Any recommendations for a decent DAP transport for the MOJO which has streaming support and a decent screen? Fiio M6 thusfar looks best? As important also that isn't much bigger than mojo
The alternative is I sell the mojo and buy a AK Kann Alpha if I judge SQ to be similar when I get to try it out? Big + for DAP is the longer battery life though as well as only having to charge one device ...
Any recommendations for a decent DAP transport for the MOJO which has streaming support and a decent screen? Fiio M6 thusfar looks best? As important also that isn't much bigger than mojo
The alternative is I sell the mojo and buy a AK Kann Alpha if I judge SQ to be similar when I get to try it out? Big + for DAP is the longer battery life though as well as only having to charge one device ...
I have been using the Mojo stacked with the Hiby R3 for the past 1,5 years and have been very happy.
It works perfectly for listening to the tracks on the micro SD card, user interface is really good IMO for such a small device.
Size is almost exactly the same as the Mojo, and it seems to be specifically designed to be stacked with the Mojo as HiBy is offering a USB-C to COAX cable that perfectly matches the Mojo. I do prefer the USB-C to micro-USB cables from FIIO or Shanling though, they sound better to me.
The Hiby R3 can be remote controlled through the HiBy App, which is very useful when connecting the stack to a stereo system.
I don't use the Wifi function of the R3 since the Mojo is too sensitive to RFI and crackles when the R3's Wifi is active.
So for listening to Tidal I connect the Mojo to a PC or the phone via Micro-USB cable. If you have an Android phone you can also use high quality BT streaming to the R3.
With iPhones the BT audio connection is compressed and SQ suffers.
I made a 3D printed frame to stack the Mojo with R3 and a box to take it with me anywhere.
No idea but glad to hear you're enjoying it again! BTW, can you characterize the differences in sound signature/quality between the Mojo & your previous setup (Asus sound card)?
Any recommendations for a decent DAP transport for the MOJO which has streaming support and a decent screen? Fiio M6 thusfar looks best? As important also that isn't much bigger than mojo
The alternative is I sell the mojo and buy a AK Kann Alpha if I judge SQ to be similar when I get to try it out? Big + for DAP is the longer battery life though as well as only having to charge one device ...
I am quite new to Mojo and has a problem with DSD128/256
My setting is as follows:-
Neutron app on IPad mini4 - > Apple CCK cable - > Nordost usb cable - > Chord Mojo
I find out that sometimes I experience intermittentcy during playback DSD128/DSD256. I tried other USB cable but it doesn't help much. The issue is the same.
However when I replace Mojo with my desktop dac/Amp. The issue is gone and DSD128/256 is played flawlessly.
Recently I stopped by at the audio shop I bought my mojo in order to test Poly+Mojo but the issue with DSD128/256 remains existing. Playing dsd128 and dsd256 have some stops/stutters.
Anyone has the similar issue like mine? Any advice?
I am quite new to Mojo and has a problem with DSD128/256
My setting is as follows:-
Neutron app on IPad mini4 - > Apple CCK cable - > Nordost usb cable - > Chord Mojo
I find out that sometimes I experience intermittentcy during playback DSD128/DSD256. I tried other USB cable but it doesn't help much. The issue is the same.
However when I replace Mojo with my desktop dac/Amp. The issue is gone and DSD128/256 is played flawlessly.
Recently I stopped by at the audio shop I bought my mojo in order to test Poly+Mojo but the issue with DSD128/256 remains existing. Playing dsd128 and dsd256 have some stops/stutters.
Anyone has the similar issue like mine? Any advice?
I have similar issue when I upsampled using Audirvana in mac pro to DSD256. It would cutoff sometimes. I thought my macbook was overloaded and hence I stopped upsampling to DSD256. Had no issue till DSD64. May be it was Mojo After all. Most of my desktop gear are NOS R2R and non plays DSD so I couldn't test of the issue was macbook or desktop rig.
Can sound quality degrade as the battery goes through its life cycle? I'm thinking in terms of voltage drop in older batteries affecting playback quality. I recently replaced my battery (not holding charge for more than 2.5 hours) and noticed a change in the playback quality for the better (same IEMs / volume / source music) since the replacement.
Certainly Mojo had some problems with 2G, but you are using 4G.
Adding a ferrite choke to the usb cable, can remove virtually all the RFI. Search this thread for links to ferrite chokes that worked for owners - they only cost a few euros.
Some additional notes:
- For a 1 meter cable, you may need to use more ferrites separated by at least 1.5-2cm.
- if you're still not satisfied, try shielding the Mojo too..
Can sound quality degrade as the battery goes through its life cycle? I'm thinking in terms of voltage drop in older batteries affecting playback quality. I recently replaced my battery (not holding charge for more than 2.5 hours) and noticed a change in the playback quality for the better (same IEMs / volume / source music) since the replacement.
playing high resolution files trough Android puts a lot of stress on the mobile ram and processor. CD quality will not cause glitches. dsd in dop puts still more stress. so better to stop all unnecessary apps on Android and use higher buffer setting. the problem may not be with mojo. I have used USB audio player pro to feed Hugo from redmi s1 and even dxd files played fine. also a blu Ray player like pioneer bdp 160 can be a very good source to Hugo and mojo in desktop setup. these days blu Ray player are able to play almost all av format through USB input of the blu Ray player and coaxial out can be fed to mojo or Hugo. I am using two audioquest jitterbug one each in USB inputs of blu Ray player and these have improved the sound further. another transport I use is fiiox3 2 gen which is also a very good option. IMHO sources like fiio x3/x5 or any other dap are better than a mobile through USB out.
Hi, appreciate this is a very old post. Wondering if you could still help me. I tried to connect my blu ray player with Chord Mojo using an optical cable. However the blu ray player is still producing sound through the HDMI connection. If I disconnect the HDMI connection from the blu ray player I can't see the blu ray options on the TV. Within the blu ray player settings there is no option to disable HDMI sound. Can you suggest a possible solution. Many thanks!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.