You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Chinese / Asian Brand IEM Info Thread
- Thread starter Brooko
- Start date
DBaldock9
Headphoneus Supremus
Faultless sound. Speaker-like, almost. Definitely an amazing DD. Bass is just right.
I would call this the OnePlus of IEMs.
The Moondrop Kanas Pro, folks.
I came that close to ordering the Moondrop Kanas Pro, during the 11.11 Sale.
I was also eyeing the ToneKing BL1 Planar Driver earphones.
Didn't end up ordering either, but I did get a Balanced cable from Luna Shops.
TechnoidFR
500+ Head-Fier
@Slater
Surely. I just replace them and it's ok
For the moment they are very stable. No disconnection. With zsn it's a good combo. I think they have a little down peak in high mids
Surely. I just replace them and it's ok
For the moment they are very stable. No disconnection. With zsn it's a good combo. I think they have a little down peak in high mids
TechnoidFR
500+ Head-Fier
This just showed up.
Can't test it til later though.
Also got the EP10 surprise. Heh. It is bassy. Sounds kind of like the BA10 to me but way more comfortable.
I want to know your first impression
TRN BT20 --
No instructions in the box!
The charging cable splits off into two microusb heads for charging each side at the same time. Pretty nice. Wish it would have some sort of dock though.
Pairing - turn both on and they automatically paired to each other. One side will remain in pairing mode and that'll pair with your device. Device is "TRN"
Looks like AAC is available for higher quality BT. No AptX or LDAC though. I am using AAC streaming from my phone.
I have the 2-pin version hooked up to my Unique Melody ME1 CIEMs and it works fine. Fits great. No floppiness, and doesnt feel like its there. Lightweight enough. Bare in mind, the ME1 is a heavy IEM and it doesnt feel like any additional weight. I'll have to try it later with a really light IEM like the P4 Pro with the mmcx version I have, or the KZ ZSN.
Sound quality, works fine. Not as good as LDAC which is what I've been used to lately for BT but its not bad at all. I rate AAC just barely behind AptX HD and above AptX but not on par with LDAC.
Range is quite good for bluetooth! I put the phone in bedroom in one corner of my tri-level house and walked downstairs to the home theater room corner and still had clean signal. Walked outside and lost a little bit though. Still better than any BT device I've had so far.
Ok that's it for now. This was my 15 minute test.
No instructions in the box!
The charging cable splits off into two microusb heads for charging each side at the same time. Pretty nice. Wish it would have some sort of dock though.
Pairing - turn both on and they automatically paired to each other. One side will remain in pairing mode and that'll pair with your device. Device is "TRN"
Looks like AAC is available for higher quality BT. No AptX or LDAC though. I am using AAC streaming from my phone.
I have the 2-pin version hooked up to my Unique Melody ME1 CIEMs and it works fine. Fits great. No floppiness, and doesnt feel like its there. Lightweight enough. Bare in mind, the ME1 is a heavy IEM and it doesnt feel like any additional weight. I'll have to try it later with a really light IEM like the P4 Pro with the mmcx version I have, or the KZ ZSN.
Sound quality, works fine. Not as good as LDAC which is what I've been used to lately for BT but its not bad at all. I rate AAC just barely behind AptX HD and above AptX but not on par with LDAC.
Range is quite good for bluetooth! I put the phone in bedroom in one corner of my tri-level house and walked downstairs to the home theater room corner and still had clean signal. Walked outside and lost a little bit though. Still better than any BT device I've had so far.
Ok that's it for now. This was my 15 minute test.
Last edited:
ScottPilgrim
100+ Head-Fier
[
Definitely full of depth but soundstage isnt anything amazing. The secret sauce is the dynamics and channel matching.Speaker like? Lots of depth? My kind of sound.
Slater
Headphoneus Supremus
TRN BT20 --
No instructions in the box!
The charging cable splits off into two microusb heads for charging each side at the same time. Pretty nice. Wish it would have some sort of dock though.
Pairing - turn both on and they automatically paired to each other. One side will remain in pairing mode and that'll pair with your device. Device is "TRN"
Looks like AAC is available for higher quality BT. No AptX or LDAC though. I am using AAC streaming from my phone.
I have the 2-pin version hooked up to my Unique Melody ME1 CIEMs and it works fine. Fits great. No floppiness, and doesnt feel like its there. Lightweight enough. Bare in mind, the ME1 is a heavy IEM and it doesnt feel like any additional weight. I'll have to try it later with a really light IEM like the P4 Pro with the mmcx version I have, or the KZ ZSN.
Sound quality, works fine. Not as good as LDAC which is what I've been used to lately for BT but its not bad at all. I rate AAC just barely behind AptX HD and above AptX but not on par with LDAC.
Range is quite good for bluetooth! I put the phone in bedroom in one corner of my tri-level house and walked downstairs to the home theater room corner and still had clean signal. Walked outside and lost a little bit though. Still better than any BT device I've had so far.
Ok that's it for now. This was my 15 minute test.
Maybe someone handy with a 3D printer and the right skills, can make a dock and share the file!
BTW, your observations about AAC vs aptX are spot on.
For anyone that’s interested in learning more, this link is quite informative:
https://www.reddit.com/r/headphones/comments/7db9tq/about_aacsbc_codecs_over_bluetooth_on_iphone_x/
Slater
Headphoneus Supremus
This just showed up.
Can't test it til later though.
Also got the EP10 surprise. Heh. It is bassy. Sounds kind of like the BA10 to me but way more comfortable.
I just checked the tracking on my BT20 bought 11.11. It hasn’t even left China yet! It just posted today.
I am bummed. I thought I would have it in my hands this week
The anticipation is makin’ me late and keepin’ me waiting
Last edited:
I just checked the tracking on my BT20 bought 11.11. It hasn’t even left China yet! It just posted today.
I am bummed. I thought I would have it in my hands this week
The anticipation is makin’ me late and keepin’ me waiting
Dang. I ordered from NiceHCK store.
I was moving things around in the house today and doing a lot of downsizing of our living room and cleaning out the garage while using the TRN BT20 and UM ME1. This is a game-changer for me. Seriously! If they can come out a new version with LDAC support, I'll be an extremely happy person. This thing works great. It's been on for 5.5 hours straight on AAC. My android phone says there's 50% battery left.
Tried with KZ ZSN. Feels great!
Tried with KZ ZSN. Feels great!
Last edited:
Thread is working fine from this end .The discovery thread was locked...
Anyway @Dsnuts , can you explain a little more about the coiled strands on the cables on the it01s? Because i also see the coiled strands on the dmg's cable. You can see it clearer if you shine a light on it.
EDIT: I assume this https://www.head-fi.org/threads/the-discovery-thread-new-bgvp-dmg-initial-impressions-pg2507.586909/
Last edited:
Thread is working fine from this end .
EDIT: I assume this https://www.head-fi.org/threads/the-discovery-thread-new-bgvp-dmg-initial-impressions-pg2507.586909/
It was locked temporarily by mods to clean it up I believe.
How is the hiss?I was moving things around in the house today and doing a lot of downsizing of our living room and cleaning out the garage while using the TRN BT20 and UM ME1. This is a game-changer for me. Seriously! If they can come out a new version with LDAC support, I'll be an extremely happy person. This thing works great. It's been on for 5.5 hours straight on AAC. My android phone says there's 50% battery left.
Tried with KZ ZSN. Feels great!
ShakyJake
100+ Head-Fier
PSA:
I’m seeing some reports on Aliexpress that some of the new KZ 8-core dual-color cables are wired out of phase.
So as usual, always check your cables and IEMs for phase issues as soon as you receive them.
Maybe I need one of the out of phase cables to go with my out of phase KZ ZSN? In this case, two wrongs do make a right! I wonder if some of the Ali Express sellers will offer this as an option: In-phase or out-of-phase
Users who are viewing this thread
Total: 10 (members: 0, guests: 10)