1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.

    Dismiss Notice

NuForce DAC-100

  1. project86
    Very nice DAC with integrated amp
    Written by project86
    Published Mar 26, 2013
    Pros - Excellent sound - lively, dynamic, natural. Built in headphone amp also very good with certain headphones like HD800, LCD-2, HE-500, etc
    Cons - HP amp has unwelcome background noise making it unsuitable for sensitive headphones, output impedance is also weird.

    NuForce has an interesting history of success. On the one hand, they became famous on the strength of their relatively high end amps and preamps. They still sell plenty of models in their "reference" line, most of which cost at least several thousand dollars. In more recent times they seem to have focused on the opposite end of the market - the budget end - and have achieved success there as well. Products like their HDP, the various Icon compact amplifiers, their NE series of IEMs, and of course the uDac, have cemented their place as a popular maker of affordable gear. 
    I've often wondered what happens to sales on the higher end gear, after a company begins offering budget products. Musical Fidelity did it with their V-series, AMR is doing it through their iFi line, and I'm sure there are other examples that I'm forgetting. Does it drag down the prestige of their expensive products? I can see the awkward feeling when someone buys a $5K amp only to see that some kid down the street has a $200 headphone amp from the same brand. Or does it boost the prestige of the budget line, with the idea of trickle down technology and all that? Or maybe it's a bit of both? Ultimately the budget gear must be profitable or these companies wouldn't be bothering with it. 
    But what about the middle? Gear that costs more than a few hundred dollars but less than several thousand? That's a key area where the price to performance ratio is often at its best. And at $1095, the NuForce DAC-100 fits squarely into that "in between" category - not cheap nor massively expensive. But do they have the price to performance ratio in place? Interestingly, NuForce has other "100 series" components at various prices including the DDA-100 integrated ($549) and the HAP-100 headphone amp ($595). The DAC-100 is the most expensive product in this line by a significant margin. But overall I still categorize the series as  falling somewhere in between budget gear and high-end gear (but I refuse to use the term "mid-fi" as it brings too many implications). 
    The DAC-100 is nicely sized for a headphone based system - 8.5 inches wide, 9 inched deep (but deeper if we count the volume knob and RCA jacks), and about 2 inches tall. This means it will handily fit into most systems, where bigger units from Audio GD and Bryston may have trouble. Weight is about 3 pounds which reflects the enclosure being less overbuilt than some competitors. But it is made of what appears to be copper-plated metal, like an old school Pioneer Elite or Marantz component, so the overall quality seems right. 
    The front panel is simple: 1/4" headphone jack, volume knob which doubles as a standby switch (just press it), 4 dedicated buttons for input selection, and sample rate indicators for 44.1kHz through 192kHz. The back panel is equally straight foward: IEC power receptacle with an actual power on/off switch, voltage selection switch for worldwide compatibility, RCA outputs, and 4 inputs total: Toslink, USB, and a pair of coaxial SPDIF. The unit comes in black or silver, with the silver model still having a black "stripe" across the front panel. The top portion of the enclosure has two sections of venting - one above the headphone amp section, and one above the power supply. The unit doesn't run overly warm but the venting is still a good thing in my book - just in case.
    Inside, the DAC-100 "guts" are divided into several distinct sections. The relatively large torroidal transformer gets isolated from the other components, walled off by a metal shield. The power supply section has 4 voltage regulators attached to a beefy heatsink, augmented by a rather healthy collection of 17 capacitors. Next comes the main board which handles several functions: the actual DAC section based on an AKM AK4390 32-bit DAC chip, the output stage based around dual socketed LM4562 opamps combined with discrete transistors operating in Class-A, the AKM AK4118 24/192 capable digital receiver, a Xilinx Spartan FPGA, some local voltage regulation, and a few other odds and ends. It sounds complex but the layout is actually rather simplistic - not that simple is necessarily bad. The last "section" is the USB board, which appears very similar to the USB implementation I've seen in other NuForce products like the DAC-9, but different than my NuForce DDA-100 where USB is integrated into the main board itself. USB operates in asynchronous mode and the chip itself has NuForce labeling rather than one of the usual suspects like XMOS, VIA, C-Media, or Tenor. 







    Other random bits worth mentioning: 
    *The DAC-100 also works as a preamp. The RCA outputs are variable, being adjusted in conjunction with the headphone amp. Max output is 2 Vrms which is "redbook standard". It's generally best to keep the volume knob maxed for regular DAC use unless you have some need for more attenuation based on the amp being used.
    *Volume adjustments are handled in the digital domain via 32-bit processing for a total of 100 "steps". This could be accomplished through one of two ways - by using the built in volume adjustment in the DAC chip itself, or else by the Xilinx chip seen on the PCB behind the front panel; I'm not sure what route NuForce took here. The adjustment has a somewhat "cheap" feel to it, based on both the physical knob itself (which feels like plastic to me) as well as the action which has little resistance. I've got other DACs with digital volume control that feel great, but somehow in this case the lack of resistance feels weird. It might just be that the knob has more play than I'm used to thanks to the required "push" action for standby activation. Apart from that complaint, the actual functionality of the volume control is excellent. Perfect channel balance, totally free from static or other potentiometer artifacts, and as far as I can hear, no obvious loss of resolution even at lower volumes. Nice. 
    *The DAC-100 ships with a small remote, which I never use. I did try it once and all worked well. It doesn't move the actual knob which means using a combo of remote and physical adjustments will make things confusing. I figure someone will either use one or the other the majority of the time - remote if you mostly use the unit as a preamp, and knob if you tend to use headphones. But my Matrix Quattro DAC, at $400 less than the DAC-100, does manage to have a motorized volume knob. Make of that what you will.
    *NuForce offers drivers for Windows XP, Windows 7, Mac, and Windows 8 (currently in Beta as I type this). No Vista? Not a problem I suspect... I used 2 different computers running Windows 7 and had zero issues. I have read several complaints about static and stuttering though, and even some BSOD crashes. But USB issues can be common with a variety of DACs and I'm hesitant to blame NuForce for what could be a system issue with a few users. All I can say is that everything worked for me, just as it should have. 
    *The design uses oversampling but no upsampling. NuForce refers to it as "questionable data manipulation". Can't say that I agree 100% but that's fine. This means a 44.1kHz signal (for example) will be presented to the DAC chip at the native data rate rather than being upsampling to 192kHz or some other arbitrary sample rate, as done by many competitors. 
    *The single-ended Class A headphone amp is interesting in that it has a constant current source and as such doesn't have an easily definable output impedance. I tried measuring it and got weird results (negative numbers), which echos the findings of user Amaegis (who has also reviewed the DAC-100 by now, though I deliberately skipped reading it until mine is posted). Apparently the Class A design is to blame, in addition to a resistor on the output for protection. In any case NuForce lists the "recommended headphone impedance" as 120-600 ohm. I'll discuss the practical application of this in my listening section.
    *Specs for the headphone amp  - 10.4Vpp 3.7Vrms, 500mW into loads ranging from 300 ohm to 600 ohm (NuForce doesn't list current delivery into lower impedance), 80mA constant current. See extensive measurements of the DAC-100 HERE
    *The DAC section uses some type of buffering which helps with jitter rejection. NuForce doesn't really talk about this much, but it was pointed out to me (by Armaegis) that there's a slight "delay" to the sound being processed - I verified this by connecting the same transport with dual SPDIF outs to the DAC-100 as well as some other DAC, both feeding the same amp. Switching back and forth on the fly, the DAC-100 is maybe a second or so behind. Weird. But it makes sense that they have some type of system in place for jitter reduction since they frown on ASRC. I don't know exactly what the FPGA does in this design but chances are good it plays a role in this delay. 
    *The DAC chip itself is somewhat rare - the AKM AK4390. By specs it is very close to their AK4399 which is used in the Schiit Bifrost, Cary Xciter, and a few Hegel DACs. The only examples I can find using the AK4390 are the Fostex HP-A3 ($499) and the SOtM dAC-200 HD ($2199). Neither of those is very widely used around here. The AKM marketing literature really talks up their minimum-phase FIR filter but the datasheet shows the truth - default setting is a short delay filter, with minimum phase being optional. NuForce doesn't tell us which one gets used in this device. 




    Toroid is by Noratel, who also supplies Benchmark for their DACs

    Xilinx Spartan FPGA

    USB section

    AKM digital receiver towards the bottom, AKM DAC on the left (sorry for the shadow)



    Socketed opamps


    Front panel PCB including separate Xilinx chip

    I used the following gear during my evaluation of the DAC-100, down to the last excruciating detail for those who are interested:
    Source: Cambridge Audio 840C, Acer laptop with and without an Audiophilleo AP1 with PurePower, Auraliti PK90 with NuForce LPS-1 power supply 


    PK90 with 2TB G-Technology drive for storage

    LPS-1 power supply

    AMP: Analog Design Labs Svetlana 2, Icon Audio HP8 MkII, Violectric V200, Auralic Taurus, Stax SRA-12S






    Headphones: Sennheiser HD800, Audeze LCD-2.2 (with C3 Auric Ohno cable), Thunderpants, HiFiMAN HE-400 (CablePro Earcandy) and HE-500 (Toxic Cables Hybrid cable), beyerdynamic T1, Heir Audio Tzar 350, Westone ES5, Sensaphonics 3MAX





    Power Conditioning: CablePro Revelation, Yulong Sabre P18
    AC Cables: CablePro Reverie, Charlestone Cable Company Auric Ohno
    Interconnects: NuForce Focused Field, Charleston Auric Ohno
    Digital cables: NuForce Precision coax, Charleston Auric USB, NuForce Impulse USB, Signal Cable Optical Link
    I first used the DAC-100 as purely a DAC. I used my Cambridge 840C as transport, and fed the DAC-100 RCA out to an Icon Audio HP8 MkII tube amp. I recently reviewed this amp and became very familiar with its sound signature, so I was fairly confident in the contribution of the DAC versus the character of the amp. My first impression: the DAC-100 sounded clear, natural, and detailed, with just a hint of added excitement as compared to a more flat presentation. Not that it's an unbalanced sounding DAC, but compared to something like a Benchmark DAC-1 the old standby term "musical" comes out to play. This implies excitement but also a lack of "digital" feel to the sound, especially on the top end.
    Dynamics are a strong suit - if you dig listening to stuff like Holst, Dvorak, Rachmaninov, or other really dynamic classical, the DAC-100 is excellent. I threw in some of my Sheffield Labs test discs, the XRCD release "Dancing With Drums", and the Reference Recordings CD release of Stravinsky: The Firebird Suite. All sounded startlingly powerful and "large". Some DACs hit all the right notes but just don't sound as lively as they should in terms of macro dynamics - not so the DAC-100.
    I later tried the Reference Recordings HRx hi-res version of the same Stravinsky album, and was able to compare the two versions back to back. I could really tell the difference between them in terms of fine detail as well as openness - the 24-bit/176.4kHz HRx files just sounded better to me than the already excellent CD version. Granted this was not a fair fight - the CD was played through my Cambridge 840C as transport over Toslink, while the HRx version came from a laptop by way of the Audiophilleo converting USB to SPDIF. To be completely thorough I'd have to rip the CD version and play it back to back but honestly I'm too lazy - I already have the HRx version on my HD and I'm not really here to test format differences. In any case, I suspect the power supply is mostly responsible for making this unit sound as "punchy" as it does.
    From that point forward I played all tracks from the laptop. I switched to the Violectric V200 amp and heard the typical smooth, slightly warm presentation. It sounded very slightly more closed in as compared to when I use the Violectric V800 DAC, but the difference wasn't striking. The V200 isn't the most open sounding amp so it's not a major fault of the NuForce. But there was still a good amount of layering as I played "The Persuasions Sing U2", allowing me to pick out each member of the group as well as enjoy their collective sound. While it did sound slightly closed in compared to the V800, it also sounded more bold and energetic, so it was a trade-off. This applied universally whether I used my T1, or LCD-2, or Heir 6.A LE, or anything else. 
    Bass hit very nicely on "Parallax" by Electronic Noise Controller. It's one of my reference bass tracks due to the deep extension yet natural feel, unlike a lot of "bass music" which is fun but way overdone. The Heir Audio 8.A and Thunderpants were both able to dig very deep to the point where I don't think much further could be accomplished - the DAC-100 approached reference level quality in this respect, and the sound was surely more limited by the amp or headphone rather than the DAC. 
    Vocals were nicely done as well, though not on the same level as the bass presentation. I found Livingston Taylor to sound clean and non-sibilant, but I've heard other DACs at this price which do better in terms of realism. Switching from my (more expensive) Resonessence Labs Invicta or Anedio D2 to the DAC-100 gave less of a sense of vocal projection, like I was still in the room with the singer but off to the side - his vocals projecting mainly to the side instead of directly toward me. This is not to be confused with a sucked out midrange or anything major like that - it just didn't quite have the same purity as those other DACs. I got similar results with various singers from Nancy Bryan to Norah Jones to Aretha Franklin. It didn't stick out as being terrible on its own but in comparison to other DACs I did notice it. I'd take care in mating the DAC-100 with certain gear (stock Denon D7000 for example) where the cumulative effect would be more significant. 
    Aside from that, I have nothing major to criticize. The unit has very good attack and decay, a nice even tonal balance with just a hint of excitement, and an impressively accurate imaging. Soundstage is roughly medium in size (among similar priced units), with horizontal spacing average for this class but depth being more impressive. Note that when I talk about the unit sounding "exciting", I don't mean it has some added zing up top. While the highs are certainly present, they sound fairly refined and "non-digital", and don't really shout at the listener as some DACs can. Background is reasonably black though I've heard darker. Microdetails are plentiful if not top of the class - my Violectric, Anedio, and Kao Audio DACs all do better in this area for similar cash. Yet this might actually work in favor of the overall presentation - the DAC-100 has a focus on being lively and dynamic, so it makes some degree of sense that low level detail retrieval is not the focus. If it were, I think some users might find the presentation a bit overwhelming - too much of "everything" all thrown up at once, resulting in a sound that becomes fatiguing over the long term. The DAC-100 is easy on the ears for extended listening, despite the dynamic presentation.
    I did go back and forth between native USB and several USB to SPDIF converters. It was lengthy, time consuming process about which I'll spare you all the boring details. But in summary: the native USB solution is very satisfying. It held its own when compared to a Stello U3 and an Izmo M1 USB to SPDIF converters, both of which are very nice units. It fell slightly behind when compared to the Resonessence Concero, and further still in relation to the reference level Audiophilleo AP1 with PurePower battery option. That set costs more than the whole DAC-100 so the comparison is not really fair, but there it is. Overall though, I'd say the DAC-100 USB is just fine by itself and doesn't really need help from an external DDC. 
    The headphone section on the DAC-100 is sort of a mixed bag for me. At times I find it brilliant, yet other times it is frustrating. Overall I'll still call it one of the better integrated amps out there and at times it goes from good to great with certain headphones. But it's definitely not without its drawbacks. I'll break it down in sections:
    The good - it's clean, rich, and dynamic, with a great sense of timing and pace. This is one of the best integrated amps I've heard when used with the right headphones - I love it with the HD800, and LCD-2 and T1 sound very nice too. There is plenty of drive for all of these models and I never had issues with running out of headroom. The presentation has a sense of ease which is helpful on models like HD800 or T1 which can be edgy on the wrong amp. Despite that, it still matches well with the somewhat laid back LCD-2, not sounding overly dull. That's impressive. The HD800 is an especially good match - in this case it's right up there with the excellent integrated amps in my Anedio D2 and Resonessence Labs Invicta DACs. Those both have advantages with certain other headphones but with HD800 the synergy is undeniable. For someone looking to build a system around the HD800 I'd say give the DAC-100 a shot - seriously, it's that good. 
    The mediocre - despite the bass being punchy and very clean, it doesn't really dig as deep as it could. And those mids are still a bit laid back in terms of vocalists not coming to the forefront of the mix as much as they do with other amps. I suppose this could merely be the amp section acting transparent and serving up the presentation as given to it by the DAC section... I have no way to tell since there isn't an analog input, so I can't try feeding it with a different signal. Again, this is not a major problem, but worth noting nonetheless.
    The bad - noise floor. Period. It's the biggest flaw here by far. It essentially makes this device unsuitable for most sensitive headphones. The Ultrasone Signature Pro is out, as are the Denon D2000-D7000 and the Audio Technica Woodies. Grados? Not ideal. IEMs? Forget it. All this assumes the listener is like me and prefers not to hear an annoying hash sound intruding on their listening. If this was a budget unit costing maybe a few hundred dollars, it would be one thing. But with a 4 digit price tag I expect much more. Once the music plays, the noise is less obvious, but it still takes away from the presentation by clouding the dynamics and micro details. I have no clue what causes this but I wish NuForce was able to address it. 
    As it stands, I certainly do enjoy the amp with the Audeze LCD-2, HiFiMAN HE-400 and HE-500, Sennheiser HD650 and HD800, Thunderpants, and Beyer T1. The low impedance of the planar models doesn't seem to be an issue, and there's just enough gain to drive even my difficult Thunderpants to high levels. I'm still perplexed by the odd output impedance but it ends up being a non-issue due to the high noise floor. Anything with low enough impedance to potentially cause interactions, is probably sensitive enough to reveal the noise problem anyway - with the exception of planars of course. 
    NuForce did send me a revised part for the headphone section. Apparently it allows a bypass of the 15 ohm resistor. Amaegis has tried it in his DAC-100 and doesn't seem super impressed. I'm exceedingly pleased with the synergy with my HD800 as it stands, so didn't bother to install it right away. When I finally got around to opening the case, I found out the newer part was already in there anyway. I haven't bothered playing with the jumper at this point and I'm not sure I ever will. 
    The fact is not lost on me that the above description sounds like it would be absolutely terrible with the HD800. Don't ask me why it works so well - it just does. Rather than sounding lively and exciting in a sort of "on edge" way, with heightened treble peaks, it actually sounds very smooth and controlled but still extended. It doesn't roll off or turn the HD00 into an LCD-2, but it does keep the treble in line with an iron fist. Perhaps the constant current design of the amp section is more capable than the average amp when it comes driving the HD800 and its "interesting" impedance characteristics. Whatever the case, I'll take it. 
    DACs have really come a long way. In the past few years alone, I've seen the price of your average "really good sounding" DAC drop to between $1,000 and $2,000, where prior it had been several times that. Sound approaching state-of-the-art is now a lot more attainable. The only problem with this equation is the expansion of choices, which is not necessarily a bad problem to have.
    So where does the NuForce DAC-100 fit in? I'd say it is definitely worthy of the price, and competes well with models in the same bracket. I definitely prefer it to numerous competitors such as the PS Audio NuWave (too bright and digital sounding), Rega DAC (fun but not very resolving and overly dark), W4S DAC1 (too clinical), and Musical Fidelity M1 (generally unimpressive on many levels). Does it beat out every DAC in the price range? No. The Violectric V800 ($1300) and Matrix X-Sabre ($1099), both offer slightly better overall sound quality. But each has its own unique presentation and neither has a built in amp section much less a (selectively) excellent one like the DAC-100. So it's a tradeoff. And the DAC-100 might actually be better than either of those in certain cases, if the user values a more engaging, lively sound in their DAC. System synergy would definitely come in to play here.
    It's hard not to feel like the DAC market is a bit overcrowded at the moment. NuForce has a tough road ahead of them in terms of distinguishing their DAC-100 from the rest of the pack. Yet I think they deserve to succeed. It's not the perfect DAC but with an exciting, dynamic sound, and lots of functionality, this unit is truly worthy of consideration. That's not something I can say for many competitors. 
      DrSeven likes this.
    1. View previous replies...
    2. project86
      You might look into the NuForce UDH-100. It's similar to the DAC-100 but with only a single input (USB) and the more basic enclosure from the DDA-100. I heard anecdotal information that it has a lower noise floor on the headphone stage, though I haven't confirmed it.
      project86, Apr 12, 2013
    3. HeadphoneAddict
      * Project86, excellent review man. I could never do one this detailed since my health has worsened - it's so much work that you put into this!
      * I have the DAC-100 here and had posted impressions in the Nuforce announcement thread, where I posted very similar things. It's a near perfect match for the HD800, driving them better than my DACmini or maxed Woo WA6. I typically don't enjoy the DACmini nearly as much with HD800, and the tubes I have to put in the WA6 for the HD800 don't work as well when using any other headphones.
      * Still, the Nuforce drives the LCD-2 and HE-500 about as well as the WA6, but neither are as punchy as the DACmini with those phones. The Nuforce DAC section seems to be on par with that of the DACmini and Stello DA100 Signature in overall performance, but not as smooth as the Stello. Like the DACmini, the DAC-100 is more detailed than the Stello or more revealing, but the Stello is more forgiving of poor source material. The Stello USB input is also not nearly as good as the Nuforce or DACmini USB input.
      * The DAC-100 is good enough that I'm using it as my primary source in the bedroom rig, and feeding the RCA output into my HAP-100 (with the HAP-100 RCA out feeding the DACmini, and then feeding the DACmini output into the WA6). But, I haven't turned on the WA6 or EF5 amps in weeks. I mostly use the DAC-100 for source and driving HD800, or the DAC-100 for source plus the HAP-100 or DACmini driving the LCD-2 and HE-500 or IEM.
      * I also found that the DAC-100 high noise floor could be an issue with very sensitive low impedance phones like V-MODA M-100 and D7000. As for the level of engagement of the midrange, it's not bad at all in the DAC-100 but the Nuforce HAP-100 amp paired with this DAC does have a more involving midrange, along with lower noise floor and a bit more power. With the HAP-100 added I don't really need the DACmini or WA6, but I do need them for IEM; and I sometimes enjoy the slightly more engaging mids of the DACmini or WA6 at times.
      * As a DAC/amp combo I prefer the DAC-100 to my old Apogee Mini-DAC which had a slightly aggressive sounding flat soundstage headphone amp, but an excellent DAC. I found even a $180 Travagans Red amp to be an upgrade over the Apogee headphone amp, which still worked well enough with high end Grados and HD600. I'd still prefer to use an external amp with the DAC-100, but with HD800 that isn't necessary and with many other popular orthodyamics the external amp is still optional. The only thing that is an absolute NO with DAC-100 are all my IEM (hiss), and HE-6 (power).
      HeadphoneAddict, Apr 13, 2013
    4. project86
      Thanks Larry, I value your impressions and it looks like you enjoy the DAC-100 a lot, just like I do.
      project86, Apr 14, 2013
  2. Armaegis
    Amazing sound when paired with the right headphones
    Written by Armaegis
    Published Jan 11, 2013
    Pros - fantastic dac, great with Sennheisers
    Cons - noise floor, unsuitable for sensitive headphones
    Full review here: