Search results for query: *
- Users: murrays
- Order by date
-
RME ADI-2 Pro - DAC, Headamp, an a lot of more stunning features
The heat you describe sounds like it's in the vicinity of 55 degrees C. If it were over 60 you probably wouldn't be able to hold your hand on it for a long time (old time rule of thumb for checking transformers, etc.)- murrays
- Post #212
- Forum: Dedicated Source Components
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
The original Manhatten Project in WWII produced the first atom bomb, which was nicknamed "The Gadget".- murrays
- Post #25,209
- Forum: Jason Stoddard
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
Isn't it only possible to do that in the morning of April 1? (edit: missed out word "do")- murrays
- Post #18,403
- Forum: Jason Stoddard
-
What a long, strange trip it's been -- (Robert Hunter)
I suggest you read about the original "Manhatten Project": you will discover the meanings. These are just project nicknames used by Mike, not the eventual product name.- murrays
- Post #2,343
- Forum: Mike Moffat (Baldr)
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
@Jason Stoddard can you dispel some of these Vidar myths that are surfacing, before it's even been officially launched? I'm sure some of them are nonsense.- murrays
- Post #16,162
- Forum: Jason Stoddard
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
Have you got the latest issue?- murrays
- Post #16,098
- Forum: Jason Stoddard
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
Amps depends on your mains voltage (here it is 230 Volts). I don't see your location disclosed. Use Ohm's law: Amps = Watts / Volts.- murrays
- Post #15,714
- Forum: Jason Stoddard
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
40 Watts... it's on the Schiit website, http://schiit.com/products/freya.- murrays
- Post #15,693
- Forum: Jason Stoddard
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
The problem with bridging stereo amplifiers to make mono block amplifiers is that, while increasing the "headline" power output, each amplifier output "sees" only half of the loudspeaker's load impedance. So low impedance loudspeakers present a more challenging load. In the example above, 4...- murrays
- Post #15,668
- Forum: Jason Stoddard
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
Why do you need a pair of bridged mono blocks? Those speakers appear to have 94dB / 1 Watt sensitivity. How loud did you want them to go? A single stereo Vidar will drive 200 W into 4 ohms. That is +23 dBW, so will put you up to about 120 dB of sound pressure.- murrays
- Post #15,667
- Forum: Jason Stoddard
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
You need to know what the separate impedances are when bi-amping. Just treat the high and low frequency sections as separate speakers and do the maths accordingly.- murrays
- Post #14,832
- Forum: Jason Stoddard
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
Yes, loudspeaker design is such that often sensitivity is sacrificed for other design goals, e.g. small size or better measured specifications. physics means that there's no "free lunch".- murrays
- Post #14,265
- Forum: Jason Stoddard
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
I think it's no different than people who buy cars with powerful motors (e.g. massive V8/V12). How much power do you really need to go to work and pick the kids up from school? It's satisfying when you put your foot down...- murrays
- Post #14,263
- Forum: Jason Stoddard
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
"Choke input" topology has the choke before the capacitors (directly after the rectifier). This has different physics from a "capacitor" input filter, requiring different formulae. You are describing a "pi" type of filter.- murrays
- Post #12,570
- Forum: Jason Stoddard
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
@Jason Stoddard - Do you have specs for running Jotunheim into 8 ohm loads? It looks good for a 3 or 4 watts at least, from the 16 ohm and 32 ohm specs. Or does current limit kick in and spoil it?- murrays
- Post #12,410
- Forum: Jason Stoddard
-
Schiit Ragnarok Amplifier
You can probably rent an isolation transformer for a few days from a place that hires out power tools.- murrays
- Post #1,067
- Forum: High-end Audio Forum
-
Schiit Ragnarok Amplifier
There my be some DC component in your local AC mains supply. That can upset some toroidal transformers. Can you borrow an isolating transformer to see if that helps?- murrays
- Post #1,064
- Forum: High-end Audio Forum
-
Sennheiser HD800S Unveiled!
Can you not use your card via PayPal?- murrays
- Post #3,315
- Forum: High-end Audio Forum
-
Schiit Happened: The Story of the World's Most Improbable Start-Up
Probably not needed if you have 20/20 hearing. However, some of us have an imbalance in our hearing, so a balance control has a useful purpose. Otherwise I typically resort to using an inline L-pad attenuator on one side..- murrays
- Post #9,338
- Forum: Jason Stoddard
-
Sennheiser HD800S Unveiled!
I'll see if a screen capture will work... I dunno - maybe there's some localisation going on? I tried Ctrl-R to refresh the page, but it didn't change. Oh well .- murrays
- Post #1,485
- Forum: High-end Audio Forum
-
Sennheiser HD800S Unveiled!
On that link I posted it just says "AVAILABLE" all in caps. On the right hand side just below "Article Number:506911" and "Choose your colors: [black]". (heh, shades of Henry Ford). Perhaps it is different on other websites?- murrays
- Post #1,482
- Forum: High-end Audio Forum
-
Sennheiser HD800S Unveiled!
I see the new HD800S is marked as "available" on the Sennheiser website now: http://en-de.sennheiser.com/hd-800-s.- murrays
- Post #1,480
- Forum: High-end Audio Forum
-
Schiit Fire and Save Matches! Bifrost Multibit is Here.
... but probably a Simpsons fan ;)- murrays
- Post #889
- Forum: Sponsor Announcements and Deals
-
Schiit Gungnir DAC
BNC panel sockets are female as standard. BNC plugs on cables are male as standard. I suggest you double check with Schiit themselves.- murrays
- Post #2,653
- Forum: Dedicated Source Components
-
Schiit Owners Unite
Darn those pesky details. :)- murrays
- Post #11,052
- Forum: Headphone Amps (full-size)