Guys i would like to suggest you, if you can't afford the hd800s, there's the hifiman edition XS that's 400 bucks (i even found it 300 euros on A warehouses) and it's a very good planar headphone that have almost the same soundstage and imaging, the bass are also great to be a planar (bass sound...

Ok, i own the lake people g111 mk2 and owned the violectric hpa v222, i noticed that the last was warm during winter but VERY HOT during summer (i live in a country that's pretty hot during summer), for this reason i decided to sell the violectric and keep the lake people that doesn't ever warm...

I tried iems in bed but the silicone tip inside my ears wont make me feel comfortable i usually use the old sennheiser mx 365 and i could stay in bed comfortable due to not be inside the ear canal sadly this pair of earphones are out of production, so i ask id there's something like that or...

Ok, this question is particular, i use my gear often with lights off and usually i turn the amp volume in the same exact position every time, the problem is i have to use the light of my cellphone every time to be able to see the stripes and set it back to my preferred position do you know a...

How difficult is to drive the 600 ohm version compared to the 250 ohm? I switched from a hd 660s 150ohm to the beyer 250ohm so of course the drive is much less sensitive, but how much more the same drive for the 600ohm?

Ok, i will refund the 250 ohm and try both the 880 600 ohm and 1990, probably i will keep both

hello, i bought the beyerdynamic dt 880 250Ω and i like it a lot, this is the first time i try the beyerdynamic drive, i was previously using the hd660s now i'm wondering what's the difference between this and the 600Ω version, and what does enhance (soundstage? imaging? details?), considering...

you probably have your hrir in vb cable that's listened on your tv that's also using dolby atmos, you should first disable the emulation from hesuvi the real dolby atmos is the one you hear in cinemas, i doubt that a tv can replicate atmos, even hesuvi has its atmos hrir but it's just a gimmick...

some dacs have different behaviur in sound, just a slightly bit but it's enough to be heard... the dac inside your tv is probably the one you like most

Isn't cru about the tv's speaker? i mean, this is what that config should do: https://www.reddit.com/r/nvidia/comments/hru4at/using_cru_to_force_nvidia_high_definition_audio/

yes, i did it on purpose, i started recording the hrir without going below to 0.5 headroom, after that i tried multiple recordings almost below 0 headroom to see if the warping effect on the right channels was fixed, i also tried to normalize the hrir in audacity like in this guide There's no...

no i meant i recorded the processed hrir from another audio card, the thing i asked isn't related to impulcifer, it's a different thing, there's no headroom file it's not about clipping or anything, i recorded in many different audio levels, this weird warping audio comes from all the right...

Hello guys, i recently recorded the hrir from my old soundcard connected with an audio interface, my only problem is that i hear all the right channels weird, the left is ok, i don't know if is something related to my ears, can you try for yourself and see if that happens to you too? i attached...

Guys, have someone tried planar headphones with impulcifer?

i could say it's misplaced mics in the ear canal that could affect this, i'm not sure i'm curious how did you find that values?

guys i would like to find a connector like this https://www.amazon.it/Hosa-Stereo-Breakout-3-5-Dual/dp/B000068O5H/ref=sr_1_12?__mk_it_IT=ÅMÅŽÕÑ&crid=10LBDLJH3S3ZG&keywords=3,5mm+mono+to+mono&qid=1694193425&sprefix=3,5mm+mono+to+mono,aps,125&sr=8-12 but with two Male mono 3,5mm instead or at...

ok now i would like to compensate my headphones for this hrir, just to experiment the result for this matter do i need to do an inverse equalization? i would prefer eq my headphones measuring directly with my binaural mics, which program can i use? i mean, i do also have the impulcifer...

Found it! now i know why there's warp in all these measurements... looks like having max volume to get better signal to noise ratio is under some levels, i plotted two of the same recordings made with less volume from MPC and now the warp's gone completely! i also used your awesome program to...

@musicreo can you try cropping this one? i tried multiple times but i'm getting agan this weird warp when the right side stereo is playing i'm mostly testing this music all the other official hrir in hesuvi plays good, i just can't get this hrir working without this warping sound probably...

thank you, yeah i did a ton of different recordings just to see what would have changed so probably that recording have more bass for that reason anyway, Yesterday i tried plugging both the behringer and the u3 in an external hub and yeah, that noise lowered a ton, i tried recording but now i'm...

thx, how this works? where should i connect it? pardon my ignorant question

thanks for the reply, i'm recording Dolby Headphone 2 which isn't in the Hesuvi library, there's a DHT but it's a bit different and with a different reverb, more like a studio i found the problem, as you can see all the impulse responses weren't timed correctly, you can see the start of the...

@jaakkopasanen or someone that can help me solving this enigma i started recording the processed hrir from my old xonar u3 audio card because i like how it sounds, i connected my behringer to the xonar output like this way After that i started recording, looking in audacity i made sure that...

say i want to try to adjust with the .csv file, how do i generate my .csv file? do i need AutoEQ? following your process is not different that using an equalizer directly in eq apo after the hrir? maybe more lightweight for the cpu?

oh wait, do you mean you equalize the 7 .wav measurements of the speakers? by doing so don't you only change the actual room acoustic? in fact impulcifer should process to equalize the room to the harman curve even if you mess with the room measurement i think? maybe i'm wrong