oporto
Head-Fier
- Joined
- Jul 15, 2010
- Posts
- 60
- Likes
- 11
Hi,
Ages ago I started this thread http://www.head-fi.org/t/569141/help-building-m3#post_7722052 asking for help/advice to start building my M^3.
It took me a while, but all the bits and pieces have arrive from all over the world and its time to put everything together.
Here some pictures!
As you can see I started with the Sigma11 first, I will start with the M^3 today tho : )
Let me know if the images die or if there is a better place to upload them
UPDATE 26/11/2011
Just a few pictures, couldnt do much, busy day at work...
But please let me know what you thing : ) THANKS!
Sorry for the bad image quality : /
By the way, I havent cut the legs completely because if I have to resolder any of the components it will be as easy as new to resolder, its a pain to resolder a component with the legs completely cut off.
Hi, I just want to confirm where and which wires connect to the green sockets. I have a 25VA double 12V. What I have figure out so far is that I have to connect RED and ORANGE to the middles ones and black to the first one (left) and white to the last (right). is this correct? or it doesnt really matter what way they go? (black and white/ red and orange) and on the input cables, brown is LIVE and blue is NEUTRAL right? violet and white are ground?
As you can see im not an expert, and I cant always get help from my mate who is helping me. all its left is the this, the wiring and grounding and the resistors for the LEDs which I need to go buy.
Any kind of help/recommendation will be appreciated. THANK YOU!
By the way, this is the Sigma11 that will power the M^3
Ages ago I started this thread http://www.head-fi.org/t/569141/help-building-m3#post_7722052 asking for help/advice to start building my M^3.
It took me a while, but all the bits and pieces have arrive from all over the world and its time to put everything together.
Here some pictures!
As you can see I started with the Sigma11 first, I will start with the M^3 today tho : )
Let me know if the images die or if there is a better place to upload them
UPDATE 26/11/2011
Just a few pictures, couldnt do much, busy day at work...
But please let me know what you thing : ) THANKS!
Sorry for the bad image quality : /
By the way, I havent cut the legs completely because if I have to resolder any of the components it will be as easy as new to resolder, its a pain to resolder a component with the legs completely cut off.
Hi, I just want to confirm where and which wires connect to the green sockets. I have a 25VA double 12V. What I have figure out so far is that I have to connect RED and ORANGE to the middles ones and black to the first one (left) and white to the last (right). is this correct? or it doesnt really matter what way they go? (black and white/ red and orange) and on the input cables, brown is LIVE and blue is NEUTRAL right? violet and white are ground?
As you can see im not an expert, and I cant always get help from my mate who is helping me. all its left is the this, the wiring and grounding and the resistors for the LEDs which I need to go buy.
Any kind of help/recommendation will be appreciated. THANK YOU!
By the way, this is the Sigma11 that will power the M^3