Chord Mojo 2 EQ settings

[bkilit]

Sennheiser HD820

iPhone ProMax and Apple Music

Crossfeed testing ⬤, try and put the mids forward and maybe gain some free extra bass to boot.

EQ Settings @iPaintCode | ⬤ Bass 20 Hz +6 | ⬤ Bass 125 Hz shelf +3 | ⬤ Treble 3 kHz shelf +1 | ⬤ Treble 20 kHz |

Volume Settings: | ⬤ | ⬤ |


Main issue is getting a good seal, stock pads are not good enough for my big melon head.

Do you have any favourite settings for ie600?Thanks in advance.

 

[bkilit]

Chord User	Headphone	@20Hz	@125hz	@3kHz	@20khz
RobD	Beyerdynamic T1 v3	0	-2	0	0
RobD	Sennheiser HD565	+2	+2	0	0

When I got the Beyer T1, after ten seconds of listening, I was ready to return it due to overblown bass.
With some EQ applied from the Mojo 2, it does sound pretty good.

Do you have the one for ie600 as well?Thanks in advance?

 

[bkilit]

Thanks for starting this thread. I am currently using the Mojo 2 with a new pair of Audeze LCD-3 (2022). My Eq settings are as follows:
Red (20hz peak) +2db
yellow (125hz shelf) +5db
green (3khz shelf) +7db
turquoise (20khz peak) -8db cut

these settings definitely improve bass response with detailed warm mids and smooth but detailed and airy highs. Good balance across all frequencies.

Would love to hear from any other LCD-3 owners using the Mojo 2 and their settings or what headphone amp they are pairing it with

Do you have the one for ie600 as well?Thanks in advance?

 

[bkilit]

Thanks for starting this thread. I am currently using the Mojo 2 with a new pair of Audeze LCD-3 (2022). My Eq settings are as follows:
Red (20hz peak) +2db
yellow (125hz shelf) +5db
green (3khz shelf) +7db
turquoise (20khz peak) -8db cut

these settings definitely improve bass response with detailed warm mids and smooth but detailed and airy highs. Good balance across all frequencies.

Would love to hear from any other LCD-3 owners using the Mojo 2 and their settings or what headphone amp they are pairing

 

[RicciFlow]

Do you have the one for ie600 as well?Thanks in advance?

Sorry, only own a pair of AUDEZE LCD-3 headphones at the moment but will add any other headphones over time that I get to try.
I will advise however my EQ is based on the testing of others using their own EQ software to get the frequency response of the LCD-3 close to the Harmine target. I then adjusted the Mojo 2 as best and close as I could. Mojo 2 only has 4 bands of adjustment whilst others software had more like 6.

 

[almarti]

Any suggestion for DSP and Crossfeed for MrSpeakers Ether Flow (2017, not the 1.1 update)?
Thanks in advance

 

[almarti]

Any suggestion for DSP and Crossfeed for MrSpeakers Ether Flow (2017, not the 1.1 update)?
Thanks in advance

hi again, this is the EQ curve I want to get with Mojo 2 DSP. Could someone please with configuration is the one that get the best approach? Thanks in advance

 

[jsk ksj]

hi again, this is the EQ curve I want to get with Mojo 2 DSP. Could someone please with configuration is the one that get the best approach? Thanks in advance

Have a play with this dsp calculator for the mojo2, its excellent,

https://mega.nz/file/SzgG0JJQ#WHIJKWvgsmMXA9JRKiA1uf_Ggq0UfaUEoRsmoXnnK_Q

 

[Guy Fawkes]

hi again, this is the EQ curve I want to get with Mojo 2 DSP. Could someone please with configuration is the one that get the best approach? Thanks in advance

it is not possible to get that equalizer curve with the Mojo 2, the Mojo only has 4 filters with fixed frequency and Q:

Peak 20 hz Q 0.71 -/+ 9 db
Low Shelf 150 hz Q 0.71 -/+ 9 db
High Shelf 2.4 khz Q 0.71 -/+ 9 db
Peak 20 khz Q 0.71 -/+ 9 db

 

[568812]

Although I like the EQ included in the M2 I generally don't use it but instead use Roon's (very good) DSP feature. It allows pre-sets for different HP's, something missing in the Mojo2. It's just easier this way if I regularly swap.

 

[almarti]

it is not possible to get that equalizer curve with the Mojo 2, the Mojo only has 4 filters with fixed frequency and Q:

Peak 20 hz Q 0.71 -/+ 9 db
Low Shelf 150 hz Q 0.71 -/+ 9 db
High Shelf 2.4 khz Q 0.71 -/+ 9 db
Peak 20 khz Q 0.71 -/+ 9 db

Thanks, you confirm all my calculations were right and didn't reach to this curve target.
How do you explain que Q of 0.71 when in the manual says all behind or above the fixed frequency gets the total value of -/+ db assigned?

 

[Guy Fawkes]

Thanks, you confirm all my calculations were right and didn't reach to this curve target.
How do you explain que Q of 0.71 when in the manual says all behind or above the fixed frequency gets the total value of -/+ db assigned?

I did not understand your question

 

[almarti]

I did not understand your question

Firstly I may receive a more detailed explanation on what Q means and how it works, could please explain more about this? Thanks

 

[jsk ksj]

Firstly I may receive a more detailed explanation on what Q means and how it works, could please explain more about this? Thanks

Read this, it explains everything....

https://www.waves.com/eq-tips-boost...meter stands for,more gentle when used subtly.

 

[almarti]

Read this, it explains everything....

https://www.waves.com/eq-tips-boost-or-cut-the-frequencies#:~:text=The Q parameter stands for,more gentle when used subtly.

Excellent explanation than confirms my understanding that the 4 Mojo 2 filters are shelves filters, 2 low in bass y 2 high in trebles so with this kind of filters it is not possible to get the oramory EQ curve as said by other user.