cfcubed
1000+ Head-Fier
- Joined
- May 1, 2007
- Posts
- 1,175
- Likes
- 19
You will find his direct email in this post http://www.head-fi.org/forum/thread/497255/exstata-boards#post_6711588
Did the amp work before case up? You should test an amp on the bench before casing it up - its easier to do & it let's you know when any problems originated (e.g. worked pre-casing)
You will need to go through Setup & find all your Vs that deviate from it:
http://cavalliaudio.com/cth/main.php?page=setup
Be careful doing this, I tightly tape pins to my probes leaving only the very tips exposed. Do this w/PCB out of case of course.
BTW one basic thing is OG is NOT = SG (headphone must not be grounded to case...), so you may 1st want to make sure of this before pulling the board (OG-SG ohms) & checking all your setup measurements.
hah!!..well post some pics man if you got it all cased up andworking. Been a long time coming this build.