Quote:
Originally Posted by sgrossklass
Enabling high sample rate merely was a kludge to get audio to the alt out. What one should do is enable the digital out in "PCM only" mode and check the option for automatic sample rate selection. This may require a 4.xx driver, reportedly people haven't been able to get output from their AV-710 alt out with the 5.00 (which might mean the Wolfson DAC isn't initialized correctly).
|
Tonns of info on this one, so I'll try to be short
-Wonderfull card, but tricky to use. Only one (unamped) high-quality output ("rear 6/7")
-D/L 4.53 VIA drivers from VIAarena, ignore the CD with the card. If you're not using the lates XP (i.e. W2000, 98 SP1 whatever), avoid ver.5 drivers
-Get Kernel Streaming plugin (FB, Winamp...)
-Set FB/Winamp to non-resampled KS
-Set your card to "2.0 channels". Digital out PCM, automatic sample rate
-plug your amp/cans in 6/7 and speakers in 1/2 (or just in 6/7 to have HQ sound on both)
-Enjoy sound from both
If smth's not clear, go ahead and ask
P.S. Ignore the jumpers, you can't get amped output on 6/7 (there are no amps), and DAC maxes at 10mA, so there's no way to listen with low-ohm cans unamped