Just purchased the TANSIO MIRAI TSMR-3 from Penon and I chose to do a custom color for the face plates. The blue one circled is for the left side and the red one is for the right with a clear shell for the rest of the shell kinda like the design below
Just purchased the TANSIO MIRAI TSMR-3 from Penon and I chose to do a custom color for the face plates. The blue one circled is for the left side and the red one is for the right with a clear shell for the rest of the shell kinda like the design below
And it holds securely? I would imagine that earpieces would fall off easily.
Sounds awesome that I would be able to use 1 BT20 for KZs and BQEYZs that caught my interest. Don’t want to end up with 3 version of BT20 in my pockets
I sure will from what I've read very well could have been just as hyped as the DM6 if the DM6 wasn't put into the spotlight first. I'm super excited to get them how long did it take for yours to come?
And it holds securely? I would imagine that earpieces would fall off easily.
Sounds awesome that I would be able to use 1 BT20 for KZs and BQEYZs that caught my interest. Don’t want to end up with 3 version of BT20 in my pockets
As tight as normal manufacturing tolerances allow.
By that I mean between all of my 0.75mm cables, most fit just right. But there are a few that fit insanely tight and a few that fit ridiculously loose.
The story is the same with 0.78mm stuff.
I used to think 0.78mm vs 0.75mm made a big deal. However, the more IEMs and cables I collected, the more I realized it really doesn’t matter. Whether it’s a bit loose, a bit tight, or perfectly fine seems to all boil down to normal variations in manufacturing tolerances.
The only IEM I have that truly falls off is a QKZ VK1. It’s so loose, no cable fits without it falling right off (both sides). Even the stock cable that came with it. To get a cable to work I had to splay the pins outwards a tiny bit. And that trick works with any 2-pin IEM. That’s why I say it’s no big deal, and I don’t sweat over it anymore.
The other option (when you have a super loose cable) is to tin the cable pins with solder. It adds jusy the right amount of thickness, making even the loosest cables fit tightly.
I sure will from what I've read very well could have been just as hyped as the DM6 if the DM6 wasn't put into the spotlight first. I'm super excited to get them how long did it take for yours to come?
I got the default template version from Penon which was in stock. Came in a week. Your custom order will take time as it is built on order. What ETA did Penon give you?
I got the default template version from Penon which was in stock. Came in a week. Your custom order will take time as it is built on order. What ETA did Penon give you?
It didn't give me a ETA but that's probably due to it being a custom order I'm guessing about a month. I'm not really worried about it taking forever penon has great service and they were very accommodating when I was trying to decide what color I wanted they even sent me some real life pictures of the red color I wanted.
While it's too early to give listening impressions, here are measurements of the Tenhz T5, taken using a Dayton iMM-6 microphone using a vinyl tubing coupler. Measurements are calibrated but uncompensated, using 1/12th smoothing.
While it's too early to give listening impressions, here are measurements of the Tenhz T5, taken using a Dayton iMM-6 microphone using a vinyl tubing coupler. Measurements are calibrated but uncompensated, using 1/12th smoothing.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.