Rakan
100+ Head-Fier
- Joined
- Jan 7, 2009
- Posts
- 158
- Likes
- 39
Anyone tried the Audioquest Dragonfly with the Samsung galaxy s3 or note 2? I intend to buy a Dragonfly to pair with my Note 2 :rolleyes:
Yes, the micro A plug of the USB OTG cable should switch the Nexus 7 to the USB host mode.
I suppose you has successfully tested the iBasso D2 & the USB micro B cable with a PC.
Could you provide a dmesg output?
<6>[ 1931.646441] usb 2-1: new full speed USB device number 15 using tegra-ehci <6>[ 1931.649204] auto_hotplug: Onlining single CPU, avg running: 180 <4>[ 1931.671054] CPU1: Booted secondary processor <6>[ 1931.671441] Switched to NOHz mode on CPU #1 <6>[ 1931.672207] cpufreq_interactive_input_connect: connect to elan-touchscreen <6>[ 1931.673538] auto_hotplug: CPU1 up. <6>[ 1931.776511] auto_hotplug: Offlining CPU, avg running: 180 <3>[ 1932.113477] usb 2-1: device not accepting address 15, error -71 <6>[ 1932.228923] usb 2-1: new full speed USB device number 16 using tegra-ehci <3>[ 1932.696428] usb 2-1: device not accepting address 16, error -71 <6>[ 1932.810482] usb 2-1: new full speed USB device number 17 using tegra-ehci <5>[ 1932.814452] CPU1: shutdown <6>[ 1932.816541] auto_hotplug: Onlining single CPU, avg running: 180 <6>[ 1932.818571] auto_hotplug: CPU1 down. <6>[ 1932.838477] auto_hotplug: Onlining single CPU, avg running: 230 <4>[ 1932.839107] CPU1: Booted secondary processor <6>[ 1932.839402] Switched to NOHz mode on CPU #1 <6>[ 1932.840607] cpufreq_interactive_input_connect: connect to elan-touchscreen <6>[ 1932.840738] auto_hotplug: CPU1 up. <4>[ 1932.843203] CPU2: Booted secondary processor <6>[ 1932.843405] Switched to NOHz mode on CPU #2 <6>[ 1932.843969] auto_hotplug: CPU2 up. <6>[ 1932.860436] auto_hotplug: Offlining CPU, avg running: 230 <3>[ 1933.021945] usb 2-1: device descriptor read/64, error -71 <3>[ 1933.334956] usb 2-1: device descriptor read/64, error -71 <6>[ 1933.558729] usb 2-1: new full speed USB device number 18 using tegra-ehci <3>[ 1933.772683] usb 2-1: device descriptor read/64, error -71 <5>[ 1933.868010] CPU1: shutdown <6>[ 1933.876927] auto_hotplug: CPU1 down. <3>[ 1934.090424] usb 2-1: device descriptor read/64, error -71 <6>[ 1934.187495] auto_hotplug: Offlining CPU, avg running: 150 <3>[ 1934.191996] hub 2-0:1.0: unable to enumerate USB device on port 1 <5>[ 1935.203468] CPU2: shutdown | |
|
Yes tested with pc running windows 7 and laptop running ubunto both work fine, here is the dmesg output
<3>[ 1932.113477] usb 2-1: device not accepting address 15, error -71
<6>[ 1932.228923] usb 2-1: new full speed USB device number 16 using tegra-ehci
<3>[ 1932.696428] usb 2-1: device not accepting address 16, error -71
<6>[ 1932.810482] usb 2-1: new full speed USB device number 17 using tegra-ehci