icyulkn
New Head-Fier
- Joined
- Mar 12, 2017
- Posts
- 17
- Likes
- 0
Ha, I’d try the AC3 but I’m waiting on a 2020-2021 Vizio m55q8-h1 55“ tv. I have a AV receiver with a headphone jack that does dts-ma/truehd. Haven’t tried that before.
Ha, I’d try the AC3 but I’m waiting on a 2020-2021 Vizio m55q8-h1 55“ tv. I have a AV receiver with a headphone jack that does dts-ma/truehd. Haven’t tried that before.
So what the hell is it turning it into when I’m using mpc-be or jriver wasapi? Sounds damn good really.
Ha, I’d try the AC3 but I’m waiting on a 2020-2021 Vizio m55q8-h1 55“ tv. I have a AV receiver with a headphone jack that does dts-ma/truehd. Haven’t tried that before.
If it converts it to pcm 2.0 wouldn’t it be lossless now over optical since it’s now 2 channels only? I’m still a little confused about this mixing stuff.
Hey man, to boot it into line level mode, you need to unplug the power than turn it on while holding both column buttons. It’s because when you turn the unit off while the power plugged in, the unit doesn’t really shutdown, it’s more like a hibernation state. So if you turn it back on with power cable, it’s actually ‘wake up’, instead of boot up. This is not described in any documentation, I found out about this myself.My Mojo came today but it doesn't behave the way I expected. I've googled quite a bit and can't seem to find a similar situation.
If I plug it in to charge when it is off, there is no white charging light. It does feel slightly warm so I assume charging is occurring, but I gave it a few hours and it isn't able to start when no power is connected.
If I plug it in to both power and data, the white charging light does come on, and it works.
I cannot boot it into line out mode (holding both + and -) when turning it on.
I guess I can let it charge more overnight- but is something up with this unit? It seems like something isn't working here.
Hey man, to boot it into line level mode, you need to unplug the power than turn it on while holding both column buttons. It’s because when you turn the unit off while the power plugged in, the unit doesn’t really shutdown, it’s more like a hibernation state. So if you turn it back on with power cable, it’s actually ‘wake up’, instead of boot up. This is not described in any documentation, I found out about this myself.
The charging issue, I don’t really know what’s going on. The device should get charged while only connecting power to the right micro USB port. I will try different cables to rule out cable problems first. If cables are Ok, then I recommend to do an exchange.
My Mojo came today but it doesn't behave the way I expected. I've googled quite a bit and can't seem to find a similar situation.
If I plug it in to charge when it is off, there is no white charging light. It does feel slightly warm so I assume charging is occurring, but I gave it a few hours and it isn't able to start when no power is connected.
If I plug it in to both power and data, the white charging light does come on, and it works.
I cannot boot it into line out mode (holding both + and -) when turning it on.
I guess I can let it charge more overnight- but is something up with this unit? It seems like something isn't working here.
Without a doubt you have a faulty unit.
Mojo should charge showing white light under any circumstances unless the battery is full. After charging a few hours or for even a short while, it should power on.
There's only one thing to bear in mind. When you buy it new you need to charge for about ten hours to condition the battery. However the white light would be on for that.