[olivierhacking]

I have the BQEYZ BQ3 and really like them, but my eartips keep slipping off because there is no lip holding them back.
Already tried hot glue, any tips otherwise?

 

[zepmaj]

I have the BQEYZ BQ3 and really like them, but my eartips keep slipping off because there is no lip holding them back.
Already tried hot glue, any tips otherwise?

Try some sewing thread around nozzle for better grip.

 

[dharmasteve]

is there a source for cheap cases for IEM's ?
i am getting hit with increasing shipping fees on ali when i buy more than 3-5 cases - I want 20 or so for all my IEM's

Go on to amazon and type in 'watch display boxes'. You can get them super cheap.....a 12 IEM/watch display box is about $15-$20 and come in plastic or wood.

 

[RikudouGoku]

is there a source for cheap cases for IEM's ?
i am getting hit with increasing shipping fees on ali when i buy more than 3-5 cases - I want 20 or so for all my IEM's

Maybe one of these:
https://www.amazon.co.uk/DURHAND-Drawers-Organiser-Storage-Cabinet/dp/B07JM5Y8XT
https://www.amazon.co.uk/VonHaus-Drawer-Storage-Cabinet-Organiser/dp/B01M7QUL2Z

I have the vonhaus box and can confirm it fits with both iem + cable no problem.

 

[ehjie]

I have the BQEYZ BQ3 and really like them, but my eartips keep slipping off because there is no lip holding them back.
Already tried hot glue, any tips otherwise?

Try rolling up a strip of scotch tape. leave overnight. The idea is to transfer gum residue onto the nozzles.
That should give enough tackiness for your tip stems...

 

[olivierhacking]

Try rolling up a strip of scotch tape. leave overnight. The idea is to transfer gum residue onto the nozzles.
That should give enough tackiness for your tip stems...

Sweet, will give this a shot! And otherwise the sewing thread tip mentioned above

 

[ehjie]

Go on to amazon and type in 'watch display boxes'. You can get them super cheap.....a 12 IEM/watch display box is about $15-$20 and come in plastic or wood.

i like this better, elegant, functional & most important - NOT expensive...
Jewellery & watch organiser cum IEM DAP organiser

 

[ehjie]

Sweet, will give this a shot! And otherwise the sewing thread tip mentioned above

better apply both, im quite sure it would challenging to tie & close a knot...

 

[DynamicEars]

Sweet, will give this a shot! And otherwise the sewing thread tip mentioned above

Or just wrap the nozzle with micropore tape

 

[RikudouGoku]

Spoiler: Fiio FH3

Cable measured at 0.49 ohm. I am changing the cable to the Faaeal litz copper cable, the MMCX connection on the shells are VERY hard to detach so I wouldnt recommend changing the cable much. I was so afraid of breaking something while detaching the stock cable (that is pre-attached).

Fits me like a glove, really good fit but I get a little driver flex on both sides though.

Some very very early first impressions are: Bass is pretty high in quantity, but is clean. Mids on both male/female vocals are pretty high in quantity as well as the treble. Not sharp on Evanescence - bring me to life so shouldnt be sharp on my other songs, but havent tried a lot of songs yet so of course I cant say for sure it wont be sharp at all.

First impressions are very good, in basically all aspects, from sound to accessories.

 

[Slater]

Not sharp on Evanescence - bring me to life so shouldnt be sharp on my other songs, but havent tried a lot of songs yet so of course I cant say for sure it wont be sharp at all.

That’s one of my test tracks for harshness too!

I would love to meet whoever mixed/mastered that track and have a little talk with them.

 

[RikudouGoku]

That’s one of my test tracks for harshness too!

I would love to meet whoever mixed/mastered that track and have a little talk with them.

lol, yeah it is very good at testing that. (I have others I use to test it too but I am most familiar with bring me to life from all the old anime music videos I used to watch with it in it )

 

[DynamicEars]

Spoiler: Fiio FH3

Cable measured at 0.49 ohm. I am changing the cable to the Faaeal litz copper cable, the MMCX connection on the shells are VERY hard to detach so I wouldnt recommend changing the cable much. I was so afraid of breaking something while detaching the stock cable (that is pre-attached).

Fits me like a glove, really good fit but I get a little driver flex on both sides though.

Some very very early first impressions are: Bass is pretty high in quantity, but is clean. Mids on both male/female vocals are pretty high in quantity as well as the treble. Not sharp on Evanescence - bring me to life so shouldnt be sharp on my other songs, but havent tried a lot of songs yet so of course I cant say for sure it wont be sharp at all.

First impressions are very good, in basically all aspects, from sound to accessories.

Very very beautiful ripple shell! Love them.
Waiting for more impressions. So they are mid forwards? How aboit upper mids? Usually fiio like to do triple boost on 2khz, 6khz and 8khz.
Im sensitive with 3khz over +10db from 1khz and secondly 5-6khz can be shouty too if higher than 2 and 8 khz. I guess you have same sensitivity on those area from a lot of your reviews.

 

[RikudouGoku]

Very very beautiful ripple shell! Love them.
Waiting for more impressions. So they are mid forwards? How aboit upper mids? Usually fiio like to do triple boost on 2khz, 6khz and 8khz.
Im sensitive with 3khz over +10db from 1khz and secondly 5-6khz can be shouty too if higher than 2 and 8 khz. I guess you have same sensitivity on those area from a lot of your reviews.

I would say they are L-shaped. Bass is higher than both mid and treble while mid/treble are pretty equal.

Upper mids and lower treble isnt a problem at all for me, and I am very sensitive to that range (2-4k is my big weakness).

I am not very sensitive to the 8k area though, but I dont hear any peaks there (for referrence, the Shozy form 1.1 has a peak at 8k that isnt bothering me at all, but I can hear that it helps it from being overly warm).

From what I hear the treble is pretty even without any apparent peaks for me. But I havent compared it to anything yet, so take it with a grain of salt.

 

[kamifipy]

Spoiler: Fiio FH3

Cable measured at 0.49 ohm. I am changing the cable to the Faaeal litz copper cable, the MMCX connection on the shells are VERY hard to detach so I wouldnt recommend changing the cable much. I was so afraid of breaking something while detaching the stock cable (that is pre-attached).

Fits me like a glove, really good fit but I get a little driver flex on both sides though.

Some very very early first impressions are: Bass is pretty high in quantity, but is clean. Mids on both male/female vocals are pretty high in quantity as well as the treble. Not sharp on Evanescence - bring me to life so shouldnt be sharp on my other songs, but havent tried a lot of songs yet so of course I cant say for sure it wont be sharp at all.

First impressions are very good, in basically all aspects, from sound to accessories.

had you tied audiosense aq3 before ?

is fh 3 those bass heavier with neutral tone ?