Brise Audio (Official) News

Sep 2, 2024 at 11:42 PM Post #16 of 154
It’s been a while. This is NAOKI. I’m glad to see you’re doing well.
The photos of us are from a very long time ago; we look so young! (laughs) Time has really flown by, hasn’t it?
I’d love for you to listen to FUGAKU. Have you stopped coming to Japan? I look forward to seeing you again someday.
岡田さん、お久しぶりです!! Long time no see! Yes that was 7 years ago.

I would love to hear the FUGAKU! But unfortunately I have not been back Japan since leaving 5 years ago. If there's ever a FUGAKU tour in Australia (I'm in Western Australia though), it would be great to have a listen!
 
Last edited:
Sep 3, 2024 at 12:41 AM Post #17 of 154
Notice of additional OTG cables and partial discontinuation of USB products

1725338462673.png


https://briseaudio.com/en/blogs/news/20240903

We sincerely appreciate your continued support and patronage.

Today, we would like to inform you about the addition of OTG cables and the discontinuation of some of our previous USB products (three products in total).
*Please note that for all products, the 17 cm version will now only be available with an OTG cable.



1.【ACCURATE-USB】
 https://briseaudio.com/pages/accurate-usb


Discontinued Product:

ACCURATE-USB TYPE-C to C 17cm [Model Number: ACCUSB-CC017] JAN: 4570113631072
New Additions:

ACCURATE-USB OTG TYPE-C to C 17cm [Model Number: ACCUSBOTG-CC017] JAN: 4570113632901
ACCURATE-USB OTG TYPE-C to C 50cm [Model Number: ACCUSBOTG-CC050] JAN: 4570113632918
ACCURATE-USB OTG TYPE-C to C 1.5m [Model Number: ACCUSBOTG-CC150] JAN: 4570113632925


2.【YATONO USB-V2】
 https://briseaudio.com/pages/yatono-usb-v2

Discontinued Product:

YATONO USB-V2 TYPE-C to C 17cm [Model Number: YTNUSBV2-CC017] JAN: 4570113632505
New Additions:

YATONO USB-V2 OTG TYPE-C to C 17cm [Model Number: YTNUSBV2OTG-CC017] JAN: 4570113632932
YATONO USB-V2 OTG TYPE-C to C 50cm [Model Number: YTNUSBV2OTG-CC050] JAN: 4570113632949
YATONO USB-V2 OTG TYPE-C to C 1.5m [Model Number: YTNUSBV2OTG-CC150] JAN: 4570113632956



3.【MURAKUMO2-USB】
 https://briseaudio.com/pages/murakumo2-usb

Discontinued Product:

MURAKUMO2-USB TYPE-C to C 17cm [Model Number: MUR2USB-CC017] JAN: 4570113632215
New Additions:

MURAKUMO2-USB OTG TYPE-C to C 17cm
[Model Number: MUR2USBOTG-CC017] JAN: 4570113632963
MURAKUMO2-USB OTG TYPE-C to C 50cm
[Model Number: MUR2USBOTG-CC050] JAN: 4570113632970
MURAKUMO2-USB OTG TYPE-C to C 1.5m
[Model Number: MUR2USBOTG-CC150] JAN: 4570113632987
 
Brise Audio Stay updated on Brise Audio at their sponsor profile on Head-Fi.
 
https://briseaudio.com/
Sep 3, 2024 at 3:30 AM Post #18 of 154
Thank you for your interest.
I also saw your offer via the contact form.
However, at the moment we are unable to afford units for rent at our distributors or events and cannot afford to rent them out except to our suppliers.
Wishing you the very best in all your endeavors as well!
Thank you for your kind response. Yes, we are very much interested in your items. Let me know if any opportunity arises for us. Also, we can continue through Private Messages or e-mails.
 
Sep 3, 2024 at 1:53 PM Post #19 of 154
We would love to have a listening session in Vietnam if the opportunity arises.
I love the wonderful food and the amazing scenery in Vietnam.
Yep. See you.
 

Attachments

  • 20240831_182551.JPG
    20240831_182551.JPG
    2.3 MB · Views: 0
Sep 3, 2024 at 8:42 PM Post #20 of 154
Last edited:
Brise Audio Stay updated on Brise Audio at their sponsor profile on Head-Fi.
 
https://briseaudio.com/
Sep 9, 2024 at 10:06 PM Post #22 of 154
Regarding trial listening

If you wish to borrow a product or have a listening session, please make a request through a handling agent or through a store.

A list of dealers can be found on the following page.

https://briseaudio.com/en/pages/store-locator

In countries where there is no distributor, please request a listening session via a store with a physical store.

We do not lend directly to individuals.
 
Last edited:
Brise Audio Stay updated on Brise Audio at their sponsor profile on Head-Fi.
 
https://briseaudio.com/
Sep 10, 2024 at 1:01 AM Post #23 of 154
Hello everyone.

Brise Audio's official account has been launched on Head-Fi.

We will be posting Brise Audio news regularly in this thread.

Brise Audio is a Japanese cable manufacturer.

We also develop portable amplifiers and special earphone systems.

https://briseaudio.com/index.html

--

Please use the inquiry form for any content that requires a reply.

https://briseaudio.com/en/pages/contact-and-support
Congratulations on making your way to Head fi!

Can I check on the Fugaku: from the DAP, is it more optimal to use it as LO into the energizer unit or as headphone out? Thanks!
 
Sep 10, 2024 at 3:27 AM Post #24 of 154
Congratulations on making your way to Head fi!

Can I check on the Fugaku: from the DAP, is it more optimal to use it as LO into the energizer unit or as headphone out? Thanks!
Thank you for your question.

Basically, it is recommended to connect with LINE-OUT for sound quality.

If the gain or output voltage can be set on the player side, “Low gain” or 1V to 2V is recommended.

For FUGAKU amplifiers, the input level at which the volume position can be adjusted at a higher position is most desirable in terms of sound quality.

However, this does not mean that sound quality is poor even when the volume position is low.
 
Last edited:
Brise Audio Stay updated on Brise Audio at their sponsor profile on Head-Fi.
 
https://briseaudio.com/
Sep 10, 2024 at 4:12 AM Post #25 of 154
Thank you for your question.

Basically, it is recommended to connect with LINE-OUT for sound quality.

If the gain or output voltage can be set on the player side, “Low gain” or 1V to 2V is recommended.

For FUGAKU amplifiers, the input level at which the volume position can be adjusted at a higher position is most desirable in terms of sound quality.

However, this does not mean that sound quality is poor even when the volume position is low.
Thank you for the information.

What about Sony DAPs which don't have line-out?
 
Sep 10, 2024 at 4:54 AM Post #26 of 154
Thank you for the information.

What about Sony DAPs which don't have line-out?
SONY Walkman does not have a line out, but it can be used if a GND connection can be made.

We have developed and sold a 4.4mm (Signal) + 3.5mm (GND) to 4.4mm IC cable.

https://briseaudio.com/en/collections/mini-others-cable/products/shirogane-mini-ultimate

1725958392994.png


This option is also available for IC cables other than SHIROGANE-MINI.


A detailed explanation of the GND connection between the player and amplifier can be found in the Q&A of our TSURANAGI portable amplifier.

https://briseaudio.com/en/pages/tsuranagi-q-a

In terms of sound quality, it just depends on your preference.
 
Brise Audio Stay updated on Brise Audio at their sponsor profile on Head-Fi.
 
https://briseaudio.com/
Sep 10, 2024 at 4:58 AM Post #27 of 154
SONY Walkman does not have a line out, but it can be used if a GND connection can be made.

We have developed and sold a 4.4mm (Signal) + 3.5mm (GND) to 4.4mm IC cable.

https://briseaudio.com/en/collections/mini-others-cable/products/shirogane-mini-ultimate

1725958392994.png

This option is also available for IC cables other than SHIROGANE-MINI.


A detailed explanation of the GND connection between the player and amplifier can be found in the Q&A of our TSURANAGI portable amplifier.

https://briseaudio.com/en/pages/tsuranagi-q-a

In terms of sound quality, it just depends on your preference.
Thanks. I have a modded Sony WM1A with GND connection, so it will work with a standard balanced I cable.
 
Sep 10, 2024 at 7:03 AM Post #28 of 154
Thank you for your question.

Basically, it is recommended to connect with LINE-OUT for sound quality.

If the gain or output voltage can be set on the player side, “Low gain” or 1V to 2V is recommended.

For FUGAKU amplifiers, the input level at which the volume position can be adjusted at a higher position is most desirable in terms of sound quality.

However, this does not mean that sound quality is poor even when the volume position is low.
Hi, what output voltage from the DAP do you recommend for Tsuranagi-SC or Tsuranagi v2?
 
Sep 10, 2024 at 7:51 AM Post #29 of 154
Thank you for your question.

Basically, it is recommended to connect with LINE-OUT for sound quality.

If the gain or output voltage can be set on the player side, “Low gain” or 1V to 2V is recommended.

For FUGAKU amplifiers, the input level at which the volume position can be adjusted at a higher position is most desirable in terms of sound quality.

However, this does not mean that sound quality is poor even when the volume position is low.
Thank you for your guidance!
 
Sep 10, 2024 at 7:54 AM Post #30 of 154

Users who are viewing this thread

Back
Top