytics with the largest Silmic II's that would squeeze in. It all fits inside the DX240, just.

Listening to it now and will give it 48+ hours of burn-in before offering impressions of how it compares with the AMP3MOD.

 

[Skullar]

Can anyone compare dx240 to se200?

Sonically only. Is se200 an upgrade?

 

[ExpatinJapan]

iBasso DX240, amp3MOD, iBasso CB13 cable & Campfire Audio Solaris 2020 with Xelastec tips

My favorite combo so far with the iBasso amp3MOD.

It has a very natural sound, vocals just above the music, it is not as aggressive at either end as the other two previous amps but reaches far enough deep and high with the right earphone pairing.

 

[TheRH]

There is a new update out. Has anyone tried to download and install it? I have, and it says, "Failed to install update package!"

 

[jamato8]

There is a new update out. Has anyone tried to download and install it? I have, and it says, "Failed to install update package!"

You have to download it. Then unzip the download and the FW is there. Tried the 80% battery saver and it didn't work then rebooted and it works. Great feature.

 

[javahut]

Why would you wanna stop battery charging after 80%? Seems like using your player on a regular basis after only 80% battery charge would make battery performance & longevity worse, not better. No reason is given for why or when you might wanna use this.

 

[TheRH]

.

 

[jamato8]

Why would you wanna stop battery charging after 80%? Seems like using your player on a regular basis after only 80% battery charge would make battery performance & longevity worse, not better. No reason is given for why or when you might wanna use this.

It is common and saves the battery and it will still charge to 100% normally if desired. Batteries charged to 80% and discharged to 20% last much longer than full charge and discharge. My Mac computer does this as do some other battery operating items. It is the smart way to charge unless you need the full 100%.

 

[TheRH]

For those who are having trouble with the update, please follow this: Download update > unzip DX240FW-v1.03 > Double click folder > Copy Zip OTA > Paste OTA in SD or Internal Root > Settings > System > Updater > Three dots in upper right corner > Local Update > Click Zip

Follow this process, and you will be able to update to the current version for the DX240. RH

 

[Bosk]

Might have to put my DX240 on a diet, it gained .6 grams with the AMP1MK3 mod.

 

[yannis]

DX240, V1.03 Apr 20th, 2022

Improvements with this firmware:

1. Improve the Bluetooth volume control compatibility. (Android OS)
2. Rectified the bug that when using AMP8 MK2 AMP card and the player are under the USB DAC mode, and volume can't be adjusted. (Android OS)
3. Rectified the bug that album artwork would not show correctly sometimes with lock screen on. (Android OS)
4. Improved the sleep timer feature. (Android OS)
5. Added the "Battery Saver" feature. Now battery can stop charging when the battery percentage reaches 80% when this feature is turned on. (Android OS)
6. Added coaxial output to the USB DAC mode.
7. Rectified the bug that earphones with an inline mic can't be used with the AMP8 MK2.

https://ibasso.com/uploadfiles/download/DX240FW-v1.03.zip

Instructions For Firmware update:

1. Copy and paste the DX240_full_ota_1.03.310.zip to your SD card's root folder, or the DX240's internal memory.
2. Go to Android OS, press Settings-->System-->Updater-->local update, and tap the zip file.
3. The whole update will take about 10 minutes. Reboot the DX240 after update completed. You can also choose to do a factory reset at this time to clear any artifacts from the previous firmware.

 

[TheRH]

For those who are having trouble with the update, please follow this: Download update > unzip DX240FW-v1.03 > Double click folder > Copy Zip OTA > Paste OTA in SD or Internal Root > Settings > System > Updater > Three dots in upper right corner > Local Update > Click Zip

Follow this process, and you will be able to update to the current version for the DX240. RH

 

[Ichos]

For those who are having trouble with the update, please follow this: Download update > unzip DX240FW-v1.03 > Double click folder > Copy Zip OTA > Paste OTA in SD or Internal Root > Settings > System > Updater > Three dots in upper right corner > Local Update > Click Zip

Follow this process, and you will be able to update to the current version for the DX240. RH

Working.
Thank you and @yannis

 

[arch7tect]

UAPP 6.0.6.8
* Added HiRes support to the iBasso DX240 and Cayin N8ii.

finally!