You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
AUDIOSENSE in-ear monitors Impressions Thread
- Thread starter FastAndClean
- Start date
RikudouGoku
Member of the Trade: RikuBuds
Actually, that graph looks similar to my graph on the DT200 (not so much to their own DT200 graph).
If the store graph is legit, it looks a bit similar in tuning to the predecessor DT200.
The DT200 had really good tonality and timbre, but was bottlenecked at subbass decay/movement of air (unvented BA bass) and also bottlenecked at technicalities.
I do hope the DT300 can keep or improve the tuning, but add better technicalities to the mix.
But looks like the bass-shelf isnt as linear with a bit less mid-bass but a bit more sub-bass.
Actually, that graph looks similar to my graph on the DT200 (not so much to their own DT200 graph).
But looks like the bass-shelf isnt as linear with a bit less mid-bass but a bit more sub-bass.
Haha rule number one in this hobby is to never trust store graphs!
Anyways bass quantity on graphs for BA unvented drivers is a big can of worms. It may not sound the same as a traditional DD bass in terms of subbass extension, movement of air and decay.
RikudouGoku
Member of the Trade: RikuBuds
Yeah, their own graph for the DT200 looks different from mine.Haha rule number one in this hobby is to never trust store graphs!
Anyways bass quantity on graphs for BA unvented drivers is a big can of worms. It may not sound the same as a traditional DD bass in terms of subbass extension, movement of air and decay.
But if they have the same tuning but with a lot better tech...
webberjosh75
New Head-Fier
Just found a latest review of DT600 in a Japanese website, here's the link with google translate:
https://www-audio--sound--premium-c...r_tl=en&_x_tr_hl=en-GB&_x_tr_pto=ajax,se,elem
quite a thorough review i must say.
https://www-audio--sound--premium-c...r_tl=en&_x_tr_hl=en-GB&_x_tr_pto=ajax,se,elem
quite a thorough review i must say.
RikudouGoku
Member of the Trade: RikuBuds
Just found a latest review of DT600 in a Japanese website, here's the link with google translate:
https://www-audio--sound--premium-c...r_tl=en&_x_tr_hl=en-GB&_x_tr_pto=ajax,se,elem
quite a thorough review i must say.
Hope thats not true....
They mentioned driving it with 85ohm, thats definitely not an amp with 85ohms of OI. Probably an impedance adapter.
(guess this is a beta unit and not final, since they said it will be released after the DT300.)
Hope thats not true....
They mentioned driving it with 85ohm, thats definitely not an amp with 85ohms of OI. Probably an impedance adapter.
(guess this is a beta unit and not final, since they said it will be released after the DT300.)
The Audiosense AQ7 had some Russian early adopter reviews too. Those reviews described it as V shaped.
After Audiosense took some feedback from the Russians, they released a totally retuned AQ7 that was more neutralish.
Strange that the sound "detiorates" when playing with a DAP with low output impedance. These multi driver low resistance/high sensitivity IEMs usually benefit from lower OI in the source isn't it. Too high OI can skew the frequency response.
The part about the IO might be a translation issue plus this is a very early version so best to wait on impressions from a actual retail version.The Audiosense AQ7 had some Russian early adopter reviews too. Those reviews described it as V shaped.
After Audiosense took some feedback from the Russians, they released a totally retuned AQ7 that was more neutralish.
Strange that the sound "detiorates" when playing with a DAP with low output impedance. These multi driver low resistance/high sensitivity IEMs usually benefit from lower OI in the source isn't it. Too high OI can skew the frequency response.
RikudouGoku
Member of the Trade: RikuBuds
It might be tuned for a higher impedance output, similar to the Tansio Mirai TSMR 4 pro. Where having a lower resistance sounds worse. (tonality differences.)The Audiosense AQ7 had some Russian early adopter reviews too. Those reviews described it as V shaped.
After Audiosense took some feedback from the Russians, they released a totally retuned AQ7 that was more neutralish.
Strange that the sound "detiorates" when playing with a DAP with low output impedance. These multi driver low resistance/high sensitivity IEMs usually benefit from lower OI in the source isn't it. Too high OI can skew the frequency response.
But I wouldnt put much faith in reviews like that, no idea who it is and could also be lost in translation or just a beta unit.
thesheik137
1000+ Head-Fier
Looking forward to this one, esp if it sounds like a more technical DT200.
Review: https://www.headfonia.com/audiosense-dt600-review/
Review: https://www.headfonia.com/audiosense-dt600-review/
- Joined
- Jan 29, 2010
- Posts
- 7,812
- Likes
- 3,059
Thanks for the share! Article by @nanotechnosLooking forward to this one, esp if it sounds like a more technical DT200.
Review: https://www.headfonia.com/audiosense-dt600-review/
waiting for DT600 and i have AQ0 and DT200 currently!
Liking their tuning so far!
Liking their tuning so far!
Mr.HiAudio
Member of the Trade: RIOBuds
ordered a new DT300 ^_^
will test and compare with DT100/DT200
will test and compare with DT100/DT200
waiting for ur impression! what's your thought on DT200 btw?ordered a new DT300 ^_^
will test and compare with DT100/DT200
Mr.HiAudio
Member of the Trade: RIOBuds
very technical and neutralwhat's your thought on DT200 btw?
Users who are viewing this thread
Total: 7 (members: 0, guests: 7)