I've been around for a bit but never had any of the newer AKG's. I'm not familiar with the likes of the K712, unlike many of you. I have been looking at everything from a K501 to K702, K712 and so on. I'm leaning to K702 but would like some feedback in the various models. Are there also any...

SIVGA · PHOENIX OVER THE EAR OPEN BACK ZEBRA WOOD DYNAMIC/MOVING-COIL DRIVER HEADPHONES SPECIAL FILM - The uniquely developed polycarbonate film and the independently developed diaphragm structure not only solve the shortcomings of the diaphragm being easily deformed, but also bring a new...

Product: https://www.amazon.com/Topping-Amplifier-ES9018K2M-OPA2134-Decoder/dp/B06X9MB1XW?ref_=ast_sto_dp Original thread on ASR: https://www.audiosciencereview.com/forum/index.php?threads/aimpire-ad10-fake-topping-d10-dac.11244/ Measurement courtesy of Amirm on ASR: USB DAC Audio...

ThieAudio Voyager 3 PRODUCT SPECIFICATIONS Drivers 3 Knowles Balanced Amartures Noise Cancellation 26dB Sensitivity 113dB at 1 kHz Impedance 14 ohm @ 1KHz Frequency Response 20 Hz - 20 kHz Plug Recessed 0.78mm 2Pin Connector 3.5mm Unbalanced Jack Cable Length 1.2 m Cable Material 8 Core...

The Monolith™ M1570 Planar Headphones use a 106mm planar magnetic driver enclosed in a gorgeous, open back housing. It features a plush, padded headband and earpads for comfortable listening over extended periods of time. With an extended soundstage, lush, rich sound, and excellent build...

Full Specs: Model 39414 Style Open Transducer Type Planar Magnetic Magnetic Structure Linear Symmetry Magnets Magnet Type Symmetric Push-Pull Neodymium Driver Size 106mm Maximum Power Handling 5W Maximum SPL >130dB Maximum SPL >130dB Frequency Response 5Hz ~ 50kHz Total Harmonic Distortion Less...

Does anyone know what the wiring is for teh HE4XX with the 3.5mm is? I have a connector and wanted to wire it to take those cables.

I want to put a 4-pin XLR on the end of a TH900 cable and wondering is there way to cut the material piece so it's not loose?

I got two of these and used them with a new XLR DAC and both are beta test crap that does not work. They are also not very friendly to deal with and they should not be selling untested beta products for full price. They also rejected my return so I lost $15 in shipping and the case was closed...

WARNING! AMP IS NOT FULLY BALANCED. IT HAS LOTS OF OUTPUTS BUT IS SE EVEN ON XLR. SOUNDS GOOD BUT IS UNBALANCED. SOME OUTPUTS ARE REVERSED SO L IS R AND R IS L. SOME UNITS ARE DEFECTIVE. ALL THE SELLERS SHOULD READ THIS AND CHANGE THEIR LISTING. Fullly balanced input and balanced output Truly...

Where to buy Amazon Aliexpress Ebay Other

We’ve been involved in the audiophile headphone industry for seven years. In the last year, we noticed a troubling trend, and we got back in the game to address it. Well respected headphone companies have been engaging in a pricing arms race that far outstrips the value of the product, all...

Have a HLLY DMK MK IV DAC amplifier and after a while it starts clicking in the right and the sound gradually deteriorates. If you then power it off and on it will Max out the volume and almost blow the headphones up. I have noticed if you plug the USB out and in it clears for a second and if...

I have two amps that need repairs and looking for recommended places here is CA or open to other states if the shop or technician is good.

Preface I always wanted to do a Thunderpants but had no knowledge on wood turning so in steps vibrolabs.com who I discovered on the T50RP mod thread and he creates these stunning cups along with 3D printed baffle plates etc. along with damping kits. My T50RP History I have some experience...

I wouldn't have made this post unless it was actually worth writing it. Closed back Audeze owners need to read this. Some say the LCD-XC is the worst Audeze, I did note that it had some harshness in the upper mids and highs. I was then reading through a post and a few members had got the Dekoni...

A Community Favorite, Now With Removable Cables When the Massdrop community asked for a closed-back headphone that redefined price-to-performance expectations, the TH-X00 was our answer. Made in collaboration with Fostex, a brand that’s produced innovative audio gear since 1949, these headphones...

So what is the difference in simple terms? The cables have the Left and Right markers on the outside which should match the markers on the headphone. Fostex has the larger pin opposite to what Sennheiser has and the polarity is also reversed. So you mean I can't use Sennhesier cables? You can...

Hi I want to remove the fostex branding off the sides of a T50RP, any clue on how to do it without damaging the plastic. Any ideas.

Which of these DAC's would you pick and why? Hi-Fi AK4490 AKM4118 DSD DAC XMOS XU208 AK4490 USB DSD256 DSD Native DAC MAX9722 Headphone Amplifier,XMOS Asynchronous USB DAC Mini Portable XMOS PCM5102 DAC 32Bit 384K XMOS Asynchronous USB DAC TDA1308 Headphone Amplifier USB Sound Card 2017...

This looks like it might be good but would like someone with knowledge on DAC and Amplifiers to weigh in. It appears to have the same DAC as the Aune x1s but this is 24-bit...

Hi All I am wanting to make some custom cables for Audezes/ZMF, does anyone have a good diagram they could share.

Hi Looking for an owner of a he1000 v1 and v2 to tell me what is the width of the headband where it goes into the metal section? What is the distance between the two screws from the center of each one? What is the size of the holes on the metal along the side? I am working on a custom...

Hi I just bought two connectors and I might terminate a hd 700 cable with them. Does anyone have the diagram for the pins for the DAYUM connectors?

Would like to know a good place to get a variety of cables and the covers that join the left and right channels (not sure what they are called).