Search results for query: *
- Users: cucera
- Order by date
-
Sold some bitcoins; help me spend my monies
Verry good decision. After that you will know what high end headphone sound can do for you. If i may act as a prophet this might be the beginning of a collector’s career:)- cucera
- Post #45
- Forum: High-end Audio Forum
-
Sold some bitcoins; help me spend my monies
The difference 009 to 009s is not that big. But I prefer the new model in the high frequency. I don’t think dynamics and magnetostats offer anything really superiour to an excellent E-stat rig, but can offer more bass impact.- cucera
- Post #25
- Forum: High-end Audio Forum
-
Sold some bitcoins; help me spend my monies
The BHSE is still commercialy available at headamp.com and a really great amplifier dot it is the best Stax amplifier I ever owned, and I had a lot of them. It sounds excellent with every Stax phone I plugged in. The Cabon is only a different flavor. The T2 is supposed to be superior but not...- cucera
- Post #19
- Forum: High-end Audio Forum
-
Sold some bitcoins; help me spend my monies
If you ask this quite general questen and want to spend the amount HE1 is the right answer. If you start studying deeper there are many alternatives. EG go Stax route (MSB Dac > Diy T2 > SR-009S) or Ortho : MSB > Pass 150 > Hifiman Susvara- cucera
- Post #9
- Forum: High-end Audio Forum
-
The Stax Thread III
The frame of the Signature will be dark brown vs black with the Lambda Pro.- cucera
- Post #20,058
- Forum: High-end Audio Forum
-
The Stax Thread III
There is a guy in Germany who does the CCS mod on those T1/006/600 and even 007t. He is verry professional. http://stritt-audio.de/stax-driver-units/ The site is in German, but he speaks reasonable English. Brings those Stax amps closer to the KGST.- cucera
- Post #19,973
- Forum: High-end Audio Forum
-
The Stax Thread III
@ericj https://www.electromod.co.uk/stax/cables/cord-assembly-sr-001-002-stax/- cucera
- Post #16,962
- Forum: High-end Audio Forum
-
The Stax Thread III
well sounds like a SR-009 just with a marvelous black background- cucera
- Post #16,871
- Forum: High-end Audio Forum
-
Stax: SR 002 + Srm 002 and Srm 003 mk2 + Srm 003 impression and appreciation thread
You can allways buy a replacement cable ffor example here https://www.electromod.co.uk/stax/cables/- cucera
- Post #601
- Forum: Portable Headphones, Earphones and In-Ear Monitors
-
Smyth Research Realiser A16
After owning the A8 for 4 years and nearly every Flagship headphone out there I feel quite sure to rate them, starting from best (surly forgotten some I had). All the listed Stax 4070/BHSE > Stax 009 and 007 MK1/BHSE > Hifiman HE-6 /Accuphase pro 3 > Stax SR-407 /313>HD800/Bryston BHA1>...- cucera
- Post #357
- Forum: High-end Audio Forum
-
KGSShv Carbon - hows it sound with the 009s?
My BHSE is Birgir made and it should even sound better than the headamp due to the PSU closer to the amp and better parts.- cucera
- Post #212
- Forum: High-end Audio Forum
-
AUDIOVALVE SOLARIS: a super LUMINARE ?
I have listened to the Solaris extensively. While it was spectacular withe the HE-6 (for me best sound of show) and definatly better than the Luminare the prototype sill falls short of my BHSE or KGSSHv. The bandwith is still too small to take a fight with the heavyweights when you go up with...- cucera
- Post #3
- Forum: High-end Audio Forum
-
The Stax Thread III
I have heared quite a number of 007 and even among MK1s there is variation (roughly said carbon box ones are more neutral SN<705xx) the best is my actual one a verry early SN701xx. But the new one I heard was really good too, a bit more exciting sound as my neutral reference one. So I agree...- cucera
- Post #6,627
- Forum: High-end Audio Forum
-
Did Sennheiser just reveal the Orpheus successor?
This will be far more than my wallet can swallow- cucera
- Post #6
- Forum: High-end Audio Forum
-
The Stax Thread III
Quite normal outcome as the standard meter has an impedance (~6MOhm in this case) that is too low compared to the Output resistor. You build a voltage divider with the meter and the protection resistor. To be sure measure with an Voltmeter with >100MOhm or simply before the 4.7M resistor.- cucera
- Post #5,139
- Forum: High-end Audio Forum
-
The Stax Thread III
My current Stax Rating on my BHSE or KGSSHV except the normal Bias can. 1) Stax SR007 MK1 (SN701xx) Carbon Box and one of the first ever imported to EU 2) Stax SR-007 MK1 (SZ1xxx) 2) Stax SR-009 3) Stax SR-007 MK2 (SN SZ2xxx) 3) Stax SR-X MK3 pro 4) Stax 4070 4) Stax Sigma Pro 5) Stax...- cucera
- Post #5,129
- Forum: High-end Audio Forum
-
AudioValve LUMINARE & VERTO : for Stax headphones and for all dynamic headphones
Why Perhaps my BHSE? Well I can listen to the Luminare myself at a dealer that is only 40km away and the event is roughly 300km from Frankfurt. So I asked on the German Forum who will attend and until now I had only one intersted member. We will see what happens this week.- cucera
- Post #257
- Forum: High-end Audio Forum
-
AUDIOVALVE LUMINARE: an Universal Headphone Amp with three operating modes: Low Impedance / High Impedance (OTL) and STAX
Though question because I don't know the abyss, bit the SR-007 MK1 has the most beautiful voices Of both genders I know and is a clear winner over the LCD3. The best nonelectrostatic contender in this area was my HE-6.- cucera
- Post #197
- Forum: High-end Audio Forum
-
AUDIOVALVE LUMINARE: an Universal Headphone Amp with three operating modes: Low Impedance / High Impedance (OTL) and STAX
Imho the SR-009 and an early SR-007 MK1 fit the same purpose as your proposed Combination and they do have three options for a perfect amplifier: Stax T2, BHSE and KGSSHV:D But this are assertions I am really looking forward to the Luminare - BHSE comparision with the 009 one of the earliest...- cucera
- Post #195
- Forum: High-end Audio Forum
-
The Stax Thread III
Since I have one of the first SR007 MK1 ever made I clearly prefere that headphone on my BHSE to any SR009 I had ever heared. But if Birgir is right there and there are more of the different toned 009 out here as he has one, that might change. Still curious hearing one of those. the last was...- cucera
- Post #4,585
- Forum: High-end Audio Forum
-
Smyth SVS Realiser - PRIR Exchange Thread
Sorry, you did indeed, my error. :cool:No one is questioning your status as one of the most knowledgeable Realiser users.:cool:- cucera
- Post #375
- Forum: High-end Audio Forum
-
Headamp Blue Hawaii Special Edition
Regarding the different 007 Versions Spritzer once wrote the Following (and also in order of Preference) SR-007 Mk1 early version - different driver frame plus some minor material changes, older style carbon fiber box. SR-007 Mk1 late version - the most common of the Mk1's, S/N either 7xxxx...- cucera
- Post #6,903
- Forum: High-end Audio Forum
-
Smyth SVS Realiser - PRIR Exchange Thread
Correct, but the manually optimized HPeQ File could be used with any other PRIR later.- cucera
- Post #373
- Forum: High-end Audio Forum
-
Headamp Blue Hawaii Special Edition
The MK2 has a brighter high end and less sub bass so. But that is not the Problem it is more it sounds off to me.- cucera
- Post #6,899
- Forum: High-end Audio Forum
-
Smyth SVS Realiser - PRIR Exchange Thread
Strange, the SR-009 is imho miles ahead of the HD 800 with the Realiser. It takes time to get a perfect HPEQ. the best Results where when I did it immediately after the PRIR without changing the Mic position. But with the 009 I had also excellent outcoume without any PRIR (even better...- cucera
- Post #363
- Forum: High-end Audio Forum