XMOS XU208 USB BRIDGES - THE LATEST GEN HAS ARRIVED!
Jun 25, 2016 at 1:28 AM Post #2,852 of 3,865
I played around with using either a USB cable and an gender changer with the F-1, or using a USB gender changer from the iUSB 3 and an S/PDIF cable from the F-1 to the Yggy and noticed slight differences, but it was seriously hard to decide which was better. 
 
Jun 25, 2016 at 10:17 AM Post #2,854 of 3,865
My F-1 doesn't seem to play 192kHz or over (coax), and Bughead emperor won't let me select anything under 352.8kHz for DSD playback.
 
Sergey, I bought the X1/X2 for my first LPS, hope it works well.
 
Jun 25, 2016 at 11:38 AM Post #2,855 of 3,865
  My F-1 doesn't seem to play 192kHz or over (coax), and Bughead emperor won't let me select anything under 352.8kHz for DSD playback.
 
Sergey, I bought the X1/X2 for my first LPS, hope it works well.

I listen to 44.1 / 16 Tidal my Dac Dgicon202 collected by Russian engineers can play up to 192/24. Although the settings you can select midi 768000.0 
color]
 
Many thanks rb2013! Excellent sound F1! 


The first business hours!
 
Jun 26, 2016 at 6:07 AM Post #2,856 of 3,865
  I listen to 44.1 / 16 Tidal my Dac Dgicon202 collected by Russian engineers can play up to 192/24. Although the settings you can select midi 768000.0 
color]
 
Many thanks rb2013! Excellent sound F1! 


The first business hours!


Good idea to feed F1 from Teradak only (without any additional devices). Could you compare the differences in sound quality feeding F1 from USB and from Teradak?
 
Jun 26, 2016 at 11:26 PM Post #2,859 of 3,865
 
Good idea to feed F1 from Teradak only (without any additional devices). Could you compare the differences in sound quality feeding F1 from USB and from Teradak?


I have tried every manner of power chain with the F-1 over many months.  The addition of a Recovery or Regen (fed by the TeraDak) adds a much better SQ.  Also the more expensive TeraDak DC-30w with the R-core transformer and pannie caps is better then the X1/X2.
 
I did swap out the caps on one X1/X2 - the generic gray chinese for Nichicon HW super low impedance, high PSRR, to good effect:
 
X1/X2 stock:

 
 
X1/X2 with upgraded Nichicon HW caps:

 
 
DC-30W:

 
Jun 27, 2016 at 10:20 AM Post #2,861 of 3,865
Nichicon HW:
what exactly to buy?
If you can link?


25V 1500uf - http://www.digikey.com/product-search/en/capacitors/aluminum-capacitors/131081?k=&pkeyword=&s=51589&FV=fff40002%2Cfff80009%2Cfffc01ed%2C340059%2Cfc01ea&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25
 
Lifetime @ Temp.​
10000 Hrs @ 105°C
Operating Temperature​
-40°C ~ 105°C
Polarization​
Polar
Applications​
General Purpose
Ripple Current​
2.6A @ 120Hz
Impedance​
16 mOhm
Lead Spacing​
0.197" (5.00mm)
Size / Dimension​
0.492" Dia (12.50mm)
Height - Seated (Max)​
0.866" (22.00mm)
Surface Mount Land Size​
-
Mounting Type​
Through Hole
Package / Case​
Radial, Can
Online Catalog​
HW (UHW) Series
 

 
Jun 28, 2016 at 11:08 AM Post #2,863 of 3,865
As a cheaper and portable alternative to the TeraDak LPS - I've had good success powering various gear (the F-1 and the X-1) with this Li Ion Battery:
 
Original XIAOMI 16000mAh Power Bank
 
http://www.ebay.com/itm/like/151679157835?lpid=82&chn=ps&ul_noapp=true
 
$19.  You could buy two and have one on the charger as the other plays.
 
Using one right now to power the LEX end of the ICRON/Startech GB LAN Iso Audio USB entender - I think in this use it sounds better then the stock TeraDak X1.
 

Users who are viewing this thread

Back
Top