Gain
New Head-Fier
- Joined
- Feb 1, 2009
- Posts
- 32
- Likes
- 10
does anyone know where to pick up the 2 pin connector used on the UE,AE, and Westone customs?
2 pin connector UE,AE,Westone
- Thread starter Gain
- Start date
hydora
100+ Head-Fier
Use "D-sub pins".
I believe no one sell complete dual pins for UE or so on.
Attachment 23982
Attachment 23983
Attachment 23985
Then shrink them together.
(Pics were taken from here)
I believe no one sell complete dual pins for UE or so on.
Attachment 23982
Attachment 23983
Attachment 23985
Then shrink them together.
(Pics were taken from here)
crapback
100+ Head-Fier
- Joined
- Jul 6, 2009
- Posts
- 362
- Likes
- 11
Thanks hydora. A little ebay searching, $7.40 later, I'll have 100 of them to drop all over the floor.
Now I just need to find some decent light gauge wire and pick up some viablue 3.5's.
crapback
100+ Head-Fier
- Joined
- Jul 6, 2009
- Posts
- 362
- Likes
- 11
Slight problem. The diameter of d-sub pins is too large for UE IEM's.
Anyone out there know what pins are used for the TF10 cables?
Anyone out there know what pins are used for the TF10 cables?
crapback
100+ Head-Fier
- Joined
- Jul 6, 2009
- Posts
- 362
- Likes
- 11
Anyone out there know where to find the UE connector pins? I'm going to end up butchering a replacement cable to get the pins to make a custom for myself.
crapback
100+ Head-Fier
- Joined
- Jul 6, 2009
- Posts
- 362
- Likes
- 11
bumpification in progress
Razr
New Head-Fier
- Joined
- Jan 11, 2010
- Posts
- 5
- Likes
- 11
Try VGA connector pins, worked for me!!
Read here :http://www.head-fi.org/forums/f21/diy-ue-cables-470875/
Read here :http://www.head-fi.org/forums/f21/diy-ue-cables-470875/
racer_x124
100+ Head-Fier
- Joined
- May 1, 2010
- Posts
- 228
- Likes
- 14
How do you guys get proper spacing on the pins?
FallenAngel
Headphoneus Supremus
Estimate, it's not difficult and the construction has a little wiggle room anyway.
ccfoodog
100+ Head-Fier
- Joined
- May 17, 2008
- Posts
- 250
- Likes
- 11
racer_x124
100+ Head-Fier
- Joined
- May 1, 2010
- Posts
- 228
- Likes
- 14
Quote:
I thought about buying those, but for 13$ a pair shipped I can do some testing with old VGA cables first.
yura
New Head-Fier
- Joined
- Mar 28, 2011
- Posts
- 4
- Likes
- 0
Who is the seller on ebay that has them? I would like to check it out. Thanks
VictorHalgaard
WARNING: BAD TRADER
Also known as HeadphoneViking.
- Joined
- Aug 24, 2010
- Posts
- 446
- Likes
- 22
The tip with the VGA pins is awesome!!! Now i can finally make new cables for my customs 
anomalouscode
100+ Head-Fier
- Joined
- May 6, 2010
- Posts
- 191
- Likes
- 10
bump!
cos this thread saved me some cash!
I use my customs everyday and dont really look after them, so cables dont seem to last long with me.
the VGA pin tip worked great on my Earsonics EM3-pros and I'm actually liking the pins more than the originals,.... they're longer meaning they're easier to work with and you can solder more of the cable onto the pin for a stronger bond.
best of all, vga cables are everywhere, and most pc repair / dollar junk shops have them for, well, a dollar. over 30 pins for a dollar!
this might get me started making my own cables
cos this thread saved me some cash!
I use my customs everyday and dont really look after them, so cables dont seem to last long with me.
the VGA pin tip worked great on my Earsonics EM3-pros and I'm actually liking the pins more than the originals,.... they're longer meaning they're easier to work with and you can solder more of the cable onto the pin for a stronger bond.
best of all, vga cables are everywhere, and most pc repair / dollar junk shops have them for, well, a dollar. over 30 pins for a dollar!
this might get me started making my own cables
Users who are viewing this thread
