for me, I had to put on some fairly large foam tips for my zeros, about 13.5mm foam tips, and I recently found out they are insertable in my ears without compressing them at all, so if I had to guess, my ears are on the large side, so size of the hole is not an issue unless it wants me to do...

are you able to eq a blessing 2 to match a blessing 2 dusk, and vice versa? I got salnotes zero, and I like them, to the extent that I stopped looking at headphones for an upgrade and instead am looking at iems, and I fell on timeless, the two blessing 2's and the variations. So im wondering...

The moment anything comes to paying someone digitally when its not a storefront I have no idea what i'm doing and I just consider the object to not exist, wish I could but but its generally something I dont want to do unless I was getting something for a price I cant over look. bass and mids...

Ok, my last iems were crap, i'm not going to pretend otherwise, they were sound liberty 94. while they were crap, they did show me that I can like iems, they were great for blocking sound if not good at canceling it, especially bass sounds like a box fan to the point that I wouldn't even know...

Not sure if this is where it belongs but I don't see a better category. Ok so I tried to get EqualizerAPO64-1.2.1 to work, but I can't get it to function, and i'm extremely hesitant on screwing with audio drivers because of past experiences where I have had to go without any audio for a period...

Ok, got equalizer apo 1.2.1 installed it looked at https://github.com/jaakkopasanen/AutoEq/tree/master/results/oratory1990/harman_over-ear_2018/Sennheiser HD 598 coppied https://github.com/jaakkopasanen/AutoEq/blob/master/results/oratory1990/harman_over-ear_2018/Sennheiser HD 598/Sennheiser HD...

Ok, long story short, I have a blue yeti and I would like to play audio through my headphones to the yeti to get a good idea on if i'm going to far or not far enough with an eq, currently I have it set up how I think it should be based on frequency charts for my headphones and iem, but if I...

SoI have had my headphones for a number of years now, I love them, but there are a few issues I have that had me looking at other headphones and relating these to backups, the big one Im here to ask about now is clamping pressure. these are so light sometimes I forget im wearing them, but over...

I don't have a problem paying more if I am getting something good for the money, currently I get a few years out of the earpads before they just aren't really cleanable anymore. Do you happen to know how they compare to stock pads? my 598's at times I honestly forget im wearing them, and they...

Ok, I have a pair of hd595's and the ear pad is splitting open a a seam. I got it glued, it will likely hold for a good while, but I need a proper replacement. sennheiser proper is 30$ - I really don't want to pay for oem parts at this price when better is cheaper for other brands. Geekria is...

I considered getting a pre made cable till you mentioned just make my own with paracord, but that was more an option of if I couldn't find some pre made cable like I can with ethernet. now that I know I can make my own cable entirely, I think that's the route i'm ultimately going to go, just...

for the wires, I got a set of 30 gauge wires a while ago due to my brothers akg constantly breaking due to flexion damage on the inside, so I said screw it took all his wires out and replaced them with 30 gauge silicone wire, which are far more flexible than any cable/wire I ever came across...

I likely am going to go the hardwire route, however I have something interesting to try first. I got I think 7 or 8 different 2.5 to 3.5 adaptors that work, and one completely broke on me, I also have a headphone cable that the 2.5 jack died on me and nothing goes to the right headphone, but the...

To give a bit more detail, I'm going to replace the normal way a sennheiser hd 598 hooks up I think the official cable is a bit to expensive, and the replacement cables made for it are to fragile due to the way they are potted and how inflexible the wire is, it caused flexion damage which either...

Long story short, I need to diy some cable due to specific needs, im looking for raw cable, not something with male or female ends, but I am not able to find anything on amazon due to everything headphone + cable just brings up stuff I would have to harvest from rather then just cable. Im...

Ok, sorry if this doesn't belong here, This seemed like it would be the most relevant place. I have a sennheiser 598 hd where the original cable broke, replacing the original cable with an official, or as official as I can get cable costs 30-50$ and I said no to that, the replacement that I...

Anyone know of a us supplier for the foam headband thing?  Mine is cracked down the middle and its out of warranty, getting annoying having it pull my hair, and would love a replacement, found one I think. http://www.audiosanctuary.co.uk/sennheiser-foam-headband-pad-for-hd598-beige.html But I...

Anything you can suggest on amazon for flux thats cheap? Around here nowhere sells flux so I had to make due with solder that has flux in it, but seeing as every damned thing I need to solder has one issue or another, I think that whatever solder I use with flux just doesn't cut it. 

I personally use a sennheiser 598, to make damn sure the plug was the issue we unplugged my headphones and burnt off the enamel on the wire and stuck it to the headphone end of the cable when it worked, that's when I went forward with looking into the solution, first it was going to be splicing...

Well, everything I ordered came, repaired the headphones but ran into a few issues.    the wires would not/barely tin, I don't know why, most likely due to soldering iron being a piece of crap, but that was an issue.  VERY small working space in the plug area itself there was only one hole...

The site is somewhere someone else sent me, if possible I would rather get it through amazon prime with a rubbery plastic, as i'm likely going to have to cut into it to make the wire fit, and them glue it, then to make it look nice which it probably a heat shrink sleeve.   You have any...

Ok to make a long story short, my brother bought headphones, again, that were kind of broken... this time instead of a driver, the jack is messed up. Without any planning what so ever, he ripped apart i think an extension cable of mine, and was going to splice the wires, but needed help. Small...

got the multimeter, it was probably the cheapest digital one available, i wasn't there for the purchase, however i'm basing this off of the screw head falling off while putting in the battery... very poor quality material...    it was the speaker sadly, going to be looking into a replacement...

Yea it wasn't the first or second, and there's no visible damage on the cables... damn... thanks.   So I have never used a multimeter before, what settings should I set everything to when I eventually get one to test it out?