RE; USB cables, Connections, White noise blasts
It may be un-related, but it may help some folk regarding their USB connections, possible white noise blasts etc.
Background
A while ago, I got myself a 1TB USB stick made by Patriot, that is supposed to be super fast! claimed read/write of over 300MB a second!
I some times got speeds that fast, but sometimes it would revert to slower speeds of about 100+ MB/s read and less than 100MB/s write, which was annoying.
So I used a software to check the speed,
It would start at 250+ , but at some point it would drop to about 100+ and then settle at about 80MB/s !! It would also get hot - so I implemented a heatsink from copper plates on both sides and some thermal pads.

It helped with heat dissipation but ultimately the speeds were all over the place. I checked it on my Android phone (with a converter) and the results showed similar pattern.
As a last resort, I thought I clean the plugs and sockets. I have a can of DeoxIT F5 which is a super-duper contact cleaner. After properly applying it and waiting for a few minutes to fully clean the USB plugs and sockets, I tried again.
WOW!
to my surprise, the speeds jumped to over 300MB/s reading and writing! and stayed up there. I tried a 32GB test file and the write curve stayed flat (ish) above 300MB/s all the way!

Dirty USB contacts make a difference!
the unit/PC kept adjusting the speeds when there were package drops, since writing and reading to external drives has error correction applied to them.
I wonder if the same phenomena is interfering with USB connection to DACs and creating data package drops which results in white noise blasts.
It may be un-related, but it may help some folk regarding their USB connections, possible white noise blasts etc.
Background
A while ago, I got myself a 1TB USB stick made by Patriot, that is supposed to be super fast! claimed read/write of over 300MB a second!
I some times got speeds that fast, but sometimes it would revert to slower speeds of about 100+ MB/s read and less than 100MB/s write, which was annoying.
So I used a software to check the speed,
It would start at 250+ , but at some point it would drop to about 100+ and then settle at about 80MB/s !! It would also get hot - so I implemented a heatsink from copper plates on both sides and some thermal pads.

It helped with heat dissipation but ultimately the speeds were all over the place. I checked it on my Android phone (with a converter) and the results showed similar pattern.
As a last resort, I thought I clean the plugs and sockets. I have a can of DeoxIT F5 which is a super-duper contact cleaner. After properly applying it and waiting for a few minutes to fully clean the USB plugs and sockets, I tried again.
WOW!
to my surprise, the speeds jumped to over 300MB/s reading and writing! and stayed up there. I tried a 32GB test file and the write curve stayed flat (ish) above 300MB/s all the way!



Dirty USB contacts make a difference!
the unit/PC kept adjusting the speeds when there were package drops, since writing and reading to external drives has error correction applied to them.
I wonder if the same phenomena is interfering with USB connection to DACs and creating data package drops which results in white noise blasts.
Last edited: