[fokta]

Nobody can confirm this as Ibasso has not officially mentioned anything about this. He could neither confirm nor deny it....so it is as good as a guess ? But what if it was going to be more expensive ? That is a more appropriate question

valid point...
need to think the pro and cons again

 

[alfgun25]

Yes, but quite difficult to obtain, due to no stock in my country... DX150 is a lot...
I had tried DX201, make DX150 not desirable in my ear..

Love that AMP1... since it became uncertain, need to look for alternative....

If u live in Jakarta i know audio Shop which still have dx200 in their stock

 

[Whitigir]

Quick question. Are the DX200's that are being sold with either the AMP3 or AMP5 modules already fitted, being supplied to the dealers like that, or is it the dealers fitting these amp modules themselves?

More like a package deal, you get amp module on the side ?

 

[deniska80]

Guys, Can anybody show me picture of soldering nichicon 470 and 1uf MLCC together(2) in detail.
I changed 5 capacitors and applied tdk absorber and after that i got more detailed sound but with a lot of unwanted noices("pssss","tsss" etc) and it(sound) became too harsh.

 

[icefalkon]

Quick question. Are the DX200's that are being sold with either the AMP3 or AMP5 modules already fitted, being supplied to the dealers like that, or is it the dealers fitting these amp modules themselves?

It comes as a separate box with a screwdriver included.

 

[singleended5863]

Guys, Can anybody show me picture of soldering nichicon 470 and 1uf MLCC together(2) in detail.
I changed 5 capacitors and applied tdk absorber and after that i got more detailed sound but with a lot of unwanted noices("pssss","tsss" etc) and it(sound) became too harsh.

There are only 2 solder joints you can solder 470uF with MLCC paralleled but did you use 1uF or 0.47uf? I used 0.47uf Kemet (yellow) the sound was still harsh then switched to the TDK 1uF (blue) no more edgy sound after that.

 

[397324]

More like a package deal, you get amp module on the side ?

No. The amp5 was attached to the DX200.

 

[deniska80]

TDK 1uF

Ive bought TDK 1uF and I dont know how to solder them together. Serviceman who did mod for me doesnt know it too,,,
So it would be great to have a picture))

 

[singleended5863]

If you bought a brand new DX200 there is only amp1 attached to that. All other amp modules are sold separately in boxes.

 

[397324]

It comes as a separate box with a screwdriver included.

No, like I said in my post the AMP5 came already attached to the DX200. I know, I bought one. I just wanted to know if it was official or not.

 

[397324]

If you bought a brand new DX200 there is only amp1 attached to that. All other amp modules are sold separately in boxes.

Not any more.

https://www.advancedmp3players.co.u...tage_Swing_Balanced_Amplifier_Card.15299.html

They've sold out of the ones with the AMP5 attached like I bought.

 

[singleended5863]

Ive bought TDK 1uF and I dont know how to solder them together. Serviceman who did mod for me doesnt know it too,,,
So it would be great to have a picture))

Here you go

 

[deniska80]

Here you go

Thnaks a lot but I still don't understend(dont see) how to add TDK capacitor correctly((

 

[singleended5863]

Thnaks a lot but I still don't understend(dont see) how to add TDK capacitor correctly((

Let it burning in for awhile to see if the harsh goes away.

 

[Whitigir]

Thnaks a lot but I still don't understend(dont see) how to add TDK capacitor correctly((

Did you mean to ask the correct polarity +/- ?

If so, MLCC has no polarity, just put it on, make sure you don’t short them together by crossing the legs with other legs