Electrostatic ear speaker DIY'ers suppliers list

Discussion in 'DIY (Do-It-Yourself) Discussions' started by muamp, Nov 16, 2016.

  1. Muamp
    Hi janosch,

    Here are the cct diags.

    [​IMG]

    [​IMG]

    [​IMG]

    David.
     
    janosch simon likes this.
  2. janosch simon
    nice thx will report when done :D
     
  3. janosch simon
    btw dave you dont have any cnc g-code of the boards you made at hand? :wink:

    cheers janosch
     
  4. Muamp
    Hi janosch,

    I produced CNC generic g-code for the TubeCAD energiser boards, but I didn't make PCBs for the transformer / bias ccts. These were designed and made before I had a CNC, so I used patch board for the bias ccts above, since they are basic and can be made on patch board easily.
    BTW, I don't recommend you make the TubeCAD energiser. There are other DIY energisers which are far better and easier to make.

    David.
     
    Last edited: Jun 13, 2017
    janosch simon likes this.

Share This Page